Arbor Technology Rigid-314 User manual

Rigid-314
Extreme Rugged Fanless Box Computer w/
Intel®AtomTM D2550 Platform
User’s Manual
Version 1.0
2013.08
P/N: 4016313100100P
70

Revision History
Version Date Description
1.0 2013/08 initial release

- i -
Contents
Revision History .......................................................................II
Preface...............................................................................................iii
Copyright Notice .....................................................................................iii
Declaration of Conformity .......................................................................iii
CE....................................................................................................iii
FCC Class B ....................................................................................iii
RoHS .............................................................................................. iv
SVHC / REACH .............................................................................. iv
Important Safety Instructions .................................................................. v
Warning.................................................................................................. vi
Replacing the Lithium Battery ................................................................ vi
Technical Support .................................................................................. vi
Warranty.................................................................................................vii
Chapter 1 - Introduction....................................................................1
1.1. The Product .....................................................................................2
1.2. About This Manual ...........................................................................2
1.3. Specications................................................................................... 3
1.4. Inside the Package ..........................................................................4
1.5. Ordering Information ........................................................................5
1.5.1. Optional Accessories .............................................................5
1.5.2. Congure-to-Order Service.................................................... 6
Chapter 2 - Getting Started...............................................................7
2.1. Dimensions ...................................................................................... 8
2.2. Take a Tour ......................................................................................9
2.2.1. Front View.............................................................................. 9
2.2.2. Rear View ..............................................................................9
2.2.3. Side Views .............................................................................9
2.3. Driver Installation Notice ................................................................10
Chapter 3 - System Conguration ................................................. 11
3.1. Board Layout..................................................................................12
3.2. Jumper and Connectors.................................................................13
3.2.1. Jumper................................................................................. 13
3.2.2. Connectors .......................................................................... 17
Chapter 4 - Installation and Maintenance......................................27
4.1. Install Hardware .............................................................................28
4.1.1. Remove Top Cover ..............................................................28
4.1.2. Install Memory Module......................................................... 29
4.1.3. Install HDD or SSD ..............................................................30
4.1.4. Install WiFi or HSUPA Modules (optional) .......................... 31
4.1.5. Install SIM or CFast Card ....................................................31

- ii -
Contents
4.2. Mount the Computer ......................................................................33
4.2.1. Wall-Mount (optional)........................................................... 33
4.2.2. VESA-Mount (optional) ........................................................34
4.2.3. DIN Rail (optional) ...............................................................36
4.3. Ground the Box PC........................................................................ 38
4.4. Wire the DC-Input Power Source................................................... 39
Chapter 5 - BIOS..............................................................................41
5.1. Main ............................................................................................... 43
5.2. Advanced .......................................................................................44
5.2.1. ACPI Settings.......................................................................45
5.2.2. S5 RTC Wake Settings ........................................................46
5.2.3. CPU Conguration............................................................... 47
5.2.4. IDE Conguration ................................................................48
5.2.5. USB Conguration ...............................................................49
5.2.6. Super IO Conguration ........................................................50
5.2.7. H/W Monitor......................................................................... 52
5.3. Chipset........................................................................................... 53
5.3.1. Host Bridge ..........................................................................54
5.3.2. South Bridge ........................................................................56
5.4. Boot................................................................................................58
5.5. Security .......................................................................................... 59
5.6. Save & Exit ....................................................................................60
Appendices ......................................................................................61
A: Watchdog Timer (WDT) Setting....................................................... 62
B: Digital I/O Setting.............................................................................63
C: HSUPA or WiFi Module Hardware Installation ................................ 65
D: HSUPA or WiFi Module Software & Application Installation ............69
D.1. HSUPA Module ......................................................................69
D.2. WiFi Module ...........................................................................73

- iii -
Copyright Notice
All Rights Reserved.
The information in this document is subject to change without prior notice in
order to improve the reliability, design and function. It does not represent a
commitment on the part of the manufacturer.
Under no circumstances will the manufacturer be liable for any direct, indirect,
special, incidental, or consequential damages arising from the use or inability
to use the product or documentation, even if advised of the possibility of such
damages.
This document contains proprietary information protected by copyright. All
rights are reserved. No part of this document may be reproduced by any me-
chanical, electronic, or other means in any form without prior written permis-
sion of the manufacturer.
Declaration of Conformity
CE
The CE symbol on your product indicates that it is in compliance with the di-
rectives of the Union European (EU). A Certicate of Compliance is available
by contacting Technical Support.
This product has passed the CE test for environmental specications when
shielded cables are used for external wiring. We recommend the use of
shielded cables. This kind of cable is available from ARBOR. Please contact
your local supplier for ordering information.
Warning
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
FCC Class B
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
Preface
Preface

- iv -
instructions, may cause harmful interference to radio communications. How-
ever, there is no guarantee that interference will not occur in a particular instal-
lation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the fol-
lowing measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
RoHS
ARBOR Technology Corp. certies that all components in its products are in
compliance and conform to the European Union’s Restriction of Use of Haz-
ardous Substances in Electrical and Electronic Equipment (RoHS) Directive
2002/95/EC.
The above mentioned directive was published on 2/13/2003. The main pur-
pose of the directive is to prohibit the use of lead, mercury, cadmium, hexava-
lent chromium, polybrominated biphenyls (PBB), and polybrominated diphe-
nyl ethers (PBDE) in electrical and electronic products. Member states of the
EU are to enforce by 7/1/2006.
ARBOR Technology Corp. hereby states that the listed products do not con-
tain unintentional additions of lead, mercury, hex chrome, PBB or PBDB that
exceed a maximum concentration value of 0.1% by weight or for cadmium
exceed 0.01% by weight, per homogenous material. Homogenous material
is dened as a substance or mixture of substances with uniform composition
(such as solders, resins, plating, etc.). Lead-free solder is used for all termina-
tions (Sn(96-96.5%), Ag(3.0-3.5%) and Cu(0.5%)).
SVHC / REACH
To minimize the environmental impact and take more responsibility to the
earth we live, Arbor hereby conrms all products comply with the restriction of
SVHC (Substances of Very High Concern) in (EC) 1907/2006 (REACH --Reg-
istration, Evaluation, Authorization, and Restriction of Chemicals) regulated
by the European Union.
All substances listed in SVHC < 0.1 % by weight (1000 ppm)
Preface

- v -
Important Safety Instructions
Read these safety instructions carefully
1. Read all cautions and warnings on the equipment.
2. Place this equipment on a reliable surface when installing. Dropping it or
letting it fall may cause damage
3. Make sure the correct voltage is connected to the equipment.
4. For pluggable equipment, the socket outlet should be near the equipment
and should be easily accessible.
5. Keep this equipment away from humidity.
6. The openings on the enclosure are for air convection and protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
7. Position the power cord so that people cannot step on it. Do not place
anything over the power cord.
8. Never pour any liquid into opening. This may cause re or electrical
shock.
9. Never open the equipment. For safety reasons, the equipment should be
opened only by qualied service personnel.
10. If one of the following situations arises, get the equipment checked by
service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to work according
to the user’s manual.
e. The equipment has been dropped or damaged.
f. The equipment has obvious signs of breakage.
11. Keep this User’s Manual for later reference.
Preface

- vi -
Warning
The Box PC and its components contain very delicately Integrated Circuits
(IC). To protect the Box PC and its components against damage caused by
static electricity, you should always follow the precautions below when han-
dling it:
1. Disconnect your Box PC from the power source when you want to work
on the inside.
2. Use a grounded wrist strap when handling computer components.
3. Place components on a grounded antistatic pad or on the bag that came
with the Box PC, whenever components are separated from the system.
Replacing the Lithium Battery
Incorrect replacement of the lithium battery may lead to a risk of explosion.
The lithium battery must be replaced with an identical battery or a battery type
recommended by the manufacturer.
Do not throw lithium batteries into the trashcan. It must be disposed of in
accordance with local regulations concerning special waste.
Technical Support
If you have any technical difculties, please consult the user’s manual rst
at: ftp://ftp.arbor.com.tw/pub/manual
Please do not hesitate to call or e-mail our customer service when you still can-
not nd out the answer.
http://www.arbor.com.tw
E-mail:[e-mail]
Preface

- vii -
Warranty
This product is warranted to be in good working order for a period of one year
from the date of purchase. Should this product fail to be in good working order
at any time during this period, we will, at our option, replace or repair it at no
additional charge except as set forth in the following terms. This warranty does
not apply to products damaged by misuse, modications, accident or disaster.
Vendor assumes no liability for any damages, lost prots, lost savings or any
other incidental or consequential damage resulting from the use, misuse of, or
inability to use this product. Vendor will not be liable for any claim made by any
other related party.
Vendors disclaim all other warranties, either expressed or implied, including but
not limited to implied warranties of merchantability and tness for a particular
purpose, with respect to the hardware, the accompanying product’s manual(s)
and written materials, and any accompanying hardware. This limited warranty
gives you specic legal rights.
Return authorization must be obtained from the vendor before returned mer-
chandise will be accepted. Authorization can be obtained by calling or faxing
the vendor and requesting a Return Merchandise Authorization (RMA) number.
Returned goods should always be accompanied by a clear problem description.
Preface

- viii -
This page is intentionally left blank.

- 1 -
Introduction
1Chapter 1
Introduction
Chapter 1 - Introduction

- 2 -
Introduction
1.1. The Product
The Rigid-314 is a wide-temperature computer
to feature the basic and essential features
required for industrial eld.
Loaded with soldered onboard Intel®Atom™ D2550 1.86GHz processor and
chipset of Intel®NM10 PCH, the fanless computer consumes low power while
delivering advanced graphics and intensive computing.
The book-sized computer comes in a small form factor, at only 252 x 199 x 33
mm (9.92” x 7.83” x 1.3”). It is highly portable and suitable for constraint space.
The computer features one Mini-card socket for wireless or HSUPA module, one
DB-44 pin connector for extensive serial ports, six USB2.0 ports, two LAN ports,
one DVI-D and one DVI-I ports for video output, one CFast socket to expand
storage and an audio line-out jack. These features make the computer optimal
for digital signage, info kiosk, gaming, media server and industrial control.
Product Highlights
• Ultra Low Power and Fanless & Cable Less Design
• Wide Range DC Power Input (10 ~ 32V)
• Over-voltage and Reversed Power Input Protection
• Outside Accessible CFast and SIM Slots
• Dual DVI Port Output
• RS-485 Auto-ow Function
• Wide Operating Temperature (-40 ~ 70˚C)
• Easy Installation/Maintenance
• Intel®SSD Compatible
1.2. About This Manual
This manual is meant for experienced users and integrators with hardware
knowledge of personal computers. If you are not sure about the description
herein, consult your vendor before further handling.
We recommend you keep one copy of this manual for the quick reference for any
necessary maintenance in the future. Thank you for choosing ARBOR products.

- 3 -
Introduction
1.3. Specications
System Kernel
Processor Soldered onboard Intel®Atom™ D2550 1.86GHz processor
Chipset Intel®NM10 PCH
Graphics Integrated Intel®GMA 3650
System Memory
1 x 204-pin DDR3 SO-DIMM socket, supporting 800/1066MHz SDRAM
up to 4GB
2GB WT DDR3 memory module installed
Serial ATA 1 x Serial ATA port with 300MB/s HDD transfer rate
Ethernet Controller 2 x Realtek 8111 Gigabit Ethernet controllers
Watchdog Timer 1 ~ 255 levels reset
I/O Ports
Serial Port 2 x RS-232 ports/ 2 x RS-232/422/485 selectable ports with DB-44 pin
connector
USB Port 6 x USB 2.0 ports
LAN 2 x RJ-45 ports for Gigabit Ethernet
Video Port
1 x DVI-I female connector for Digital Video Output
1 x DVI-D female connector for Digital Video output
Digital I/O 1 x 6-bit digital I/O (3 in/3 out)
Audio Line-out
Expansion Bus
1 x Mini-card slot interconnected with SIM card socket for optional WiFi
or HSUPA module
1 x SIM card socket
Storage
Type 1 x 2.5” drive bay for HDD/SSD
1 x CFast socket
Qualication
Certication CE, FCC Class B
Environmental
Operating Temp. -40 ~ 70°C (-40 ~ 158°F), ambient w/ air ow
Storage Temp. -40 ~85 °C (-40 ~ 185°F)
Operating
Humidity 10 ~ 95% @ 70°C (non-condensing)
Vibration 3 Grms/5 ~ 500 Hz/random operation
Shock Operating 40G (11ms), Non-operating 80G with SSD/CFast

- 4 -
Introduction
Mechanical
Construction Aluminum alloy
Mounting Wall-mount/VESA-mount/Din rail mounting
Weight 1.89 kg (4.16 lb) (Bare-bone)
Dimensions
(W x D x H) 252 x 199 x 33 mm (9.92” x 7.83” x 1.3”)
OS Support Windows XP Embedded / Windows XP Professional / Windows
Embedded 7 Professional / Windows Embedded 7 Standard
Power Requirement
Power Input DC 10~32V input (w/ 3-pin DC input terminal block)
Power Consumption Max. 30W
1.4. Inside the Package
Upon opening the package, carefully inspect the contents. If any of the items
is missing or damaged, contact your local dealer or distributor. The package
should contain the following items:
1 x Rigid-314 Extreme Rugged Fanless
Computer
1 x Driver CD
1 x User’s Manual
PAC-P065W
19V/3.4A 65W AC/DC adapter kit
VMK-3100
VESA mount kit
CBL-7100-COM
4 x COM ports converter cable

- 5 -
Introduction
1.5. Ordering Information
Rigid-314 Fanless embedded controller
1.5.1. Optional Accessories
The following items are normally optional, but some vendors may include them
as a standard package, or some vendors may not carry all the items.
DRK-001 Din rail kit of FPC series
WMK-3100 Wall-mount kit

- 6 -
Introduction
1.5.2. Congure-to-Order Service
Make the computer more tailored to your needs by selecting one or more
components from the list below to be fabricated to the computer.
SSD-25040 Intel®2.5” 40GB SATAII SSD kit
HSPA-SI1400 HSUPA 3.75G module kit & internal wiring
WIFI-IN1300 Intel®Centrino®Advanced-N 6205 WiFi module w/
20cm internal wiring
ANT-D11 1 x WiFi Dual-band 2.4G/5G antenna
ANT-H11 1 x 2dBi HSUPA antenna
4GB WT SO-DIMM Wide-Temperature 4GB DDR3-1333 SDRAM

- 7 -
Getting Started
2Chapter 2
Getting Started
Chapter 2 - Getting Started

- 8 -
Getting Started
2.1. Dimensions
Unit: mm
The following illustration shows the dimension of Rigid-314, with the
measurements in width, depth, and height called out.

- 9 -
Getting Started
2.2. Take a Tour
2.2.1. Front View
The computer has some I/O ports, status LED light and controls on the front and
rear panels. The following illustrations show all the components called out for
Rigid-314.
2.2.2. Rear View
LAN
USB 2.0
DVI-D DVI-I COM1~COM4 Line-out
DC-IN
2.2.3. Side Views
Digital I/O
CFast slot
SIM slot
power
HDD
indicator
antenna
hole
antenna
hole
USB 2.0

- 10 -
Getting Started
2.3. Driver Installation Notice
The computer supports the operating systems of Windows 7 and XP. For these
operating systems, nd the necessary device drivers on the CD that comes with
your purchase. For different operating systems, the installation of drivers may
vary slightly, but generally they are similar. DO install Chipset→Graphics before
the rest to prevent errors. The path to nd the device drivers on CD:
Windows 7
Device Driver Path
Chipset CHIPSET\WIN7\32
Graphics GRAPHIC\WIN7\32
LAN LAN\WIN7\32
Audio AUDIO\WIN7\32
Windows XP
Device Driver Path
Chipset CHIPSET\XP
Graphics GRAPHIC\XP
LAN LAN\XP\REALTEK_8111E_XP_32
Audio AUDIO\XP