IEI Technology PSB-810EAV User manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | [e-mail] | www.artisantg.com
SM
View
Instra

1
PSB –810EAV
Pentium® III, Celeron™, VIA Cyrix® III with
Ethernet, VGA/TV, Audio SBC
Ver 1.x
@Copyright 2000
All Rights Reserved.
Manual first edition March 7, 2000
The information in this document is subject to change without prior
notice in order to improve reliability, design and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of the
possibility of such damages.
This document contains proprietary information protected by
copyright. All rights are reserved. No part of this manual may be
reproduced by any mechanical, electronic, or other means in any
form without prior written permission of the manufacturer.
Trademarks
PSB-810EAV is registered trademarks of ICP Electronics Inc., IBM
PC is a registered trademark of International Business Machines
Corporation. Intel is a registered trademark of Intel Corporation.
AWARD is registered trademarks of Award Software Internation®
Inc. Other product names mentioned herein are used for
identification purposes only and may be trademarks and/or
registered trademarks of their respective companies.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

2
Contents
1. Introduction...........................................................5
1.1 Specifications ..............................................................................6
1.2 What You Have ...........................................................................7
2. Installation ............................................................8
2.1 PSB-810EAV's Layout .................................................................8
2.2 Clear CMOS Setup ......................................................................9
2.3 BIOS Protection Setting.............................................................. 9
2.4 System Power On/Off by Keyboard............................................10
2.5 TV OUT Setting .........................................................................10
3. Connection.........................................................11
3.1 Floppy Disk Drive Connector......................................................11
3.2 PCI E-IDE Disk Drive Connector................................................12
3.3 TV Out Connector......................................................................12
3.4 Parallel Port...............................................................................13
3.5 Serial Ports................................................................................14
3.6 Keyboard/Mouse Connector.......................................................14
3.7 USB Port Connector...................................................................15
3.8 External Switches and Indicators................................................15
3.9 IrDA Infrared Interface Port .......................................................16
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

3
3.10 Fan Connector ..........................................................................17
3.11 PS-ON Connector......................................................................17
3.12 LAN RJ45 Connector ................................................................18
3.13 VGA Connector .........................................................................18
3.14 Audio Connectors .....................................................................18
3.15 LAN LED Connector ..................................................................19
4. BIOS Setup ........................................................20
4.1 Introduction................................................................................20
4.2 Starting Setup............................................................................20
4.3 Using Setup...............................................................................21
4.4 Main Menu.................................................................................22
4.5 Standard CMOS Setup ..............................................................25
4.6 Advanced BIOS Setup ...............................................................29
4.7 Advanced Chipset Setup............................................................34
4.8 Integrated Peripherals................................................................38
4.9 Power Management Setup.........................................................42
4.10 PnP/PCI Configuration Setup.....................................................46
4.11 PC Health Status.......................................................................48
4.12Frequency/Voltage Control.........................................................49
4.13 Defaults Menu............................................................................50
4.14 Supervisor/User Password Setting............................................51
4.15 Exit Selecting.............................................................................52
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

4
Appendix A. Watch-Dog Timer...............................53
Appendix B. Address Mapping...............................55
Appendix C. ATX Power Supply.............................57
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

5
1
Introduction
Welcome to the PSB-810EAV Pentium® III, Celeron Single
Board Computer. The PSB-810EAV board is a PCI form
factor board, which comes equipped with high performance
Pentium® III, Celeron™,VIA Cyrix®
¢» Processor and
advanced high performance multi-mode I/O, designed for the
system manufacturers, integrators, or VARs that want to
provide all the performance, reliability, and quality at a
reasonable price.
In addition, the PSB-810EAV provides on chip VGA. The
VGA which provides up to 1600x1200 resolution. The VGA
memory is share main memory.
An advanced high performance super AT I/O chip –ITE
IT8712 is used in the PSB-810EAV board. Both on-chip
UARTs are compatible with the NS16C550. The parallel port
and IDE interface are compatible with IBM PC/AT
architecture's.
PSB-810EAV uses Intel 82559 Fast Ethernet Multifunction
PCI Controller as LAN controller. The 82559 is a fully
integrated 10BASE-T/100BASE-TX LAN solution with high
performance networking functions and low power features.
PSB-810EAV uses the advanced INTEL Chipset,810E
which is 100% LPC/PCI software compatible chipset.with PCI
2.2 standard.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

6
1.1 Specifications :
•CPU : Celeron™ 300-550Mhz or above Processor
Pentium® III(FC-PGA) 450 -700Mhz or above Processor VIA
Cyrix®
¢» 466MHz or above
•FSB : Support 66/100/133MHz
•Bus : PCISA connector with PCI signal only, compatible to Jump
PISA Ver. 1.07
•DMA channels : 7
•Interrupt levels : 15
•Chipset : Intel 810E(810/810DC-100)
•RAM memory : Single 168-pin DIMM sockets support SDRAM
module. The max memory is up to 256MB.
•Ultra ATA/33/66 IDE Interface : Two PCI Enhance IDE hard
drives. The south bridge ICH0/ICH supports Ultra ATA/33/66 IDE
interface.
•Floppy disk drive interface : Single 2.88 MB, 1.44MB, 1.2MB,
720KB, or 360KB floppy disk drive.
•Two high speed Series ports : NS16C550 compatible UARTs
•Bi-directional Parallel Port
•
Built-in IT8712 to monitor power supply voltage and fan
speed status.
•IrDA port : Support Serial Infrared(SIR) and Amplitude Shift
Keyed IR(ASKIR) interface.
•USB port : Support two USB ports for future expansion.
•AC’97 Codec : Support two channel Left/Right Line IN/OUT, MIC
IN, CD IN, and PC beep sound for buzzer.
•Watch-Dog Timer : can be set by 1,2,3…255 seconds/minutes
period. Reset or NMI was generated when CPU did not
periodically trigger the timer. Your program use INT15 to control
the watch-dog and generate a system reset.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

7
•VGA Controller : Embedded VGA controller, share main
memory . Screen Resolution : up to 1600x1200 in 8-bit
Color at 85Hz Refresh.
•Intel 82559 Fast Ethernet Multifunction PCI Controller :
IEEE 802.3u Auto-Negotiation support for 10BASE-
T/100BASE-TX standard. Fast back-to-back transmission
support with minimum interframe spacing. Connected to
your LAN through RJ45 connector.
•Keyboard connector
•CH7008A TV out Function
•Mouse : PS/2 Mouse Port on-board.
•Power Consumption : +5V @ 4.5A, +12V @ 0.2A (FCPGA PIII-
500 and 128MB DRAM under 3Dmark99 testing)
•Operating Temperature : 0°~ 60°C ( CPU needs Cooler)
1.2 What You Have
In addition to this User's Manual, the PSB-810EAV package
includes the following items:
•PSB-810EAV Celeron™, Pentium® III Single Board
Computer
•RS-232/Printer Cable x 1
•FDD Cable x 1
•IDE HDD DMA66 Cable x 1
•Audio/RS-232 Cable x 1
•CD-ROM Driver x 1
•6-pin Mini-Din to 5-pin Din Keyboard & PS2 Mouse Adapter
Cable x 1
If any of these items is missing or damaged, contact the
dealer from whom you purchased the product. Save the
shipping materials and carton in case you want to ship or
store the product in the future.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

8
2
Installation
This chapter describes how to install the PSB-810EAV. At first,
the layout of PSB-810EAV is shown, and the unpacking
information that you should be careful is described. The
jumpers and switches setting for the PSB-810EAV's
configuration, such as CPU type selection, system clock
setting, and watch dog timer, are also included.
2.1 PSB-810EAV's Layout
CPU
82810E
82801AB
82559
CN23
CN21
CN19
CN7
CN9
CN20
CN8
BZ1
CN11 IDE2
CN13 IDE1
CN22
CN14
CN4
CN17
CN18
JP2
JP7
JP6
CN25
JP8
CN16
CN15
CN10
CN5 CN12
CN6
CN1
CN2
CN26
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

9
2.2 Clear CMOS Setup
If want to clear the CMOS data (for example you forgot the
password, you should clear the CMOS and then set the
password again.), you should close the JP7(2-3) about 3
seconds, then open.
•JP7 : Clear CMOS Setup
3
2
1
JP7 DESCRIPTION
1-2Keep CMOS Setup
(Normal Operation)
2-3Clear CMOS Setup
2.3 BIOS Protection Setting
To protect the bios from writing, place the cap on the location 2-
3.
•JP6 : Flash Protection Setting
l l l
1 2 3
JP6 DESCRIPTION
2-3Locked
1-2Unlocked
l
l
l
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

10
2.4 System Power On by Keyboard when use ATX as
Power Supply
Use keyboard to turn on the system, if ATX power supply are
equipped.
•JP8 : Power On by Keyboard
1
2
3
JP8 DESCRIPTION
1-2Disabled
2-3Enabled
2.5 TV OUT Setting
Select the format of TV output signal.
This function is enabled by graphic driver in Windows OS.
•JP2
1
2
OPEN PAL
SHORT NTSC
l
l
l
l
l
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

11
3
Connection
This chapter describes how to connect peripherals, switches
and indicators to the PSB-810EAV board.
3.1 Floppy Disk Drive Connector
PSB-810EAV board is equipped with a 34-pin daisy-chain driver
connector cable.
•CN6 : FDC CONNECTOR
33 31 29 … 5 3 1
¡ ¡ ¡
…
¡ ¡ ¡
¡ ¡ ¡
…
¡ ¡ ¡
34 32 30 … 6 4 2
PIN NO. DESCRIPTION
PIN NO. DESCRIPTION
1GROUND 2REDUCE WRITE
3GROUND 4N/C
5GROUND 6N/C
7GROUND 8INDEX#
9GROUND 10 MOTOR ENABLE A#
11 GROUND 12 DRIVE SELECT B#
13 GROUND 14 DRIVE SELECT A#
15 GROUND 16 MOTOR ENABLE B#
17 GROUND 18 DIRECTION#
19 GROUND 20 STEP#
21 GROUND 22 WRITE DATA#
23 GROUND 24 WRITE GATE#
25 GROUND 26 TRACK 0#
27 GROUND 28 WRITE PROTECT#
29 N/C 30 READ DATA#
31 GROUND 32 SIDE 1 SELECT#
33 N/C 34 DISK CHANGE#
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

12
3.2 PCI E-IDE Disk Drive Connector
You can attach four IDE( Integrated Device Electronics) hard
disk drives to the PSB-810EAV IDE controller.
CN13 (IDE 1) : Primary IDE Connector
CN11 (IDE 2) : Secondary IDE Connector
•CN13/CN11 : IDE Interface Connector
39 37 35 … 5 3 1
¡ ¡ ¡
…
¡ ¡ ¡
¡ ¡ ¡
…
¡ ¡ ¡
40 38 36 … 6 4 2
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1RESET# 2GROUND
3DATA 7 4DATA 8
5DATA 6 6DATA 9
7DATA 5 8DATA 10
9DATA 4 10 DATA 11
11 DATA 3 12 DATA 12
13 DATA 2 14 DATA 13
15 DATA 1 16 DATA 14
17 DATA 0 18 DATA 15
19 GROUND 20 N/C
21 N/C 22 GROUND
23 IOW# 24 GROUND
25 IOR# 26 GROUND
27 N/C28 BALE -DEFAULT
29 N/C 30 GROUND -DEFAULT
31 INTERRUPT 32 IOCS16#-DEFAULT
33 SA1 34 N/C
35 SA0 36 SA2
37 HDC CS0# 38 HDC CS1#
39 HDD ACTIVE# 40 GROUND
3.3 TV Out Connector
The PSB-810EAV built-in two TV ports for the future new I/O
bus expansion.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

13
CN18 : RCA Connector(External)
CN17 : S-Video(Internal)
4
3
2
1
1. C
2. GND
3. Y
4. GND
3.4 Parallel Port
This port is usually connected to a printer, The PSB-810EAV includes
an on-board parallel port, accessed through a 26-pin flat-cable
connector CN1.
•CN10 : Parallel Port Connector
13 12 11 … 3 2 1
¡ ¡ ¡
…
¡ ¡ ¡
¡ ¡ ¡
…
¡ ¡ ¡
26 25 24 … 16 5 14
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1STROBE# 2DATA 0
3DATA 1 4DATA 2
5DATA 3 6DATA 4
7DATA 5 8DATA 6
9DATA 7 10 ACKNOWLEDGE
11 BUSY 12 PAPER EMPTY
13 PRINTER SELECT 14 AUTO FORM FEED #
15 ERROR# 16 INITIALIZE
17 PRINTER SELECT LN# 18 GROUND
19 GROUND 20 GROUND
21 GROUND 22 GROUND
23 GROUND 24 GROUND
25 GROUND 26 NC
l
l
l
l
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

14
3.5 Serial Ports
The PSB-810EAV offers two high speed NS16C550 compatible
UARTs with Read/Receive 16 byte FIFO serial ports.
CN5 : COM1
CN12 : COM2
5 4 3 2 1
¡ ¡ ¡ ¡ ¡
¡ ¡ ¡ ¡ ¡
10 9 8 7 6
•CN5/CN12 : Serial Port 10-pin Connector
PIN NO. DESCRIPTION
1DATA CARRIER DETECT (DCD)
2RECEIVE DATA (RXD)
3TRANSMIT DATA (TXD)
4DATA TERMINAL READY (DTR)
5GROUND (GND)
6DATA SET READY (DSR)
7REQUEST TO SEND (RTS)
8CLEAR TO SEND (CTS)
9RING INDICATOR (RI)
10 N/C
3.6 Keyboard/Mouse Connector
The PSB-810EAV provides 6-pin Min-DIN keyboard/mouse
connector.
•CN23 : 6-pin Mini-DIN Keyboard/Mouse Connector
PIN NO. DESCRIPTION
1KEYBOARD DATA
2MOUSE DATA
3GROUND
4+5V
5KEYBOARD CLOCK
6MOUSE CLOCK
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

15
•CN25 : 5-pin External Keyboard Connector
1
2
3
4
5
PIN NO. DESCRIPTION
1KEYBOARD CLOCK
2KEYBOARD DATA
3NC
4GROUND
5+5V
3.7 USB Port Connector
The PSB-810EAV built-in two USB ports for the future new I/O
bus expansion.
CN22 : USB 0(External)
CN14 : USB 1(Internal)
4
3
2
1
1.
VCC
2. DATA-
3. DATA+
4. GROUND
3.8 External Switches and Indicators
There are several external switches and indicators for
monitoring and controlling your CPU board. All the functions
are in the CN19 connector.
l
l
l
l
l
l
l
l
l
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

16
CN19 Pin Assignment and Functions :
19 17 … 3 1
¡ ¡
…
¡ ¡
¡ ¡
…
¡ ¡
20 18 … 4 2
FUNCTION PIN NO. DESCRIPTION
1SPK SIGNAL
3N/C
5N/C
SPEAKER
7VCC
9POWER GOODRESET 10 GROUND
13 LEDHDD LED 15 VCC
17 POWER BUTTONPOWER
BUTTON 19 GROUND
12 GROUND
14 N/C
16 PS_ON#
18 STANDBY VCC5V
ATX POWER
20 STANDBY VCC5V
2VCC5V
4N/C
POWER LED
6GROUND
RESERVE 8N/C
RESERVE 11 GROUND
3.9 IrDA Infrared Interface Port
The PSB-810EAV built-in a IrDA port which support Serial
Infrared(SIR) or Amplitude Shift Keyed IR(ASKIR) interface.
When use the IrDA port have to set SIR or ASKIR model in the
BIOS’s Peripheral Setup’s COM 2. Then the normal RS -232
COM 2 will be disabled.
•CN15 : IrDA connector
5
4
3
2
1
l
l
l
l
l
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

17
PIN NO. DESCRIPTION
1VCC
2N/C
3IR-RX
4Ground
5IR-TX
3.10 Fan Connector
The PSB-810EAV provides CPU cooling fan connector,
chassis fan connector. These connectors can supply
12V/500mA
to the cooling fan. In the connector there have a “rotation” pin .
The rotation pin is to get the fan’s rotation signal to system.
So the system BIOS could recognize the fan speed. Please
note only specified fan offers the rotation signal.
•CN1 : CPU Fan Connector
1
2
3
PIN NO. DESCRIPTION
1Ground
212V
3Rotation Signal
3.11 PS-ON Connector
This connector is used to control the ATX power supply.
•CN2 : PS-ON Connector
1
2
3
PIN NO. DESCRIPTION
1+5V Standby
2PS-ON
3Ground
l
l
l
l
l
l
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

18
3.12 LAN RJ45 Connector
PSB-810EAV is equipped with a built-in 10/100Mbps Ethernet
Controller. You can connect it to your LAN through RJ45 LAN
connector. The pin assignments are as following:
•CN16 : LAN RJ45 Connector
PIN NO.
DESCRIPTION PIN NO. DESCRIPTION
1TX+ 7. N/C
2TX-8. N/C
3. RX+ 9. Speed +
4. N/C 10. Speed -
5N/C 11. Active +
6. RX-12. Active -
3.13 VGA Connector
•CN21 : 15-pin Female Connector
1RED 2GREEN
3BLUE 4NC
5GROUND 6GROUND
7GROUND 8GROUND
9NC 10 GROUND
11 NC 12 DDC DAT
13 HSYNC 14 VSYNC
15 DDCCLK
3.14 Audio Connectors
The AC’97 Codec support several audio functions. The
connectors are described as below.
CN9 : LINE IN
l l l l
1 2 3 4
1. LEFT SIGNAL
2. GROUND
3. GROUND
4. RIGHT SIGNAL
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

19
CN20 : CD IN
4
3
2
1
1.
LEFT SIGNAL
2. GROUND
3. GROUND
4. RIGHT SIGNAL
CN8 : MIC IN
l l l l
1 2 3 4
1. MIC IN
2. GROUND
3. GROUND
4. REF
CN7 : Left/Right Audio Output Connector
l l l l
1 2 3 4
1. LEFT SIGNAL
2. GROUND
3. GROUND
4. RIGHT SIGNAL
3.15 LAN LED Connectors
The pin assignments are as following
CN26 : LAN LED
¡ ¡
¡ ¡
1 3
2 4 LAN LED
+ - Description LED ON LED OFF LED Flashing
2 1 Speed 100Mbps 10Mbps NA
4 3 Link/Active Link Ok Link Fail Sending or Receiving
l
l
l
l
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com