Arbor Technology FPC-810 Series User manual

1
FPC-810X Series
FPC-8108W-G1
FPC-8109-G1
Robust Box PC with Intel®10th Generation
CoreTM i9/i7/i5/i3 Processor
User’s Manual
Version 1.0
2022.01
P/N: 4016810001100P

- 2 -
This page is intentionally left blank.

- i -
Revision History
Version Release Time Description
1.0 2022.01 Initial release

- ii -
Contents
Revision History ............................................................................. i
Contents......................................................................................... ii
Preface............................................................................................ v
Copyright Notice.................................................................................. v
Declaration of Conformity.................................................................... v
CE ............................................................................................... v
FCC Class A................................................................................ v
RoHS...........................................................................................vi
SVHC / REACH...........................................................................vi
Important Safety Instructions .............................................................vii
Warning.............................................................................................viii
Replacing Lithium Battery .................................................................viii
Technical Support..............................................................................viii
Warranty..............................................................................................ix
Chapter 1 - Introduction................................................................ 1
1.1. The Computer .............................................................................. 2
1.2. About this Manual......................................................................... 2
............................................................................... 3
1.4. Inside the Package....................................................................... 6
1.5.1. Optional Accessories......................................................... 6
............................................... 6
Chapter 2 - System Overview....................................................... 8
2.1. Dimensions .................................................................................. 9
2.2. Take A Tour................................................................................. 10
2.2.1. FPC-8108W-G1 / FPC-8109-G1..................................... 10
2.3. Driver Installation Notes............................................................. 12
Chapter 3 - System Conguration ............................................. 13
3.1. Board Layout.............................................................................. 14
3.2. Jumpers and Connectors........................................................... 18
3.2.1. Jumpers .......................................................................... 18
3.2.2. Connectors...................................................................... 19
Chapter 4 - Installation and Maintenance.................................. 33
4.1. Install Hardware ......................................................................... 34
4.1.1. Open the Computer......................................................... 34
4.1.2. Install CPU ...................................................................... 37
4.1.3. Install/Uninstall Memory Modules ................................... 40
4.1.4. Install Wi-Fi Module......................................................... 44
4.1.5. Install/uninstall SIM Card ................................................ 48
4.1.6. Install SATA Storage Devices.......................................... 51
4.1.7. Install PCI and PCI Express Cards ................................ 53
Contents

- iii -
Contents
4.1.8. Install/uninstall CFast Card ............................................. 53
4.1.9. Install graphic cards (For FPC-8108W-G1)..................... 55
4.1.10. Install graphic cards (For FPC-8109-G1)...................... 57
4.1.11. Install/uninstall SIM Card............................................... 59
4.2. Ground the Computer ................................................................ 61
4.3. Wire DC-in Power Source.......................................................... 61
4.3.1 Automation Mode ............................................................. 61
4.3.2 Vehicle Application Mode ................................................. 62
Chapter 5 - BIOS.......................................................................... 65
5.1. Main ........................................................................................... 68
5.2. Advanced ................................................................................... 69
 .......................................................... 70
5.2.2. Trusted Computing.......................................................... 72
5.2.3. ACPI Settings.................................................................. 73
 ................................................... 74
5.2.5. Hardware Monitor............................................................ 77
5.2.6. S5 RTC Wake Settings ................................................... 78
5.2.7 AMI Graphic Output Protocol policy ................................. 79
5.2.8. PCI Sybsystem Settings ................................................. 80
 .......................................................... 81
 .................... 83
........................ 84
5.2.11. NVMe  ............................................................................. 85
5.3. Chipset....................................................................................... 86
5.4. Security ...................................................................................... 92
5.4.1. Security Boot................................................................... 93
5.5. Boot............................................................................................ 94
5.6. Save & Exit................................................................................. 96
Appendices .................................................................................. 97
A: Digital I/O Setting.......................................................................... 98
B: Watchdog Timer (WDT) Setting.................................................. 101

- iv -
This page is intentionally left blank.

- v -
Preface
Copyright Notice
All Rights Reserved.
The information in this document is subject to change without prior notice in
order to improve the reliability, design and function. It does not represent a
commitment on the part of the manufacturer.
Under no circumstances will the manufacturer be liable for any direct, indirect,
special, incidental, or consequential damages arising from the use or inability
to use the product or documentation, even if advised of the possibility of such
damages.
This document contains proprietary information protected by copyright. All rights
are reserved. No part of this document may be reproduced by any mechanical,
electronic, or other means in any form without prior written permission of the
manufacturer.
Declaration of Conformity
CE
The CE symbol on the computer indicates that it is in compliance with the

by contacting Technical Support.
          
shielded cables are used for external wiring. We recommend the use of
shielded cables. This kind of cable is available from ARBOR. Please contact
your local supplier for ordering information.
Warning
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
FCC Class A
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Preface

- vi -
Preface
NOTE:
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
RoHS
         
are in compliance and conform to the European Union’s Restriction of Use
of Hazardous Substances in Electrical and Electronic Equipment (RoHS)
Directive 2002/95/EC.
The above mentioned directive was published on 2/13/2003. The main purpose
of the directive is to prohibit the use of lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl
ethers (PBDE) in electrical and electronic products. Member states of the EU
are to enforce by 7/1/2006.
ARBOR Technology Corp. hereby states that the listed products do not contain
unintentional additions of lead, mercury, hex chrome, PBB or PBDB that exceed
a maximum concentration value of 0.1% by weight or for cadmium exceed

as a substance or mixture of substances with uniform composition (such as
solders, resins, plating, etc.). Lead-free solder is used for all terminations
(Sn(96-96.5%), Ag(3.0-3.5%) and Cu(0.5%)).
SVHC / REACH
To minimize the environmental impact and take more responsibility to the earth

(Substances of Very High Concern) in (EC) 1907/2006 (REACH --Registration,
Evaluation, Authorization, and Restriction of Chemicals) regulated by the
European Union.
All substances listed in SVHC < 0.1 % by weight (1000 ppm)

- vii -
Preface
Important Safety Instructions
Read these safety instructions carefully
1. Read all cautions and warnings on the equipment.
2. Place this equipment on a reliable surface when installing. Dropping it or
letting it fall may cause damage
3. Make sure the correct voltage is connected to the equipment.
4. For pluggable equipment, the socket outlet should be near the equipment
and should be easily accessible.
5. Keep this equipment away from humidity.
6. The openings on the enclosure are for air convection and protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
7. Position the power cord so that people cannot step on it. Do not place
anything over the power cord.
8. 
9. Never open the equipment. For safety reasons, the equipment should be

10. If one of the following situations arises, get the equipment checked by
service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to work
according to the user’s manual.
e. The equipment has been dropped or damaged.
f. The equipment has obvious signs of breakage.
11. Keep this User’s Manual for later reference.

- viii -
Preface
Warning
The Box PC and its components contain very delicately Integrated Circuits (IC).
To protect the Box PC and its components against damage caused by static
electricity, you should always follow the precautions below when handling it:
1. Disconnect your Box PC from the power source when you want to work
on the inside.
2. Use a grounded wrist strap when handling computer components.
3. Place components on a grounded antistatic pad or on the bag that came
with the Box PC, whenever components are separated from the system.
Replacing Lithium Battery
Incorrect replacement of the lithium battery may lead to a risk of explosion.
The lithium battery must be replaced with an identical battery or a battery type
recommended by the manufacturer.
Do not throw lithium batteries into the trash can. It must be disposed of in
accordance with local regulations concerning special waste.
Technical Support
󰀩
http://www.arbor-technology.com

out the answer.
E-mail:[e-mail]

- ix -
Preface
Warranty
This product is warranted to be in good working order for a period of one year
from the date of purchase. Should this product fail to be in good working order
at any time during this period, we will, at our option, replace or repair it at no
additional charge except as set forth in the following terms. This warranty does


other incidental or consequential damage resulting from the use, misuse of, or
inability to use this product. Vendor will not be liable for any claim made by any
other related party.
Vendors disclaim all other warranties, either expressed or implied, including but

purpose, with respect to the hardware, the accompanying product’s manual(s)
and written materials, and any accompanying hardware. This limited warranty

Return authorization must be obtained from the vendor before returned
merchandise will be accepted. Authorization can be obtained by calling or
faxing the vendor and requesting a Return Merchandise Authorization (RMA)
number. Returned goods should always be accompanied by a clear problem
description.

- x -
This page is intentionally left blank.

- 1 -
1Chapter 1
Introduction
Chapter 1 - Introduction

- 2 -
Introduction
1.1. The Computer
• Supports NVIDIA® GTX-16 series up to 150W GPU
• Wide range DC power input (9~36V)
• Two independent displays support ( HDMI x1 + VGA x 1 and DVI-D x 1)
• 󰀨
• TPM2.0 support
• 1 x mPCIe for optional WiFi/3G/4G/GPS or I/O expansion supported
• 1 x M.2 E Key (2230) for WiFi/BT
• 1 x M.2 (NGFF) B-Key(2242/3052/2280) socket for storage or 5G /
LTE(FPC-8108W-G1)
• Up to 5x expansion slot support(FPC-8109-G1)
• 1 x 2.5 Gigabit LAN support
• Front-accessible I/O support
1.2. About this Manual
This manual is meant for the experienced users and integrators with hardware
knowledge of personal computers. If you are not sure about the description
herein, consult your vendor before further handling.
We recommend that you keep one copy of this manual for the quick reference
for any necessary maintenance in the future. Thank you for choosing ARBOR
products.

- 3 -
Introduction
1.3. Specications
System
CPU Intel®10th generation Core™ i9/i7/i5/i3 processor in LGA1200
socket
Memory 2 x 260-pin DDR4 SO-DIMM sockets, supporting 2933 MHz
SDRAM up to 64GB
Chipset Intel®H420E (FPC-8108W-G1) / W480E (FPC-8109-G1)
Graphics Integrated Intel®HD Graphics
ATA 2 x Serial ATA ports with 600MB/s HDD transfer rate
LAN Chipset
1 x Intel®WGI225LM 2.5GigE LAN
1 x Intel®WGI211AT GbE controllers
1 x Intel®WGI219LM GbE controller (w/o iAMT, H420E)
(w/ iAMT, W480E)
Watchdog Timer 1~255 levels reset
I/O
Serial Port 
4 x RS-232 ports via DB-9 connectors
USB Port 6 x USB 3.2 Gen1 / 2.0 ports
2 x USB 2.0 ports
Internal USB dongle (Optional)
LAN 3 x RJ-45 ports for GbE
Video Port
1 x HDMI
1 x DB-15 female connector for Analog RGB
1 x DVI-D female connector for digital video output
*Support 2 independent displays
*Support 3 independent displays (W480E, only)
Selectable Port 1 x DB25 connector for DIO (8 in/8 out) port or LPT port (either
one, default is DIO)
Audio Mic-in/Line-out

- 4 -
Introduction
Expansion Bus
1 full-size Mini-card interconnected with SIM card for optional
WiFi/3G/4G/GPS or I/O Expansion (PCIe x 1+USB2.0)
1 x SIM socket
1 x M.2 E key (2230) with PCIex1+USB2.0, for Wireless
1 x M.2 B key ( 2242/3052/2280 ) w/ (PCIex2+USB3.0+SATA )
interconnected with SIM for 5G / LTE expansion or for storage
(either one) (FPC-8108W-G1)
3 x PCIe x 4 slot
1 x PCIe x16 slot (via x8 lanes)
Support up to 150W GPU (FPC-8108W-G1)
4 x PCI
1 x PCIe x16 slot
Support up to 150W GPU (FPC-8109-G1)
Environmental
Operating Temp.

fanless)

fanless)
-20~45°C (-4 ~ 112°F), w/ GTX-1660 GPU
Storage Temp. -40 ~ 85°C (-40 ~ 185°F)
Operating
Humidity 10 ~ 95% @ 70°C (non-condensing)
Vibration 3 Grms/5~500Hz/random operation w/ SSD
Shock Operating 40G (11ms), Non-operating 60G with SSD
Qualication
Certication CE, FCC Class A
Power Requirement
Power Input DC 9~36V input Max. 16A/300W (w/ 4-pin DC input terminal
󰀨
Ignition Switch 2-pin teminal block: IGN, GND
Power
Consumption
MAX 65W (w/35W TDP CPU, w/o I/O card)
MAX 95W (w/65W TDP CPU, w/o I/O card)
Storage
Type 2 x 2.5” drive bays
1 x CFast socket, can be outside accessible
Mechanical
Construction Aluminum alloy
Mounting Wall-mount

- 5 -
Introduction
Weight 7.35kg (16.20Ib )
Dimensions
(W x H x D) 225 x 292 x 190mm (8.86” x 11.50” x 5.51”)
OS Support
Windows 10 IOT Enterprise 64-bit
Linux (Kernel:4.9)
Ordering Information
FPC-8109-G1
Ruggedized Edge AI commputing Box PC with Intel®10th Gen
CoreTM i9/i7/i5/i3 w/ expansion fan and PEG 8-pin power cable
Supporting NVIDIA®150W GPU
FPC-8109-G1 Robust Box PC with Intel®10th Gen CoreTM i9/i7/i5/i3 w/ expansion
fan and PEG 8-pin power cable Supporting NVIDIA®150W GPU

- 6 -
Introduction
1.4. Inside the Package
Upon opening the package, carefully inspect the contents. If any of the items
is missing or appears damaged, contact your local dealer or distributor. The
package should contain the following items:
1 x FPC-8108W-G1/
FPC-8109-G1
Robust System
1 x User’s Manual
1.5.1. Optional Accessories
The following items are normally optional, but some vendors may include them
as a standard package, or some vendors may not carry all the items.
WMK-7000 Wall-mount kit for FPC-7XXX Series
PAC-120W6B-FSP 120W AC/DC adapter kit w/ 2-pin/3-pin/4-pin block
PAC-180W6C-FSP 180W AC/DC adapter kit w/ 2-pin/3-pin/4-pin block
PAC-280W6C-MW 280W AC/DC 24V adapter kit w/ 2-pin/3-pin/4-pin
block
1.5.2. Congure-to-Order Service
Make the computer more tailored to your needs by selecting one or more
components from the list below to be fabricated to the computer.

- 7 -
Introduction
240GB SSD Intel®2.5” 240GB SATAIII SSD kit
WIFI-IN2550 Intel AX200NGW M.2 Wi-Fi 6 module w/ 2 x 30cm internal
wires
ANT-H11 1 x 2dBi HSUPA antenna
ANT-D11 1 x WiFi dual-band 2.4G/5G antenna
Core™ i9-10900E Intel®10th Gen. Core™ i9-10900E processor, L2/20M,
2.8G
Core™ i9-10900TE Intel® 10th Gen. Core™ i9-10900TE processor, L2/20M,
1.8G
Core™ i7-10700E Intel®10th Gen. Core™ i7-10700E processor, L2/16M,
2.9G
Core™ i7-10700TE Intel®10th Gen. Core™ i7-10700TE processor, L2/16M,
2.0G
Core™ i5-10500E Intel®10th Gen. Core™ i5-10500E processor, L2/12M,
3.1G
Core™ i5-10500TE Intel®10th Gen. Core™ i5-10500TE processor, L2/12M,
2.3G
Core™ i3-10100E Intel®10th Gen. Core™ i3-10100E processor, L2/6M, 3.1G
Core™ i3-10100TE Intel®10th Gen. Core™ i3-10100TE processor, L2/6M,
2.3G
MK-4C-
4G/8G/16G/32G
DDR4-2400 4GB/8GB/16GB/32G(2933) SDRAM DIMM
kit
MK-4I-
4G/8G/16G/32G
WT, DDR4-2400 4GB/8GB/16GB/32G(DDR4-2933)
SDRAM DIMM kit

- 8 -
2Chapter 2
System Overview
Chapter 2 - System Overview