Arbor Technology EmCORE-i2501 User manual

- 1 -
4041250100100PCopyright®2012 All Rights Reserved.
Quick Installation Guide
Version 1.0
If you have any technical difculties, please consult the user’s manual rst at:
ftp://ftp.arbor.com.tw/pub/manual
Please do not hesitate to call or e-mail our customer service when you still can not
nd out the answer.
http://www.arbor.com.tw
E-mail: [e-mail]
♦ Technical Support
EmCORE-i2501
3.5" Compact Board
I/O
CFast or NANDrive/
SATA/ USB/ Mini-card/
COM
Video
Single Channel 18/24-bit
LVDS/ DVI -I
LAN
2 x Intel
®
82583V PCIe
Gigabit Ethernet
Audio
Realtek ALC662 HD Audio
CODEC, Line-in/ Line-out/
Mic-in
Form Factor
3.5"Compact Board
CPU
Intel®Atom™ N2600 or
D2550 Processor
Chipset
Intel®PCH NM10
FCC Class A
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions : (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.

- 2 -
Ordering Information
Packing List
EmCORE-i2501-N26 Intel Atom™ N2600 3.5” Compact Board with CFast
socket
EmCORE-i2501D-N26
(BTO)
Intel Atom™ N2600 3.5” Compact Board with 8GB
NANDrive
EmCORE-i2501-D25 Intel Atom™ D2550 3.5” Compact Board with CFast
socket
EmCORE-i2501D-D25
(BTO)
Intel Atom™ D2550 3.5” Compact Board with 8GB
NANDrive
CBK-06-2501-00
Cable Kit
1 x COM port cables
1 x Audio cable
2 x USB cables
1 x SATA cable
1 x SATA power cable
Before you begin installing your Compact Board, please make sure that the following
materials have been shipped:
1 x EmCORE-i2501 3.5" Compact Board with heatsink
1 x Power cable
1 x Driver CD
1 x Quick Installation Guide
If any of the above items is damaged or missing, contact your vendor immediately.
The Installation Paths of CD Driver
Windows 7
Driver Path
CHIPSET \EmETXe-i250x\CHIPSET\WIN7
VGA \EmETXe-i250x\GRAPHICS
AUDIO \EmETXe-i250x\AUDIO
LAN \EmETXe-i250x\ETHERNET

- 3 -
Board Dimensions
7
1
1
2
9
10
1
2
9
10
1 3
2
1
4
3
2
1
1
2
3
4
2
1
1 2
9
1
13
2
9
10
1
2
9
10
1
11
1
1
1
2
7
8
1
2
9
10
1
2
9
10
4
1
2
9
10
1
2
9
10
9876 54321
1
5
4
8
15 11
97
65
4 2
24
16
8
17
9
1
C6
C4
C3
C2
C1
C5
2
3029
1
2
1
72
74
71
73
7021.3
52
3.35
20.99 18.5
56.95
87.21
124
33.51 64.00
145.95
101.96
52
8.62
DVI Type
VGA Type
3.17
98.37
8.84
142.77
Heat sink area
Ø3.1
Ø6.4
(23)
Heat sink area
Unit: mm

- 4 -
Form Factor 3.5" Compact Board
CPU Soldered onboard Intel® Atom™ N2600 at 1.6GHz or
D2550 at 1.86GHz processor
Chipset Intel® PCH NM10
System Memory 1 x 204-pin DDR3 SO-DIMM socket supporting 1066MHz
SDRAM up to 4GB (D2550)/ 2GB (N2600)
Graphics Chipset Integrated Intel® Graphics Media Accelerator 3650/ 3600
Graphics Interface
DVI-I: Analog RBG support up to 1920 x 1200 @60Hz
DVI support up to 1920 x 1200 @60Hz
Single Channel 18/24-bit LVDS
Support dual independent display
Ethernet 2 x Intel 82583V PCIe Gigabit Ethernet Controllers
I/O Chips Fintek F81866D
BIOS AMI® UEFI BIOS
Audio Realtek ALC662 5.1 Channel HD Audio CODEC, Mic-in/ Line-in/
Line-out
Storage
1 x Serial ATA port with 300MB/s HDD transfer rate
1 x CFast socket or soldered onboard 8GB NANDriver
(Alternative)
Serial Port 2 x COM ports (1 x RS-232 port, 1 x RS-232/422/485 port
selectable)
Universal Serial Bus 6 x USB 2.0 ports
Digital IO 8-bit programmable Digital Input/ Output
Expansion Bus 1 x Mini-card socket (half size)
Power Requirement +12V DC single input, additional +5VSB also supported for
use of ATX power
Operation Temp. -20°C ~ 70°C (-4°F ~ 158°F)
Operating Humidity 0 ~ 90% (non-condensing)
Watchdog Timer 1~255 levels reset
Dimension (L x W) 146 x 102 mm (5.7” x 4.0”)
Specications

- 5 -
Jumpers & Connectors Quick Reference
Jumpers
Label Function
JAT1 AT/ATX Power Mode Selector
JBAT1 Clear CMOS Setting
JCV1 COM Port Power Selector
JRS1 COM2 RS-232/422/485 Selector
JVLCD1 LCD Panel Voltage Selector
JV1/2 Volgate/RI Selector for COM1/2
Connectors
Label Function
12VIN1 ATX+12V Connector
AUDIO1 Audio Connector
CFAST1 CFast Socket
COM1/2 Serial Port Connectors
DIO1 Digital I/O Connector
DVI1 DVI-I Connector
EATX1 ATX Feature Connector
FAN1 CPU Fan Power Connector
JFRT1 Switches and Indicators
INV1 LCD Inverter Connector
JCOM1 COM2 RS-422/485 Output Connector
LAN1/2 Gigabit Ethernet Connectors
LVDS1 LVDS LCD Connector
MC1 Mini-card Socket
PWROUT1 SATA Power Connector
SATA1 Serial ATA Connector
USB1/2 USB Connectors
USB3 Double Stacks USB type A Connector

- 6 -
Jumpers Location
1
7
5
6
7 1
1 3
2
1 4
3
2
1
1
2
9
1
13
2
9
10
1
2
9
10
11
1
1
1
2
7 8
1 2
9
10
1 2
9
10
4
1
2
9
10
1
2
9
10
2
3029
1
2
1
72
74
71
73
JV2
LED3
JRS1
JVLCD1
JBAT1
2JAT1
3JCV1
4JV1
1
1

- 7 -
Connectors Location
CFAST1
(bottom
side)
14
10
15
11
16
12
17
13
18
19
23
20
24
21
25
22
26
27
28
89
3
2
1
1
9
10
2
3029
1
2
1
72
74
71
73
AUDIO1
PWROUT1
INV1 LVDS1
12VIN1
EATX1
FAN1 MC1
SATA1
USB2
JCOM1
COM2
USB1
DIO1
JFRT1
LED3
LAN1
LAN2
USB3
DVI1
COM1
31
3
2
4
1
1
9
9
7 8
1
1
1
2
11
1
1
1
2
1
4
1
2
1
1

- 8 -
Jumpers
JBAT1: Clear CMOS Setting (1)
Connector type: 2.54mm pitch 1x3-pin header
Pin Mode
1-2 Keep CMOS (default)
23 1
2-3 Clear CMOS
23 1
JCV1: COM Port Power Selector (3)
Connector type: 2.54mm pitch 1x3-pin header
Pin Mode
1-2 +5V (default)
23 1
2-3 +12V
23 1
JV1/2: Voltage/RI Selector for COM1/2 (4, 5)
Connector type: 2.00mm pitch 1x3-pin header
Pin Mode
1-2 RI
23 1
2-3 +12V/ +5V (depend on JCV1)
23 1
JVLCD1: LCD Panel Voltage Selector (7)
Connector type: 2.00mm pitch 1x3-pin header
Pin Mode
1-2 5V
23 1
2-3 3.3V (default)
23 1
JAT1: AT/ATX Power Mode Selector (2)
Connector type: 2.00mm pitch 1x2-pin header
Pin Mode
Short AT Mode 1 2
Open ATX Mode (default) 1 2
JRS1: COM2 RS-232/422/485 Selector (6)
Connector type: 2.00mm pitch 2x4-pin header
Mode RS-232 (default) RS-422 RS-485
1-2 Short Open Open
3-4 Open Short Open
5-6 Open Open Short
7-8 Short Short Open
87
21
87
21
87
21
Connectors
INV1: LCD Inverter Connector (8)
Connector type: 2.00mm pitch 1x5-pin box wafer connector
Pin Description
1
5
1 +12V
2GND
3 on/off
4Brightness control
5GND
LVDS1: LVDS LCD Panel Connector (9)
The LVDS connector supports single channel 18-bit
or 24-bit LVDS.
VDD could be selected by JVLCD1 in +5V or +3.3V.
Connector type: DF-13-30DP-1.25V
Pin Description Pin Description
1
2930
2
2VDD 1VDD
4 NC 3 LVDS CLK+
6NC 5 LVDS CLK-
8 GND 7 GND
10 NC 9 LVDS TX0+
12 NC 11 LVDS TX0-
14 GND 13 GND
16 NC 15 LVDS TX1+
18 NC 17 LVDS TX1-
20 GND 19 GND
22 NC 21 LVDS TX2+
24 NC 23 LVDS TX2-
26 GND 25 GND
28 NC 27 LVDS TX3+
30 NC 29 LVDS TX3-
SATA1: Serial ATA Connector (10)
High speed transfer rates (300MB/s).
Pin Description
1
7
1GND
2TX+
3 TX-
4GND
5RX-
6 RX+
7 GND
JRS1: COM2 RS-485 Auto-Flow Selection (6)
Connector type: 2.00mm pitch 2x4-pin headers.
Mode Disable Enable
7-8 Short Open
87
21
87
21

- 9 -
DIO1: Digital I/O Connector (17)
Connector type: 2.00mm pitch 2x5-pin header
Pin Description Pin Description
109
1 2
1DIO1 2DIO2
3 DIO3 4DIO4
5DIO5 6 DIO6
7 DIO7 8 DIO8
9+5V 10 GND
JFRT1: Switches and Indicators (18)
Connector type: 2.00mm pitch 2x5-pin header
Pin Description Pin Description
109
1 2
1RESET+ 2RESET-
3 POWER_LED+ 4POWER_LED-
5HDD_LED+ 6 HDD_LED-
7 SPEAKER+ 8 SPEAKER-
9 PWRBTN+ 10 PWRBTN-
COM2: Serial Port Connector (13)
Connector type: 2.00mm pitch 2x5-pin box header
Pin Description Pin Description
1 2
9 10
1DCD#2 2RXD2
3 TXD2 4DTR#2
5GND 6 DSR#2
7 RTS#2 8 CTS#2
9RI2 10 NC
AUDIO1: Audio Connector (12)
Connector type: 2.00mm pitch 2x5-pin box header
Pin Description Pin Description
1 2
9 10
1Lin_In_Left 2Line_In_Right
3 GND 4GND
5MICL 6 MICR
7 GND 8 GND
9Speaker Left 10 Speaker Right
JCOM1: COM2 RS-422/485 Output Connector
(14)
Connector type: 2.00mm pitch 1x4-pin box wafer connector
Pin RS-422 RS-485
1
1TX+ DATA+
2TX- DATA-
3 RX+ N/C
4RX- N/C
12VIN1: ATX+12V Connector (19)
Pin Description Pin Description
24
13
2GND 4 +12V
1GND 3 +12V
EATX1: ATX Feature Connector (20)
Connector type: 2.54mm pitch 1x3-pin box wafer connector
Pin Description
1
2
3
1PS-ON
2GND
3 5V_SB
USB1/2: USB Connectors (16, 15)
Connector type: 2.00mm pitch 2x5-pin header
Pin Description Pin Description
109
1 2
1 +5V 2 +5V
3 USBD- 4USBD-
5USBD+ 6 USBD+
7 GND 8 GND
9 GND 10 N/C(KEY)
PWROUT1: SATA Power Connector (11)
Connector type: 1x4-pin 2.54mm power connector
Pin Description
1
1 5V
2GND
3 GND
4 12V

- 10 -
COM1: Serial Port Connector (27)
Connector type: external 9-pin D-sub male connector
1 5
96
USB3: Double Stacks USB type A Connector
(25)
LAN1/2: Gigabit Ethernet Connectors (23, 24)
These connectors support Gigabit Ethernet.
CFast1: CFast Socket (28) (On Bottom Side)
Pin Description
PC1
S7
S1
PC17
PC1
S7
S1
PC17
S1 SGND1
S2 TXP
S3 TXN
S4 SGND2
S5 RXN
S6 RXP
S7 SGND
PC1 CDI
PC2 GND
PC3 TBD
PC4 TBD
PC5 TBD
PC6 TBD
PC7 GND
PC8 LED1
PC9 LED2
PC10 IO1
PC11 IO2
PC12 IO3
PC13 3.3V
PC14 3.3V
PC15 GND
PC16 GND
PC17 CD0
DVI1: DVI-I Display Connector (26)
Pin Description Pin Description Pin Description
1 DATA2- 9 DATA1- 17 DATA0-
2 DATA2+ 10 DATA1+ 18 DATA0+
3 DATA 2/4 SHIELD 11 DATA 1/3 SHIELD 19 DATA 0/5 SHIELD
4 DATA 4- (LINK 1, NC) 12 D ATA 3- (LINK 1, NC) 20 DATA 5- (LINK 1, NC)
5 DATA 4+ (LINK 1, NC) 13 DATA 3+ (LINK 1, NC) 21 DATA 5+ (LINK 1, NC)
6 DDC_CLK 14 +5V 22 Clock_SHIELD
7 DDC_DATA 15 GND (for +5V) 23 Clock+
8 VGA_V_Sync 16 Hot Plug Detect 24 Clock-
C1 VGA Red
C2 VGA Green
C3 VGA Blue
C4 VGA_H_Sync
C5 VGA_R,G,B_Return
Note:
Deafult signals are setting to DVI-D.
1 8
9 16
17
C1
C3
C2
C4
24
FAN1: CPU Fan Power Connector (22)
Connector type: 2.54mm pitch 1x3-pin box wafer connector
Pin Description
1
2
3
1GND
2 +12V
3Fan Speed
MC1: Mini-card Socket (21)