Argos Habitat Maine 2 Shelf Small Bookcase... User manual

Simple Assembly Instructions - Please keep for future reference
IMPORTANT
1. Read these instructions carefully and
familiarise yourself with the procedure
before assembling the unit.
2. Check that you have all the component
parts following the list on the back
cover and familiarise yourself with
each part before proceeding.
3. Take all the fittings out of the plastic bag
and separate them into their groups.
4. Ensure you have enough space to lay out
all the parts before assembly.
Frosted Edge Mirror + Shelf
Components
5. To avoid scratching it is recommended
that you assemble the unit on a soft
level surface.
Fittings
5-05
A
B
C
G
ED
F
4 x Wall Plug
B4 x Screw
C
A2 x Screw
4 x Plastic Washer
E1 x Tool
F
D2 x Rubber Washer
1 x Glass Shelf
1 x Mirror
2 x Long Tube
2 x Short Tube
4 x Glass Support4 x Plastic Plug
2 x Cover

Assembly Instructions Assembly Instructions
Stage 2 – Wall MountingStage 1 – Fitting the Shelf
fig. 1 fig. 2
fig. 4
fig. 5
BS 7449:1991
Model / Catalogue Number: 832/2522
Retailer: ARG
Retailer address: 
489-499 Avebury Boulevard, Saxon
Gate West, Central Milton Keynes,
Bucks, MK9 2NW
IMPORTANT: When drilling into
walls always check that there
are no hidden wires or pipes etc.
Make sure that the screws and
wall plugs supplied are suitable
for supporting the unit. Consult
a qualified tradesperson if you
are not sure.
fig. 3
NOTE: This unit contains
tempered glass of nominal
thickness of 5mm and complies with
Class C of BS 6206. If the glass is
chipped or broken, replace with glass
of the type described on this label.
Consult the furniture retailer or agent
with regard to obtaining a
manufacturing specification of the
shape for replacement glass quoting
the model number, and batch number
or date of manufacture of this item.
NOTE: It would be useful to ask
someone to help you at this
stage.
WALL MOUNTING: Hold the unit
against the wall in the desired
location and check if it is
horizontal. Mark the wall to
indicate where to drill the holes.
See fig. 4.
1. Insert the Plastic Plugs D onto
the end of Long Tube C and
Short Tube G. Ensure they are
well fitted.
See fig. 1 and 2.
2. Use Screw Ato fix the Short
Tube G onto the Long Tube C.
See fig. 3. 1. Use the Wall Plug Bto fit to the
hole. Then screw in the Screws C
through the unit into the Wall Plugs.
See fig. 5.
3. Use the same method as in fig.
1 to 3 fix the other Tubes.
G
D
C
D
G
C
A
C
B

Assembly Instructions Assembly Instructions
Stage 4 – Finishing the UnitStage 3 – Fitting the Mirror
fig. 8
fig. 6
fig. 9
fig. 7
Care and Maintenance
Safety
To avoid any risk of suffocation to animals or children dispose of the plastic
bags immediately.
Fitting
From time to time please ensure there are no loose screws on the product.
Cleaning
As with all surfaces clean with a damp cloth and mild detergent, do not use bleach
or abrasive products.
WARNING: Do not strike the
glass with hard or pointed items.
Do not sit or stand on the glass surface,
as this will cause a hazard.
When cleaning the glass use a damp cloth
or chamois leather with washing up liquid.
Do not use washing powders or any other
substances containing abrasives since
these substances will scratch the glass.
It is essential that this unit be fixed to a
wall with the fixings provided.
NOTE: It would be useful to ask
someone to help you at this
stage.
CAUTION: When handling
glass always take extra care.
Ensure no children are in the assembly
area.
1. Insert the Glass Supports E into
the tubes.
See fig. 6.
1. Carefully place the Glass Shelf A
onto the unit.
See fig. 8.
2. Use Covers F, Rubber Washers
Dand Plastic Washers Eto fix
the Mirror B onto the unit.
See fig. 7.
E
EA
F
D
B
NOTE: Before use always make
sure the unit is secure.
D
E
E

No.2 "General Purpose" Wall Plug
Aerated / Breeze Block
Generally aerated blocks should not be
used to support heavy loads, use a
specialist fitting in this case.
For light loads, a General Purpose Plug
can be used.
A Guide to A Guide to
Wall Mounting & FixingsWall Mounting & Fixings
No.5 "Cavity Fixing - Heavy Duty"
Wall Plug
For use when fitting or supporting heavy
loads such as shelving, wall cabinets,
coat racks.
No.6 "Hammer Fixing" Wall Plug
For use with walls stuck with plaster board.
The hammer fixing allows it to be fixed to
the wall rather than the plaster board.
Always check the fixing is secure to the
retaining wall.
HINTS:
1) General Rule Always use a larger screw and wall plug if you are not sure.
2) Ensure you use the recommended drill bit to match the wall plug and hole size.
3) Ensure you drill the hole horizontally, do not force the drill or enlarge the hole.
4) Take extra care when drilling high walls, ceilings and ceramic tiles. Ensure the
plug is fitting below the ceramic tile to avoid splitting or cracking.
5) Ensure wall plugs are well fitted and are a tight fit in the drilled hole.
IMPORTANT:
When drilling into walls always check
that there are no hidden wires or pipes
etc. Make sure that the screws and wall
plugs being used are suitable for
supporting your unit. Consult a qualified
tradesperson if you are unsure.
No.3 "Shield Anchor" Wall Plug
Heavy Loads
For use with heavier loads such as TV
& HiFi Speakers and Satellite Dishes etc.
No.4 "Cavity Fixing" Wall Plug
For use with plaster board partitions or
hollow wooden doors.
Types Of Walls
You can use one of the following types
of wall plug if your walls are made of brick,
breeze block, concrete, stone, wood or
plaster board.
No.1 "Standard" Wall Plug
General Wall Materials
These come in various sizes and are
made from plastic or sometimes wood
fiber.
CARE & MAINTENANCE
SAFETY
Always check the fitting and location to ensure your safety in and around the home.
FITTING
From time to time check the fitting to ensure the wall plugs or screws do not become
loose.