Arbor Technology Em104P-i6023 User manual

User's Manual
Em104P-i6023
Intel Celeron ULV 400MHz board with
VGA/LCD, TV-out, audio, dual
Ethernet, CF socket, PC/104 and
PC/104 Plus interface
Version 1.1

Copyright© 2002
All Rights Reserved.
The information in this document is subject to change without prior notice in
order to improve the reliability, design and function. It does not represent a
commitment on the part of the manufacturer.
Under no circumstances will the manufacturer be liable for any direct,
indirect, special, incidental, or consequen-tial damages arising from the use or
inability to use the product or documentation, even if advised of the possibility
of such damages.
This document contains proprietary information protected by copyright. All
rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic, or other means in any form without prior written
permission of the manufacturer.

Warning
Single Board Computers and their components contain very delicate
Integrated Circuits (IC). To protect the Single Board Computer and its
components against damage from static electricity, you should
always follow the following precautions when handling it :
1. Disconnect your Single Board Computer from the power source when you
want to work on the inside
2. Hold the board by the edges and try not to touch the IC chips, leads or
circuitry
3. Use a grounded wrist strap when handling computer components.
4. Place components on a grounded antistatic pad or on the bag that came
with the Single Board Computer, whenever components are separated
from the system
5. The CPU need the Heat Sink on it.
TT
TT
Technical Supporechnical Suppor
echnical Supporechnical Suppor
echnical Supportt
tt
t
If you have any technical difficulites, please consult the user's manual first
at:
ftp://ftp.arbor.com.tw/pub/manual
Please do not hesitate to call or e-mail our customer service when you still
can not find out the answer.
http://www.arbor.com.tw
E-mail:[e-mail]

Specifications
System
•CPU : Intel Ultra Low Voltage Embedded Celeron 400MHz to Pentium3
933MHz processor with FSB 100/133 MHz EBGA package.
•Chipset : VIA VT8606 TwisterT with Integrated Savage4 AGP 4X Graphics
core and VT82C686B Super "South Bridge"
•BIOS : AWARD®
Flash BIOS
•L2 Cache : Integrated on CPU (256 KB ~ 512 KB)
•DRAM Memory : Onboard SODIMM socket up to 512MB of SDRAM
•Enhanced IDE with UltraDMA : supports 2 port and up to 4 ATAPI
devices, Ultra DMA transfer 33 / 66 and 100 MB/sec.
•Real-time Clock : built-in chipset with lithium battery backup(built on
carrier board). CMOS data backup of BIOS setup and BIOS default.
Multiple I/O
•Serial Ports :
Three RS-232C port (COM1, 3, 4)
One RS-232C/422/485 port (COM2)
•USB : Two 2x5 Pin header supports up to 4 USB 1.1 devices
•Ethernet : Two Realtek 8100BL 10/100MBPS
•Parallel Port : 1 x parallel port supports SPP/EPP/ECP mode
•Keyboard and Mouse : One 1x6 pin wafer connector for PS/2 Keyboard and mouse
•Audio Chipset: VIA VT82C686B, AC97 2.0 compliant, Multistream Direct
Sound and Direct Sound 3D acceleration.

Display Controller
•Chipset : 4x AGP S3 Savage4 3D and S3 Savage 2000 2D engines
integrated in VT8606 supports up to 32MB of Shared Memory
•Display Type : Flat Panel and CRT displays up to 1280x1024 @ 32 bpp
- Lcd interface : Flat Panel 36-bit TFT/DSTN interface
- LVDS interface(PBE-1000) : Scalable Bandwidth is ranging from
25MHz~112MHz(VGA~SXGA) 18/36-bit one/two channel LVDS interface
- TV-Out : Support NTSC,PAL NTSC-EIA(Japan) formats . Support 640x480
resolutions
•Resolution: Single Channel of LVDS / 36-bit of TTL and 12-bit of TMDS; all
resolutions are supported up to 1280x1024.
Mechancial
•Dimension (L x W): 114 x 95 mm (4.5" x 3.7")
•Operative Humidity: 5% ~ 95% (non condensing)
•Operating Temperature : 0 to 60°C (32 to 140°F)

Packing listPacking list
Packing listPacking list
Packing list
Before you begin installing your single board computer, please make sure that
the following materials have been shipped:
> 1 x Em104P-i6023
> 1 x Quick Installation Guide
> 1 x CD-ROM ( for driver used)
> 1 x Warranty Card

Packing listPacking list
Packing listPacking list
Packing list
Before you begin installing your single board computer, please make sure that
the following materials have been shipped:
> 1 x EmETX-i602 EXT Embedded Intel Celeron(or PIII Tulatin) SBC
> 1 x Quick Installation Guide
> 1 x CD-ROM ( for driver used)
> 1 x Warranty Card
Ordering Codes
EmETX-i6023/C400Intel Celeron ULV 400MHz board with VGA/LCD,
TV-out, audio, dual Ethernet, CF socket, PC/104
and PC/104 Plus interface

Board Dimension

ETX Connector
100
97
99
88
90
92
94
98
96
80
82
84
86
81
87
89
91
93
95
85
83
79
62
64
66
68
70
72
74
76
78
57
59
61
63
65
67
69
71
73
75
77
34
36
38
4039
41
43
45
47
42
44
46
48
50
58
60
52
54
56
49
51
53
55
33
35
37
16
13
15
17
19
21
23
25
27
29
18
20
22
24
26
28
30
3231
14
1
3
5
7
9
11
2
4
6
8
10
12
PCICLK2
3V
GNT#3
GND
PCICLK4
GND
AD9
AD7
AD5
AD3
AD2
3V
REQ#0
VCC
RESERVED
3V
GNT#1
PAR
VCC
CBE#1
AD15
AD14
AD13
ASGND
SNDL
ASVCC
AUXAR
MIC
AD12
AD11
AD10
GND AUXAL GND
USB3-TRDY#
LOCK#
PME# USB2-
DEVSEL#
RESERVEDGPERR# SERR#
VCC
SNDR
AD19
AD17
AD16
GND
FRAME#
IRDY#
CBE#2
AD18
USB3+
GND
USB2+
STOP#
INTD#
AD31
USB1+
AD29
USB0+
AD26
VCC
CBE#3
USB1-
AD21
USB0-
GND
INTB#
AD24
AD25
VCC
AD23
AD22
AD20
GND
INTA#
INTC#
PCIRST#
AD30
AD27
AD28
REQ#1
REQ#2
GNT#2
REQ#3
PCICLK1
GND
PCICLK3
GND
AD6
AD4
AD1
AD0
SERIRQ
VCC
GNT#0
AD8
CBE#0
ETX1
PAR
VCC
CBE#1
AD15
AD14
AD13
AD12
AD11
AD10
GND
TRDY#
LOCK#
PME#
PERR#
AD19
AD17
AD16
GND
FRAME#
IRDY#
AD24
AD25
VCC
AD23
AD22
AD20
GND
INTR#A
INTR#C
PCIRST#
AD30
AD27
AD26
REQ#1
REQ#2
GNT#2
REQ#3
PCICLK1
GND
PCICLK3
GND
AD6
AD4
AD1
AD0
SERIRQ
VCC
GNT#0
AD8
CBE#0
100
97
99
88
90
92
94
98
96
80
82
84
86
81
87
89
91
93
95
85
83
79
62
64
66
68
70
72
74
76
78
57
59
61
63
65
67
69
71
73
75
77
34
36
38
4039
41
43
45
47
42
44
46
48
50
58
60
52
54
56
49
51
53
55
33
35
37
16
13
15
17
19
21
23
25
27
29
18
20
22
24
26
28
30
3231
14
1
3
5
7
9
11
2
4
6
8
10
12
SA6
VCC
SA5
SA4
SA3
SA2
SA1
SA0
SBHE#
GND
SA10
SA9
SA8
SA7
SA15
SA14
SA13
GND
SA12
SA11
IOCHRDY
SD0
VCC
SA19
SA18
SA16
GND
IOCHK#
SD6
SD5
DREQ2
SD3
SD2
SD8
SD9
SD10
SD11
SD12
SD13
SD14
GND
LA21
LA20
LA19
LA18
LA17
MEMR#
MEMW#
LA23
LA22
DREQ7
DREQ6
DACK#7
MASTER#
SD15
GND
IO16#
IRQ10
IRQ11
IRQ12
IRQ15
IRQ14
DACK#0
DREQ0
DACK#5
DREQ5
DACK#6
IRQ3
DACK#2
TC
BALE
OSC
M16#
GND
REFSH#
IRQ7
SYSCLK
IRQ6
IRQ5
VCC
IRQ4
DREQ3
IOR#
DACK#3
GND
DACK#1
DREQ1
SD7
IRQ9
SD4
NOWS#
SD1
SMEMW#
VCC
AEN
SMEMR#
SA17
IOW#
GND
RSTDRV
ETX2

ETX Connector
100
97
99
88
90
92
94
98
96
80
82
84
86
81
87
89
91
93
95
85
83
79
62
64
66
68
70
72
74
76
78
57
59
61
63
65
67
69
71
73
75
77
34
36
38
4039
41
43
45
47
42
44
46
48
50
58
60
52
54
56
49
51
53
55
33
35
37
16
13
15
17
19
21
23
25
27
29
18
20
22
24
26
28
30
3231
14
1
3
5
7
9
11
2
4
6
8
10
12
`
VCC
N.C
SYNC
COMP
BIASON
N.C
N.C
VCC
TX1D0+
TX1D0#
IRTX
IRRX
N.C
STB#
DSR#2
DCD#2
DTR#2
RTS#2
GND
RXD2
VCC
RTS#1
RXD1
RI2#
TXD#2
CTS#2
GND
RI1#
TXD#1
CTS#1
DSR#1
DCD#1
DTR#1
GND
TX2CLK+
TX2CLK#
DETECT#/N.C
VSY
HSY
R
GND
TX1D2#
GND
TX1D3+
TX1D3#
GND
TX2D1#
TX2D1+
GND
TX1D2+
DDCK
TX2D3#
DDDA
G
B
GND
GND
TX1CLK#
TX1CLK+
GND
TX2D0#
TX2D0+
GND
TX2D2#
TX2D2+
GND
TX2D3+
Y
DIGON
BLON#
N.C
VCC
TX1D1#
TX1D1+
PD6
PD7
ERR#
AFD#
GND
N.C
C
SLIN#
PD3
PD4
PD5
GND
INIT#
KBCLK
MSDAT
MSCLK
SLCT#
PE
BUSY#
ACK#
VCC
PD0
PD1
PD2
GND
KBDAT
ETX3
100
97
99
88
90
92
94
98
96
80
82
84
86
81
87
89
91
93
95
85
83
79
62
64
66
68
70
72
74
76
78
57
59
61
63
65
67
69
71
73
75
77
34
36
38
4039
41
43
45
47
42
44
46
48
50
58
60
52
54
56
49
51
53
55
33
35
37
16
13
15
17
19
21
23
25
27
29
18
20
22
24
26
28
30
3231
14
1
3
5
7
9
11
2
4
6
8
10
12
SIDE_DRQ
SIDE_IOW#
VCC
SIDE_IOR#
SIDE_RDY
SIDE_AK#
SD33/66SEL
SIDE_INTRQ
SIDE_A1
PD33/66SEL
SIDE_D1
SIDE_D14
SIDE_D0
SIDE_D15
SIDE_D11
SIDE_D3
SIDE_12
SIDE_D2
GND
SIDE_D13
VCC
SIDE_D6
SIDE_D9
SIDE_D5
SIDE_D10
SIDE_D4
GND
TXD
TXD#
RXD
RXD#
RING IN
SIDE_D8
N.C
ROMKBCS#
WDTOUT
N.C
PWRBTN#
PS_ON
5V_SB
GND
SIDE_A2
SIDE_CS1#
SIDE_CS3#
SMBCLK
EXTSMI#
OVCR#
VCC
GND
SIDE_A0
BATT
ACTLED
LILED
SPEAKER
PWGIN
GND
GND
PIDE_CS1#
PIDE_CS3#
DASP#
CPU_FAN
SMBDAT
12DAT
GPCS#
VCC
12CLK
SPEEDLED
PIDE_RDY
PIDE_AK#
PIDE_INTRQ
N.C
PIDE_A1
PIDE_A0
PIDE_A2
PIDE_D14
PIDE_D15
PIDE_D0
PIDE_DRQ
PIDE_IOW#
PIDE_IOR#
VCC
PIDE_D2
PIDE_D3
PIDE_D12
PIDE_D13
GND
PIDE_D1
PIDE_D7
SIDE_D7
PIDE_D8
WOL
PIDE_D6
PIDE_D9
PIDE_D5
VCC
PIDE_D10
PIDE_D4
PIDE_D11
GND
HDRST#
ETX4

Jumper/Connector in Top Side
Connectors
Lable Function Page
LCD1 LCD TTL Connector 1 9
LCD2 LCD TTL Connector 2 9
ETX1 PCI Bus, USB, Audio 10
ETX2 ISA Bus 10
ETX3 VGA,LCD,Video,COM1,COM2,LPT,IrDA,M/K 11
ETX4 IDE1,IDE2,Ethernet,Miscellaneous 11

Flat Panel VGA
LCD1
Type : Onboard 40-pin Box Header (Hirose DF-40DS-1.25C)
Pin Description Pin Description
1 VCC5V 2 VCC5V
3 GND 4 GND
5 VCC3V 6 VCC3V
7 NC 8 GND
9 FPD0 10 FPD1
11 FPD2 12 FPD3
13 FPD4 14 FPD5
15 FPD6 16 FPD7
17 FPD8 18 FPD9
19 FPD10 20 FPD11
21 FPD12 22 FPD13
23 FPD14 24 FPD15
25 FPD16 26 FPD17
27 FPD18 28 FPD19
29 FPD20 30 FPD21
31 FPD22 32 FPD23
33 GND 34 GND
35 SHFCLK 36 HSYNC
37 M(DE) 38 VSYNC
39 ENABLK 40 ENAVEE
LCD2
Type : Onboard 20-pin Box Header (Hirose DF-20DS-1.25C)
Pin Description Pin Description
1 GND 2 GND
3 FPD24 4 FPD25
5 FPD26 6 FPD27
7 FPD28 8 FPD29
9 FPD30 10 FPD31
11 FPD32 12 FPD33
13 FPD34 14 FPD35
15 GND 16 GND
17 NC 18 NC
19 NC 20 NC

Label Function
INV1 LCD Inverter connector
LVDS1 LVDS Connector (30 pin)
TV1 TV-Out
PWR1 Power terminator/6P Power Connector
IDE1 Primary IDE Connector
CFD1 Compact Flash socket (shared with 2nd IDE Master)
VGA1 VGA Display Connector
IR1 Infrared (IR) Connector
USB1 USB 0/1 Connector
USB2 USB 2/3 Connector
COMA COM1 / COM2
COMB COM3 / COM4
LPT1 Parallel Port
LAN1 10/100 Base-T Ethernet Connector from ETX core module
LAN2 10/100 Base-T Ethernet Connector from carrier board
LANLED1 LAN LINK / ACTIVE LED status
LANLED2 LAN LINK / ACTIVE LED status
AUDIO1 Audio Connector
FDD1 Floppy Disk Drive Connector
KBM1 PS/2 Keyboard & Mouse
FAN1 +5V DC power source for FAN
JFRT1 Switches & Indicators
DIO1 Digital Input/Output
PC104 PC104 ISA Connector
PC104+ PC104+ PCI Connector
JCOM1 RS-422/485 Connector
Jumper/Connector in Back Side

CMOS Jumper Settings
CMOS Setup (JBAT1)
Type : JBAT1: onboard 3-pin header
CMOS Setup (JBAT1) JBAT1
Keep CMOS 1-2 ON
Clear CMOS 2-3 ON
default setting : Keep CMOS
1
2
3
JBAT1
RS-232C/422/485 Mode on COM2 (JRS2)
The onboard COM2 port can be configured to operate in RS-232C mode or in
different RS-422/485 modes.
Mode Selection 1-2 3-4 5-6
RS-232C ON OFF OFF
RS-422 OFF ON OFF
RS-485 OFF OFF ON
Default setting RS-232
Serial Port Selection (RS232C/422/485)
5 3 1
JRS2
6 4 2
Connector : JCOM1
Type : Onboard 4-pin boxheader
Pin Description Pin Description
1 RS485 RTX+/RS422 TX+ 2 RS485 RTX-/RS422 TX-
3 RS422 RX+ 4 RS422 RX-
RS422/485 Connector
JCOM1

Watchdog Timer
Watchdog Output (JWT)
Mode Setting
Watchdog Mode JWT
Enabled for Active NMI(I/O Channel Check) 1-2
Enabled for System Reset 2-3
Disable Watchdog Timer None
default setting Enabled
1
2
3
JWT
LVDS Voltage Seletion
LVDS Operation (JVLCD1)
Type : onboard 3-pin dip switch
LVDS VOLTAGE SELECT JVLCD1
5V 1-2
3.3V 2-3
default setting 3.3V
3 2 1
JVLCD1

Connector : INV1
Type : Onboard 5-pin mini boxheader
Pin Description Pin Description
1 +12 V 2 GND
3 BLON 4 NA
5 GND
LCD Inverter Connector
12345
LVDS LCD Connector
Connector : LVDS1
Type : onboard DF-13-30P-1.25V
1 VDD 2 VDD
3 TX1CLK+ 4 TX2CLK+
5 TX1CLK- 6 TX2CLK-
7 GND 8 GND
9 TX1D0+ 10 TX2D0+
11 TX1D0- 12 TX2D0-
13 GND 14 GND
15 TX1D1+ 16 TX2D1+
17 TX1D1- 18 TX2D1-
19 GND 20 GND
21 TX1D2+ 22 TX2D2+
23 TX1D2- 24 TX2D2-
25 GND 26 GND
27 TX1D3+ 28 TX2D3+
29 TX1D3- 30 TX2D3-
VDD could be selected by JVLCD1 +5V or +3.3V
LVDS1

Connector : TV1 (Function not available in Em104P-i7013)
Type: Onboard 6-pin mini boxheader
PIN Description
1 TV_COMP
2 GND
3 TV_Y
4 GND
5 TV_C
6 GND
TV-out Connector
16
Connector : PWR1
Type : onboard 6-pin Terminator
Pin Description
1 +12V
2 GND
3 GND
4 GND
5 +5V
6 +5V
Power Connector
PWR1
+5 V
GND
GND
+12 V
GND
+5 V

Enhanced IDE Connector
Connector : IDE1
Type : One onboard 44-pin box headers, primary IDE
Pin Description Pin Description
1 #RESET 2 GND
3D7 4D8
5D6 6D9
7 D5 8 D10
9 D4 10 D11
11 D3 12 D12
13 D2 14 D13
15 D1 16 D14
17 D0 18 D15
19 GND 20 NC
21 REQ 22 GND
23 #IOW 24 GND
25 #IOR 26 GND
27 #IORDY 28 IDESEL
29 #DACK 30 GND
31 IRQ 32 NC (-IOCS16)
33 ADDR1 34 CBLID
35 ADDR0 36 ADDR2
37 #CS1 38 #CS3(#HD SELECT1)
39 #ACT 40 GND
41 Vcc 42 Vcc
43 GND 44 NC
1
2

Compact Flash Connector
Connector : CFD1
Type : 50-pin compact flash type I/II (Share 2nd IDE Master)
Pin Description Pin Description Pin Description
1 GND 18 ADDR2 35 IO WRITE
2 DATA3 19 ADDR1 36 +5V
3 DATA4 20 ADDR0 37 IRQ15
4 DATA5 21 DATA0 38 +5V
5 DATA6 22 DATA1 39 CSEL
6 DATA7 23 DATA2 40 N/C
7 CS#1 24 N/C (-IOCS16) 41 IDE RESET
8 GND 25 GND 42 IO READY
9 GND 26 GND 43 N/C
10 GND 27 DATA11 44 +5V
11 GND 28 DATA12 45 DASP
12 GND 29 DATA13 46 DIAG
13 +5V 30 DATA14 47 DATA8
14 GND 31 DATA15 48 DATA9
15 GND 32 CS#3 49 DATA10
16 GND 33 GND 50 GND
17 GND 34 IO READ
Note: CFD1 does not support hot swap

VGA Connector
Connector : VGA1
Type: Onboard 16-pin mini boxheader
Pin Description Pin Description Pin Description
1 RED 6 GND 11 NC
2 GREEN 7 GND 12 VDDAT
3 BLUE 8 GND 13 HSYNC
4 NC 9 NC 14 VSYNC
5 GND 10 GND 15 VDCLK
16 NC
VGA1
1
2
IrDA Connector
Pin Signal Pin Signal
1 +5V 2 NC
3 IRRX 4 GND
5 IRTX
Connector : IR1
Type : Onboard 5-pin header
Keyboard & PS/2 Mouse
Connector : KBMS
Type : onboard wafer 1x6-pin
Pin Description Pin Description
1 KB_DATA 2 GND
3 MS_DATA 4 KB_CLK
5 +5V 6 MS_CLK
IR1
KBMS
654321
54321