Arbor Technology ARES-1230 User manual

1
ARES-1230
Series
Fanless Embedded Controller with Intel®
Bay Trail SoC Processor
User’s Manual
Version 1.1
2016.12
P/N: 4016123000110P

- 2 -
This page is intentionally left blank.

- i -
Revision History
Version Date Description
1.0 November, 2015 Initial release
1.1 December, 2016 Add ARES-1230-POS related information

- ii -
Contents
Revision History ............................................................................. i
Preface........................................................................................... iv
Copyright Notice .......................................................................................iv
Declaration of Conformity .........................................................................iv
CE......................................................................................................iv
FCC Class A.......................................................................................iv
RoHS ................................................................................................. v
SVHC / REACH ................................................................................. v
Important Safety Instructions....................................................................vi
Warning ...................................................................................................vii
Replacing Lithium Battery........................................................................vii
Technical Support ....................................................................................vii
Warranty .................................................................................................viii
Chapter 1 - Introduction................................................................ 1
1.1. Product Highlights ............................................................................. 2
1.2. About this Manual .............................................................................. 2
1.3. Specications .................................................................................... 2
1.4. Inside the Package ............................................................................ 4
1.5. Ordering Information.......................................................................... 5
1.5.1. Optional Accessories ............................................................... 5
Chapter 2 - Getting Started........................................................... 7
2.1. Dimensions........................................................................................ 8
2.2. Take A Tour ...................................................................................... 11
2.3. Driver Installation Notes .................................................................. 13
Chapter 3 - System Conguration ............................................. 15
3.1. Board Layout ................................................................................... 16
3.1.1. FMB-1230H (Main Board)...................................................... 16
3.1.2. SCDB-1289A (for ARES-1230-E)........................................... 17
3.1.3. SCDB-1289B (for ARES-1230-E) .......................................... 17
3.1.4. SCDB-1314 (for ARES-1230-POS)........................................ 18
3.2. Jumper & Connectors ..................................................................... 19
3.2.1. Jumpers ............................................................................... 19
3.2.2 Connectors.............................................................................. 29
Chapter 4 - Installation and Maintenance.................................. 55
4.1. Install Hardware............................................................................... 56
4.1.1. Open the upper cover of the Computer ................................. 56
4.1.2. Restore the upper cover ........................................................ 57
4.1.3. Install Memory Module........................................................... 58

- iii -
Contents
Chapter 5 - BIOS.......................................................................... 61
5.1. Main................................................................................................. 64
5.2. Advanced......................................................................................... 65
5.2.1. Boot Conguration ................................................................. 66
5.2.2. PCI Express Conguration..................................................... 66
5.2.3. Video Conguration ............................................................... 67
5.2.4. SATA Conguration................................................................ 68
5.2.5. LM90 Thermal Sensor ........................................................... 69
5.2.6. SIO Fintek 81216/81866D ..................................................... 69
5.3. Security............................................................................................ 70
5.4. Power............................................................................................... 71
5.5. Boot ................................................................................................. 72
5.6. Exit................................................................................................... 73
Appendices .................................................................................. 74
Appendix A: Install mSATA Storage........................................................ 75
Appendix B: Wi-Fi Module Hardware Installation ................................... 77
Appendix C: Install SIM Card ................................................................. 82
Appendix D: Install mPCIe Module ........................................................ 84
D.1 Install Full-Size mPCIe Module ................................................. 84
D.2 Install Half-Size mPCIe Module................................................. 85

- iv -
Preface
Copyright Notice
All Rights Reserved.
The information in this document is subject to change without prior notice in
order to improve the reliability, design and function. It does not represent a
commitment on the part of the manufacturer.
Under no circumstances will the manufacturer be liable for any direct, indirect,
special, incidental, or consequential damages arising from the use or inability
to use the product or documentation, even if advised of the possibility of such
damages.
This document contains proprietary information protected by copyright. All rights
are reserved. No part of this document may be reproduced by any mechanical,
electronic, or other means in any form without prior written permission of the
manufacturer.
Declaration of Conformity
CE
The CE symbol on the computer indicates that it is in compliance with the
directives of the Union European (EU). A Certicate of Compliance is available
by contacting Technical Support.
This product has passed the CE test for environmental specications when
shielded cables are used for external wiring. We recommend the use of
shielded cables. This kind of cable is available from ARBOR. Please contact
your local supplier for ordering information.
Warning
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
FCC Class A
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Preface

- v -
Preface
NOTE:
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
RoHS
ARBOR Technology Corp. certies that all components in its products
are in compliance and conform to the European Union’s Restriction of Use
of Hazardous Substances in Electrical and Electronic Equipment (RoHS)
Directive 2002/95/EC.
The above mentioned directive was published on 2/13/2003. The main purpose
of the directive is to prohibit the use of lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl
ethers (PBDE) in electrical and electronic products. Member states of the EU
are to enforce by 7/1/2006.
ARBOR Technology Corp. hereby states that the listed products do not contain
unintentional additions of lead, mercury, hex chrome, PBB or PBDB that exceed
a maximum concentration value of 0.1% by weight or for cadmium exceed
0.01% by weight, per homogenous material. Homogenous material is dened
as a substance or mixture of substances with uniform composition (such as
solders, resins, plating, etc.). Lead-free solder is used for all terminations
(Sn(96-96.5%), Ag(3.0-3.5%) and Cu(0.5%)).
SVHC / REACH
To minimize the environmental impact and take more responsibility to the earth
we live, Arbor hereby conrms all products comply with the restriction of SVHC
(Substances of Very High Concern) in (EC) 1907/2006 (REACH --Registration,
Evaluation, Authorization, and Restriction of Chemicals) regulated by the
European Union.
All substances listed in SVHC < 0.1 % by weight (1000 ppm)

- vi -
Preface
Important Safety Instructions
Read these safety instructions carefully
1. Read all cautions and warnings on the equipment.
2. Place this equipment on a reliable surface when installing. Dropping it or
letting it fall may cause damage
3. Make sure the correct voltage is connected to the equipment.
4. For pluggable equipment, the socket outlet should be near the equipment
and should be easily accessible.
5. Keep this equipment away from humidity.
6. The openings on the enclosure are for air convection and protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
7. Position the power cord so that people cannot step on it. Do not place
anything over the power cord.
8. Never pour any liquid into opening. This may cause re or electrical shock.
9. Never open the equipment. For safety reasons, the equipment should be
opened only by qualied service personnel.
10. If one of the following situations arises, get the equipment checked by
service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to work
according to the user’s manual.
e. The equipment has been dropped or damaged.
f. The equipment has obvious signs of breakage.
11. Keep this User’s Manual for later reference.
Product Heat
The computer generates heat during operation. Contact the
computer's chassis with your body could cause discomfort or
even a skin burn.

- vii -
Preface
Warning
The Box PC and its components contain very delicately Integrated Circuits (IC).
To protect the Box PC and its components against damage caused by static
electricity, you should always follow the precautions below when handling it:
1. Disconnect your Box PC from the power source when you want to work
on the inside.
2. Use a grounded wrist strap when handling computer components.
3. Place components on a grounded antistatic pad or on the bag that came
with the Box PC, whenever components are separated from the system.
Replacing Lithium Battery
Incorrect replacement of the lithium battery may lead to a risk of explosion.
The lithium battery must be replaced with an identical battery or a battery type
recommended by the manufacturer.
Do not throw lithium batteries into the trash can. It must be disposed of in
accordance with local regulations concerning special waste.
Technical Support
If you have any technical difculties, please consult the user’s manual rst at:
http://www.arbor-technology.com
Please do not hesitate to call or e-mail our customer service when you still
cannot nd out the answer.
http://www.arbor-technology.com
E-mail:[e-mail]

- viii -
Preface
Warranty
This product is warranted to be in good working order for a period of one year
from the date of purchase. Should this product fail to be in good working order
at any time during this period, we will, at our option, replace or repair it at no
additional charge except as set forth in the following terms. This warranty does
not apply to products damaged by misuse, modications, accident or disaster.
Vendor assumes no liability for any damages, lost prots, lost savings or any
other incidental or consequential damage resulting from the use, misuse of, or
inability to use this product. Vendor will not be liable for any claim made by any
other related party.
Vendors disclaim all other warranties, either expressed or implied, including but
not limited to implied warranties of merchantability and tness for a particular
purpose, with respect to the hardware, the accompanying product’s manual(s)
and written materials, and any accompanying hardware. This limited warranty
gives you specic legal rights.
Return authorization must be obtained from the vendor before returned
merchandise will be accepted. Authorization can be obtained by calling or
faxing the vendor and requesting a Return Merchandise Authorization (RMA)
number. Returned goods should always be accompanied by a clear problem
description.

- 1 -
1Chapter 1
Introduction
Chapter 1 - Introduction

- 2 -
Introduction
1.1. Product Highlights
• Intel®Celeron N2930 Quad Core™ 2.16
GHz SoC
• DDR3L 1600MHz SO-DIMM memory
support up to 8GB
• Fanless Design
• Ultra Low Prole Enclosure
• Expandable I/O Module
• Wall Mounting kit
1.2. About this Manual
This manual is meant for the experienced users and integrators with hardware knowledge
of personal computers. If you are not sure about the description herein, consult your
vendor before further handling.
We recommend that you keep one copy of this manual for the quick reference for any
necessary maintenance in the future. Thank you for choosing ARBOR products.
1.3. Specications
System
CPU Intel®Quad-Core Processor N2930
Memory 1 x SO-DIMM 204Pin modules supports up to 8GB DDR3L
-1600MHz
Chipset Intel®SoC
Graphics Intel®HD Graphics
LAN Chipset 2 x Intel®i210AT PCIe controller
Watchdog Timer 1~255 levels reset
I/O
Serial Port
2 x RS-232/422/485 (DB9, Selectable)(ARES-1230-E/ ARES-
1230-POS)
4 x additional RS-232/485 (DB9, selectable)(ARES-1230-
POS)
ARES-1230-E
ARES-1230
ARES-1230-POS

- 3 -
Introduction
USB Port 1 x USB3.0/2.0 + 1 x USB2.0 ports
2 x additional USB2.0 ports (ARES-1230-E)
LAN Port 2 x RJ-45 ports for GbE
Video Port 1 x DVI-I connector
1 x HDMI connector
Audio Mic-in/Line-out
WiFi
1 x SMA antenna hole for optional WiFi function (ARES-1230/
ARES-1230-POS)
2 x SMA antenna holes for optional WiFi function (ARES-
1230-E)
Digital I/O 4 x DI, 4 x DO (ARES-1230-E)
Expansion Bus
1 x Full-Size mPCIE (PCIex1+USB2.0)
1 x Half-Size mPCIE (PCIex1 Lane only)
1 x SIM card socket (ARES-1230-POS)
Environmental
Operating Temp. -20 ~ 70°C (-4 ~ 158°F), ambient with air ow
Storage Temp. -40 ~ 85°C (-40 ~ 185ºF)
Operating Humidity 10 ~ 95% @ 70°C (non-condensing)
Vibration 5~500Hz 3G rms X,Y,Z axis w/SSD, according to IEC 68-2-64
Shock & Crash
40G peak acceleration (11 m sec. duration), operation
60G peak acceleration (11 m sec. duration), non operation
According to IEC 68-2-27
Qualication
Certication CE, FCC Class A
Power Requirement
Power Input DC 12V Input w/ DC-Jack (ARES-1230/ ARES-1230-POS)
DC 9~36V Input w/ 3-PIN Terminal Block (ARES-1230-E)
Power
Consumption
15W (ARES-1230)
20W (ARES-1230-E/ ARES-1230-POS)
Storage
Type 1 x mSATA for SATA interface SSD
Supports 600MB/s HDD transfer rate

- 4 -
Introduction
Mechanical
Construction Aluminum alloy
Mounting Wall-Mount
Weight
770g (1.7lb) (ARES-1230)
900g (1.98lb) (ARES-1230-E)
933g (2.06lb) (ARES-1230-POS)
Dimensions
(W x D x H)
180 x 130 x 25 mm (ARES-1230)
180 x 130 x 40 mm (ARES-1230-E/ ARES-1230-POS)
OS Support
Windows 7 / Windows 8.1 / Windows 7/8.1 Embedded / Windows 10
1.4. Inside the Package
Upon opening the package, carefully inspect the contents. If any of the items
is missing or appears damaged, contact your local dealer or distributor. The
package should contain the following items:
ARES-1230-EARES-1230 ARES-1230-POS
1 x ARES-1230 Series
Fanless Embedded
Controller with Intel®Bay
Trail SoC Processor
1 x Driver CD
1 x User’s Manual

- 5 -
Introduction
1.5. Ordering Information
ARES-1230 Intel®Quad-Core Processor N2930, barebone, 12V Input
ARES-1230-E Intel®Quad-Core Processor N2930, barebone, with
extended I/O, 9~36V Input
ARES-1230-POS Intel®Bay Trail Atom™ N2930 bare-bone, 12V
Input / 6 x COM ports
1.5.1. Optional Accessories
Make the computer more tailored to your needs by selecting one or more
components from the list below to be fabricated to the computer.
PAC-P060W-01 60W AC/DC Adapter Kit
(ARES-1230/ ARES-1230-POS)
PAC-P065W 19V/3.4A 65W AC/DC adapter kit
(ARES-1230-E)
WiFi-AT2130 Atheros AR9462 WiFi module w/ 10cm & 20cm
internal wiring
ANT-D11 1 x Wi-Fi Dual-band 2.4G/5G antenna
MM-3L-2G Industrial DDR3L-1333 2GB SO-DIMM SDRAM
MM-3L-4G Industrial DDR3L-1333 4GB SO-DIMM SDRAM
32GB SSD mSATA MLC 32GB
64GB SSD mSATA MLC 64GB

- 6 -
This page is intentionally left blank.

- 7 -
2Chapter 2
Getting Started
Chapter 2 - Getting Started

- 8 -
Getting Started
2.1. Dimensions
The following illustration shows the dimensions of ARES-1230 series, with the
measurements in width, depth, and height called out.
ARES-1230
180mm
130mm
25mm
Unit: mm

- 9 -
Getting Started
ARES-1230-E
180mm
130mm
40mm
Unit: mm

- 10 -
Getting Started
ARES-1230-POS
180.00
130.00
40.00
Unit: mm
Unit: mm