Argos Alex Headboard 634/1880 User manual

Step 7
Alex Headboard
If you need help or have damaged or missing parts, call the
Assembly Instructions - Please keep for future reference 634/1880
634/1897
Important - Please read these instructions fully before starting assembly
Dimensions
Width x Depth x Height
92cm x 5cm x 53.5/105cm (Single)
136cm x 5cm x 53.5/105cm (Double)
634/3541
634/3558
Customer Helpline:0345 6400800
Issue 2 - 25/10/14

Safety and Care Advice
Important –Please read these instructions fully before startingassembly
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Assembly requires 2 people.
• Do not fully tighten bolts until
the whole bed is assembled.
Do not overtighten the nuts to
avoid causing damage to the
threads.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose bolts or
screws on this unit..
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
1
• Assemble all parts and bolts
loosely during assembly,only
once the product is complete
• Regularly check and ensure
that all bolts and fittings are
tightend properly..
H andy
should you fully tighten the bolts.
H ints
• To reduce
the lik elihood of
damaging your
product please
power drill is set on a low torque
setting.
• Dispose of all packaging
carefully and responsibly.
.
ensure that your

Components
2
1 Headboard
2 Support arms x 2
Please check you have all the parts listed below
If you have damaged or missing components,
call the
(Single) (Double)
Customer Helpline:0345 6400800

Components - Fittings
3
Please check you have all the fittings listed below
Tools required
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
M8 Bolt x 4
A
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
M8 Flat washer x 4
B
Phillips screwdriver

Assembly Instructions
4
Attaching support arms
Attach the two support
arms to the rear of the
headboard using bolts
and washers as
shown.
Assembly is complete.
2
1
2
2
1
A
A
B
A
B
A
B
A
B
B