Aqua Creek Products EZ Series User manual

Copyright © 2016 Aqua Creek Products All Rights Reserved Revised 12/12/16
PART #: F-0320HSO-4C
400 LB. [181 kg] MAXIMUM WEIGHT CAPACITY
FOR USE WITH THE EZ LIFT,
POWER EZ LIFT & SUPER POWER EZ LIFT
MANDATORY
LEAVE THIS MANUAL WITH LIFT OWNER
Read and follow all instructions.
Lift safety can only be ensured if the lift is installed and
operated according to these instructions.
• NEVER permit children to play on or around the lift
• Do not allow children to use the lift without adult
supervision
• NEVER use the lift with a dry pool
EZ Series
Hard Seat Option
9889 Garrymore Ln
Missoula, MT 59808
888-687-3552 | [phone]
www.aquacreek.com
Check entire box and all packing materials for parts. Before beginning assembly, read the
instructions and identify parts using the fi gures and parts listed in this document.
It is critical that all parts be carefully inspected prior to installation. If any damage occurred in
transit, Aqua Creek Products, LLC must be notifi ed within three days of receipt of unit.
Proper installation cannot be overstressed, as an improper installation voids Aqua Creek’s
warranty and may affect the safety of the user.
READ CAREFULLY
1

Copyright © 2016 Aqua Creek Products All Rights Reserved Revised 12/12/16
Hard Seat Installation
To install the hard seat option onto an EZ Series lift the sling seat must rst be removed. To do this,
simply unhook the hanger bar from the lift and store the hanger bar, chains and sling seat together.
Note: Actual product may vary slightly from images below.
REMOVE HANGER BAR,
CHAINS AND SLING
Once the sling seat has been removed, add the quick link to the u-bolt that is attached to the lifts boom
arm. Then, attach the 4-point hanger bar to the quick link followed by connecting the chains and hard
seat to the 4-point hanger bar. All pools and spas are dierent so the chains may have to be adjusted
slightly to t specic applications and/or personal needs.
QUICK LINK
4-POINT HANGER BAR
HARD SEAT & CHAINS
U-BOLT
BOOM ARM
2