ARGON18 E-118 NEXT User manual

E-118 NEXT: TRAVEL GUIDE
All manuals and user guides at all-guides.com

1
E-118 NEXT: TRAVEL GUIDE
The following steps will help you to quickly disassemble the E-118 NEXT front-end for travelling purposes.
All manuals and user guides at all-guides.com

1. First remove the 3 stem cap screws
and the stem cap to get access to the
handlebar.
2
E-118 NEXT: TRAVEL GUIDE
All manuals and user guides at all-guides.com

2. Remove the 4 M6 screws
3
E-118 NEXT: TRAVEL GUIDE
All manuals and user guides at all-guides.com

3. Carefully lift the handlebar
upward. You can replace the
handlebar screws on the fork head
to avoid losing any parts.
4
E-118 NEXT: TRAVEL GUIDE
All manuals and user guides at all-guides.com

4. Place the handlebar as shown
in the picture. You should use
protective material between the
frame and the handlebar to avoid
any damage.
5
E-118 NEXT: TRAVEL GUIDE
All manuals and user guides at all-guides.com

6
E-118 NEXT: TRAVEL GUIDE
5. Secure the handlebar to the
frame and fork by using straps.
All manuals and user guides at all-guides.com

Note : If you use an electronic
shifting system, you may have to
unplug the connector wires.
7
E-118 NEXT: TRAVEL GUIDE
All manuals and user guides at all-guides.com