Arbor Technology EmETXe-i88U4-D1539 User manual

EmETXe-i88U4
COM Express®Compact
Type 6 CPU Module
User’s Manual
Version 1.0
2020.07

Revision History
Version Date Description
1.0 2020.07 Initial release

- i -
Preface iii
Copyright Notice................................................................iii
Declaration of Conformity ................................................iii
CE..........................................................................................iii
FCC Class B.........................................................................iii
RoHS.....................................................................................iv
SVHC / REACH.....................................................................iv
Warning ...............................................................................v
Replacing the Lithium Battery...........................................v
Technical Support ..............................................................v
Warranty .............................................................................vi
Chapter 1 - Introduction 1
1.1 The Product..................................................................2
1.2 About This Manual.......................................................2
1.3 Specications ...............................................................3
1.4 Inside the Package ......................................................4
1.5 Ordering Information...................................................4
1.5.1 Optional Accessories.................................................4
Chapter 2 - Board Overview 7
2.1 What Is “COM Express®”? ..........................................8
2.2 Board Dimensions.......................................................9
2.3 Block Diagram ...........................................................10
2.4 Connector Pin Denition ..........................................11
Chapter 3 - Installation & Maintenance 15
3.1 Installing the CPU Module to Carrier Board............16
Chapter 4 - BIOS 19
4.1 Main ............................................................................20
4.2 Advanced....................................................................22
4.2.1 Trusted Computing...................................................23
4.2.2 IT8528 Super IO Conguration................................24
4.2.3 Hardware Monitor.....................................................25
4.2.4 S5 RTC Conguration ..............................................26
Contents

- ii -
4.2.5 CSM Conguration...................................................27
4.2.6 USB Conguration ...................................................29
4.3 IntelRCSetup ..............................................................31
4.3.1 Processor Conguration .........................................32
4.3.2 Advanced Power Management Conguration .......33
4.3.3 QPI Conguration.....................................................36
4.3.4 Memory Conguration .............................................40
4.3.5 PCH Conguration ...................................................41
4.4 Security ......................................................................46
4.5 Boot ............................................................................47
4.6 Save & Exit .................................................................48
Appendix 49
Appendix A: Watchdog Timer (WDT) Setting................50
Appendix B: DIO Sample Code ......................................52
Content

- iii -
Copyright Notice
All Rights Reserved.
The information in this document is subject to change without prior notice in
order to improve the reliability, design and function. It does not represent a
commitment on the part of the manufacturer.
Under no circumstances will the manufacturer be liable for any direct, indirect,
special, incidental, or consequential damages arising from the use or inability
to use the product or documentation, even if advised of the possibility of such
damages.
This document contains proprietary information protected by copyright.
All rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic, or other means in any form without prior written
permission of the manufacturer.
Declaration of Conformity
CE
The CE symbol on your product indicates that it is in compliance with the
directives of the Union European (EU). A Certicate of Compliance is available
by contacting Technical Support.
This product has passed the CE test for environmental specications when
shielded cables are used for external wiring. We recommend the use of
shielded cables. This kind of cable is available from ARBOR. Please contact
your local supplier for ordering information.
This product has passed the CE test for environmental specications. Test
conditions for passing included the equipment being operated within an
industrial enclosure. In order to protect the product from being damaged by
ESD (Electrostatic Discharge) and EMI leakage, we strongly recommend the
use of CE-compliant industrial enclosure products.
Warning
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
FCC Class B
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
Preface

- iv -
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference
that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
RoHS
ARBOR Technology Corp. certies that all components in its products are in
compliance and conform to the European Union’s Restriction of Use of Haz-
ardous Substances in Electrical and Electronic Equipment (RoHS) Directive
2002/95/EC.
The above mentioned directive was published on 2/13/2003. The main pur-
pose of the directive is to prohibit the use of lead, mercury, cadmium, hexava-
lent chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl
ethers (PBDE) in electrical and electronic products. Member states of the EU
are to enforce by 7/1/2006.
ARBOR Technology Corp. hereby states that the listed products do not contain
unintentional additions of lead, mercury, hex chrome, PBB or PBDB that ex-
ceed a maximum concentration value of 0.1% by weight or for cadmium exceed
0.01% by weight, per homogenous material. Homogenous material is dened
as a substance or mixture of substances with uniform composition (such as sol-
ders, resins, plating, etc.). Lead-free solder is used for all terminations (Sn(96-
96.5%), Ag(3.0-3.5%) and Cu(0.5%)).
SVHC / REACH
To minimize the environmental impact and take more responsibility to the
earth we live, Arbor hereby conrms all products comply with the restriction
of SVHC (Substances of Very High Concern) in (EC) 1907/2006 (REACH
--Registration, Evaluation, Authorization, and Restriction of Chemicals)
regulated by the European Union.
All substances listed in SVHC < 0.1 % by weight (1000 ppm)
Preface

- v -
Warning
Single Board Computers and their components contain very delicate
Integrated Circuits (IC). To protect the Single Board Computer and its
components against damage from static electricity, you should always follow
the following precautions when handling it :
1. Disconnect your Single Board Computer from the power source when you
want to work on the inside.
2. Hold the board by the edges and try not to touch the IC chips, leads or cir-
cuitry.
3. Use a grounded wrist strap when handling computer components.
4. Place components on a grounded antistatic pad or on the bag that comes
with the Single Board Computer, whenever components are separated from
the system.
Replacing the Lithium Battery
Incorrect replacement of the lithium battery may lead to a risk of explosion.
The lithium battery must be replaced with an identical battery or a battery type
recommended by the manufacturer.
Do not throw lithium batteries into the trash-can. It must be disposed of in
accordance with local regulations concerning special waste.
Technical Support
If you have any technical di󰀩culties, please consult the user’s manual rst at:
http://www.arbor-technology.com
Please do not hesitate to call or e-mail our customer service when you still can-
not nd out the answer.
http://www.arbor-technology.com
E-mail:[e-mail]
Preface

- vi -
Warranty
This product is warranted to be in good working order for a period of two years
from the date of purchase. Should this product fail to be in good working order
at any time during this period, we will, at our option, replace or repair it at no
additional charge except as set forth in the following terms. This warranty does
not apply to products damaged by misuse, modications, accident or disaster.
Vendor assumes no liability for any damages, lost prots, lost savings or any
other incidental or consequential damage resulting from the use, misuse of,
or inability to use this product. Vendor will not be liable for any claim made by
any other related party.
Vendors disclaim all other warranties, either expressed or implied, including
but not limited to implied warranties of merchantability and tness for a
particular purpose, with respect to the hardware, the accompanying product’s
manual(s) and written materials, and any accompanying hardware. This limited
warranty gives you specic legal rights.
Return authorization must be obtained from the vendor before returned
merchandise will be accepted. Authorization can be obtained by calling or
faxing the vendor and requesting a Return Merchandise Authorization (RMA)
number. Returned goods should always be accompanied by a clear problem
description.
Preface

- 1 -
Introduction
1Chapter 1
Introduction

- 2 -
Introduction
1.2 About This Manual
This user’s manual provides general information and installation instructions
about the product. This user’s manual is intended for experienced users and
integrators with hardware knowledge of personal computers. If you are not
sure about any description in this booklet. Please consult your vendor before
further handling.
1.1 The Product
The EmETXe-i88U4 is a space-conscious CPU board of 95 mm x 95 mm
to take up only small footprint in your system. By the architecture of Type
6, the board has two high-performance connectors to promise stable data
passing rate.
For system conguration, the board is supported by AMI UEFI BIOS.
EmETXe-i88U4 is an ideal choice for some demanding industrial control
and data communications by its signicant processing performance, low
power consumption and these features:
• Soldered onboard Intel® Xeon D-1539/D1508/D-1527 processor
• Supports two ECC SO-DIMM Sockets
• PCIex16 for Graphics
• Supports one Ethernet
• Operating Temp.: 0 ~ 60°C

- 3 -
Introduction
1.3 Specications
System
CPU Soldered onboard Intel®Xeon D-1539 1.6GHz/D-1508
2.2GHz/D-1527 2.2GHzprocessor
Memory 2 x DDR4 ECC SO-DIMM sockets
BIOS AMI UEFI BIOS
Watchdog Timer 1~255 levels reset
I/O
USB 2.0 8 x USB 2.0 ports
USB 3.0 4 x USB 3.0 ports
Expansion Bus 1 x PCIex16 lane, 8 x PCIex1 lanes, I2C Interface
Digital I/O 8-bit Digital Input/Output
Storage 4 x Serial ATA ports with 600MB/s HDD transfer rate
Ethernet Chipset 1 x Intel®i210IT PCIe controller
TPM Function Supports TPM (OEM request)
Mechanical & Environmental
Power Requirement +12V, 5VSB
Power Consumption 2.38A@12V (D1539 typical)
Operating Temp. 0 ~ 60°C (52 ~ 140°F)
Operating Humidity 10 ~ 95% @ 60ºC (non-condensing)
Dimension (L x W) 95 x 95 mm (3.7” x 3.7”)

- 4 -
Introduction
1.4 Inside the Package
Before you begin installing your single board, please make sure that the
following materials have been shipped:
1 x EmETXe-i88U4 COM Express CPU Module
1 x Quick Installation Guide
If any of the above items is damaged or missing, contact your vendor
immediately.
1.5 Ordering Information
EmETXe-i88U4-D1539 Intel®Xeon D1539 COM Express®Compact Type 6 CPU module
EmETXe-i88U4-D1508 Intel®Xeon D1508 COM Express®Compact Type 6 CPU module
EmETXe-i88U4-D1527 Intel®Xeon D1527 COM Express®Compact Type 6 CPU module
1.5.1 Optional Accessories
HS-88U4-C1 Heat sink with FAN 95x95x36.5mm
PBE-1705-F1 COM Express®Type 6 evaluation carrier board with SIO
F71869ED module in ATX form factor
CBK-03-1705-00
Cable kit
• 1 x SATA cable
• 2 x COM Flat cables

- 5 -
Introduction
Driver (7.0A) Installation
To install the drivers,please contact your Arbor Sales Representative to
get the permission to visit our website at www.arbor.technology.com and
download the driver pack from the product page.
Driver Path
SERVER \EmETXe-i88U4\SERVER INF
RST \EmETXe-i88U4\RST\GUI
Ethernet \EmETXe-i88U4\Ethernet

- 6 -
This page is intentionally left blank.

- 7 -
Board Overview
2Chapter 2
Board Overview

- 8 -
Board Overview
2.1 What Is “COM Express®”?
With more and more demands on small and embedded industrial boards, a
multi-functional COM (Computer-on-Module) surfaces as a great solution.
COM Express®supports seven pin-out types applying to Basic and Extended
form factors:
Module Type 1 and 10 support single connector with two rows (220 pins).
Module Type 2, 3, 4, 5 and 6 support two connectors with four rows (440 pins).
EmETXe-i88U4 is a Type-6 module.
Di󰀨erence between Standard Type 6 and EmETXe-i88U4 is listed as below:
Module Type Standard Type 6 EmETXe-i88U4
Connectors 2 2
Connector Rows A, B, C, D A, B, C, D
PCIe Lanes (Max) 24 24
LAN (Max) 1 1
Serial Ports (Max) 2 2
Digital Display I/F
(Max) 3 0
USB 3.0 Ports (Max) 4 4
Row AB provides pins for PCI Express, SATA, LPC bus, system and power
management, VGA, LAN, and power and ground interfaces.
Row CD provides PCI Express, LAN and power and ground signals. The
COM are targeted at following applications:
• Retail & Advertising
• Medical
• Test & Measurement
• Gaming & Entertainment
• Industrial & Automation
• Military & Government
• Security

- 9 -
Board Overview
2.2 Board Dimensions

- 10 -
Board Overview
2.3 Block Diagram
GbEPCIex1 Intel i210
PCIe controller
LPC I/F TPM 2.0
(OEM Request)
6 x PCIex1 (Lane0-3 configurable to x4)
LPC I/F
SMBus
8 x USB 2.0 Ports
4 x SATA 600Gb/s ports
SPI Bus
SPI Bus
SPI BIOS
2 x UART
8-bit GPIO
I2C
LPC I/F
ITE
IT8528VG
1 x PCIex16
2 x PCIex1
Connector AB
DDR4-2133MT/s
ECC
4 x USB 3.0
2 x SO-DIMM DDR4
sockets
Connector CD
Intel® Xeon
D-1539 (35W)/
D-1508 (25W)/
D-1527 (35W)
processor
(Broadwell)

- 11 -
Board Overview
2.4 Connector Pin Denition
Top Side
Bottom Side
Being a most commonly-used Type 6, the EmETXe-i88U4 features two board-
to-board connectors on bottom side.
DIMM1
2
DIMM2
2

- 12 -
Board Overview
COM Express AB Connector (bottom side)
B1 GND
B2 LAN_LED_LNK#_ACT
B3 LPC_FRAME#
B4 LPC_AD0
B5 LPC_AD1
B6 LPC_AD2
B7 LPC_AD3
B8 +V3.3S
B9 +V3.3S
B10 CLK_LPC_EXPRESS
B11 GND
B12 CB_PWRBTN#
B13 CB_SMB_CLK
B14 CB_SMB_DATA
B15 CB_SMB_ALERT#
B16 SATA_TXP1_C
B17 SATA_TXN1_C
B18 SUS_STAT#
B19 SATA_RXP1_C
B20 SATA_RXN1_C
B21 GND
B22 SATA_TXP3_C
B23 SATA_TXN3_C
B24 CB_PWROK
B25 SATA_RXP3_C
B26 SATA_RXN3_C
B27 WDT
B28 N/C
B29 N/C
B30 N/C
B31 GND
B32 SPKR
B33 I2C_CLK
B34 I2C_DAT
B35 THRM#
B36 USBDN5_DN
B37 USBDN5_DP
B38 USB_OC2_N
B39 USBDN3_DN
B40 USBDN3_DP
B41 GND
B42 USBDN1_DN
B43 USBDN1_DP
B44 USB_OC0_N
B45 USB_1N
B46 USB_1P
B47 PLTRST#_BUFF
B48 EXCD1_CCPE#
B49 CB_SYSRST#
B50 CB_RESET#
B51 GND
B52 PCIE_RXP6
B53 PCIE_RXN6
B54 DIO_5
B55 PCIE_RXP5
GND A1
LAN1_MDI3N A2
LAN1_MDI3P A3
LAN_LED_100# A4
LAN_LED_1000# A5
LAN1_MDI2N A6
LAN1_MDI2P A7
LAN_LED_LNK# A8
LAN1_MDI1N A9
LAN1_MDI1P A10
GND A11
LAN1_MDI0N A12
LAN1_MDI0P A13
N/C A14
SLP_S3# A15
SATA_TXP0_C A16
SATA_TXN0_C A17
SLP_S4# A18
SATA_RXP0_C A19
SATA_RXN0_C A20
GND A21
SATA_TXP2_C A22
SATA_TXN2_C A23
SLP_S5# A24
SATA_RXP2_C A25
SATA_RXN2_C A26
BATLOW# A27
SATALED# A28
N/C A29
N/C A30
GND A31
N/C A32
N/C A33
BIOS_DIS0# A34
THRMTRIP# A35
USBDN4_DN A36
USBDN4_DP A37
USB_OC3_N A38
USBDN2_DN A39
USBDN2_DP A40
GND A41
USB_2N A42
USB_2P A43
USB_OC1_N A44
USB_0N A45
USB_0P A46
VCC_RTC A47
PLTRST#_BUFF A48
EXCD0_CPPE# A49
SERIRQ A50
GND A51
PCIE_TXP6 A52
PCIE_TXN6 A53
DIO_0 A54
PCIE_TXP5 A55
B56 PCIE_RXN5
B57 DIO_6
B58 PCIE_RXP4
B59 PCIE_RXN4
B60 GND
B61 PCIE_RXP3
B62 PCIE_RXN3
B63 DIO_7
B64 PCIE_RXP2
B65 PCIE_RXN2
B66 PCH_WAKE#
B67 EC_WAKE_IN#
B68 PCIE_RXP1
B69 PCIE_RXN1
B70 GND
B71 N/C
B72 N/C
B73 N/C
B74 N/C
B75 N/C
B76 N/C
B77 N/C
B78 N/C
B79 N/C
B80 GND
B81 N/C
B82 N/C
B83 N/C
B84 VCC_5V_SBY
B85 VCC_5V_SBY
B86 VCC_5V_SBY
B87 VCC_5V_SBY
B88 BIOS_DIS1#
B89 N/C
B90 GND
B91 N/C
B92 N/C
B93 N/C
B94 N/C
B95 N/C
B96 N/C
B97 SPI_CS0#
B98 N/C
B99 N/C
B100 GND
B101 FAN_PWMOUT
B102 FAN_TACHIN
B103 SLEEP#
B104 VCC_12V
B105 VCC_12V
B106 VCC_12V
B107 VCC_12V
B108 VCC_12V
B109 VCC_12V
B110 GND
PCIE_TXN5 A56
GND A57
PCIE_TXP4 A58
PCIE_TXN4 A59
GND A60
PCIE_TXP3 A61
PCIE_TXN3 A62
DIO_1 A63
PCIE_TXP2 A64
PCIE_TXN2 A65
GND A66
DIO_2 A67
PCIE_TXP1 A68
PCIE_TXN1 A69
GND A70
N/C A71
N/C A72
N/C A73
N/C A74
N/C A75
N/C A76
N/C A77
N/C A78
N/C A79
GND A80
N/C A81
N/C A82
N/C A83
N/C A84
DIO_3 A85
N/C A86
N/C A87
COM_EXP_CLK_P A88
COM_EXP_CLK_N A89
GND A90
SPI_POWER A91
SPI_MISO A92
DIO_4 A93
SPI_CLK A94
SPI_MOSI A95
COM_TPM_PP A96
N/C A97
UART_TX0 A98
UART_RX0 A99
GND A100
UART_TX1 A101
UART_RX1 A102
LID# A103
VCC_12V A104
VCC_12V A105
VCC_12V A106
VCC_12V A107
VCC_12V A108
VCC_12V A109
GND A110