Argos Amalfi Armchair 1425361 User manual

Width - 72.0cm
Depth - 58.0cm
Height - 104.0cm
Assembly Instructions - Please keep for future reference 1425361
Dimensions
Amalfi Armchair
Issue 1 -19/11/13
Important - Read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456400800

1
Care and maintenance
Safety and Care Advice
Important - Read these instructions fully before starting assembly
• Check you have all the components and
tools listed on page 2.
• Remove all fittings from the plastic bags
and separate them into their groups.
• Make sure you have enough space to
layout the parts before starting.
• Do not stand or put weight on the
components during assembly, this
could cause damage.
• Assembly on a soft level surface to
avoid damaging the unit or your floor.
• Parts of the assembly will be easier
with 2 people.
• Keep children and animals away from
the work area, small parts could choke if
swallowed.
• Dispose of all packaging carefully and
responsibly.
•Do not stand on this chair.
•Warning: The unit weighs approximately
64.6 kgs. Please lift with care.
• Wash frame parts with mild
soap and water, rinse thoroughly,
and dry completely. Do not use
bleach, acid, or other solvents
on the frame parts.
!
• We recommend the use of
furniture covers when not in use.
• Inspect and tighten all bolts
and fasteners on a regular basis
to ensure the proper performance
and safety of your chair.
• In order to prolong the life and
beauty of your chair, we
recommend that it be stored in a
dry and protected area when not
in use .

Note: The quantities below are the correct amount to complete the assembly.
E
M6 x 14mm Bolt x 4 M6 x 16mm Bolt x 4 M6 x 35mm Bolt x 4
M6 Bolt Cap x 4
M6 Bolt Cap x6 Bolt Cap x 4
d6.5 x D13 x 1.0 Washer x 8 d6.5 x D10 x 1.6 Washer x 8
Components - Parts
Tools required
Please check you have all the parts listed below
Components - Fittings
Please check you have all the fittings listed below
2
Ruler - Use this ruler to help correctly identify the screws
A
D
GH
B C
F
E
1 2 3
Seat Assembly x 1
4Support x 1
Left Arm x 1 Right Arm x 1
35
4mm Hex Key 6mm Hex Key

Step 1
Step 2
1
Assembly Instructions
3
1
1
Note:
Make sure that the bolts on
the seat assembly are
loose prior to assembling
this chair.
B
D
E
A
2
3
3
4
L
R
A
DE
Place the support to the
left arm and the right arm
by using bolts ( and ),
washers ( and ) . Keep
the bolts loose.
Note:
The labels marked “L” and “R”
on arms ( and ) should
coincide with Step 2 to ensure
proper assembly.
B
2
2
3
3
4
4

2
2
3
1
1
C
C
4
Step 3
Step 4
Assembly Instructions
A
A
DE
2
3
3
1
1
L
R
Place the seat assembly to
the left arm and the right
arm by using bolts ( and
) , washers ( and ) .
Keep the bolts loose.
B
B
D
E
2
3
1
Turn the chair to its upright
. At the back of the
chair, fasten the seat assembly
to the arms ( and )
by using bolts and washers
( and ) .
D
12 3
C
DE
E
DE

1
1
H
F
G
3
Assembly is completed.
5
Step 5
Assembly Instructions
If you need help or have damaged or missing parts, call the Customer Helpline: 08456400800
Retailer: Argos
Address: 489-499 Avebury Boulevard Saxon Gate West, Central Milton Keynes Bucks, MK9, 2NW
Tighten the bolts on the seat
assembly . Make sure that
all of the bolts have been
tightened completely and cover
them with bolt caps ( ,
and ).
1
F
H
G