Argos Le Marais Double Unit Grey 502/6797 User manual

Le Marais
Double Unit
Issue 3 - 05/28/21
Spare Parts
www.argos-support.co.uk
[e-mail]
0370 112 1928
Customer Support
0345 640 2020

2
Safety and Care Advice
Product Details
502/6797 Le Marais Double Unit Grey
936/0703 Le Marais Double Unit White
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough space
to layout the parts before
starting.
Care and maintenance
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Only clean using a damp cloth
and mild detergent. Do not use
abrasive cleaners.
Use a dry cloth to clean the
product, furniture polish is
not recommended.
•From time to time check that there
are no loose screws, nuts or bolts.
If there are please re-tighten.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
• This product has been
constructed to be used in the
domestic environment only and
not for commercial purposes.
Assemble on a soft level
surface to avoid damaging the
Assemble the item as close
room) as possible.
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.

Hinge × 4
N
Hardware
Fittings
3
Metal Dowel x 20
A
Locking Nut x 20
B
8x30mm Wooden Dowel x 2
C
35mm Screw x 9
Runner x 4
D
12mm Screw x 12 14mm Screw x 24
E F
G
14mm Screw x 2
H I
10mm Bolt x 4
J
18mm Bolt x 4
Metal Support x 8
K
Hanger bracket x 2
L
Handle x 4
M

4
Phillips screwdriver
(small & medium)
Phillips screwdriver
(small & medium) Eye protection
(when using a
hammer or glue)
Large hammer
Pencil
Ruler/tape
measure
Power Drill
Drill Heads
Tools required

Top panel
(640 x 330mm) 4
(770 x 588mm)
3
Left drawer side x 2
(280 x135mm)
Right drawer side x 2
(280 x135mm)
11
Bottom panel
15 Rail
(578 x 60mm)
16
Drawer bottom x 2
(276 x 257mm)
13 14
Left side panel
(760 x 315mm)
1Right side panel
(760 x 315mm)
2
Panels
5
Back panel
(640 x 330mm)
5Left door panel
(286 x 594mm)
Right door panel
(286 x 594mm)
6
910 12Left drawer front
(286 x 160mm)
Clapboard panel
(283 x 155mm)
Right drawer front
(286 x 160mm)
7
Drawer back x 2
(248 x 135mm)
8
Adjustable shelf ×2
(576 x 283mm)

2Metal Dowel x 2
C
12mm Screw x 6
E
Runner x 2
Fix part
Screw
Front
Slide part
6
1D
A
A
A
E
EE
E
E
D
D
D
D
1
1
2
2
Front
Front
Metal Dowel x 20
A
Locking Nut x 20
B
8x30mm Wooden Dowel x 2
C
35mm Screw x 9
Runner x 4
D
12mm Screw x 12 14mm Screw x 24
E F
G
14mm Screw x 2
H I
10mm Bolt x 4
J
18mm Bolt x 4
Metal Support x 8
K
Hanger bracket x 2
L
Handle x 4
M
E
E

3
4
7
Metal Dowel x 4
BB
a b c
A
B
Locking Nut x 2
C
8 x30mm Wooden Dowel x 2
A
A
B
C
C
1
4
2
16

8
6Metal Dowel x 6
M
14mm Screw x 2 Hanger Bracket x 2
L
B
Locking Nut x 4
5
A
A
A
A
M
M
L
L
4
2
3
B
B

8
9
Turn
Product
78
9
9
9
C
12mm Screw x 6
E
Runner x 2
D
Fix part
Screw
Front
Front
Front
Slide part
E
D
D
Fix part
Screw
Front
Slide part
E
D
D
D D
E
E

10
10
Turn
Product
9
3
B
B
3
9
B
Locking Nut x 2
B
Locking Nut x 4
B
35 mm Screw x 1
J
B
B
J

12
11
K
C
14mm Screw x 8
F
Hinge x 4
N
F
F
N
N
K
11 K
Metal Support x 8
7
7
5
6

14
12
ab
cd
F
NN
NN
C
14mm Screw x 16
F
GH
F
F
13
18mm Bolt x 2
Handle x 2
5
5
6
6
G
G
H
H

13
16 Metal Dowel x 8
A
L
WARNING!
Wall fixings are not supplied.Please refer
to A Guide To Wall Mounting & Fixings, page 16.
15
11
A
10
A

14
18
B
35 mm Screw x 8
J
Repeat
x2
17
10
10
13
13
11
11
14
15
12
J
J
B
B
B
B
B
Locking Nut x 8
1.5mm 10.5mm
1.5mm
10.5mm

15
20
GG
HH
D
I
I
I
19
10
10
11
11
7
GH
18mm Bolt x 2
I
10mm Bolt x 4
Handle x 2

Important note:
Important: When drilling into walls always
check that there are no hidden wires or pipes etc.
If plastic wall plugs
are supplied with your
product:
- these are only suitable for
use in masonry walls.
If you are in any doubt about
the correct wall plugs for
your wall, seek professional
advice.
Failure of the product due to
using incorrect fixings is the
responsibility of the installer.
Make sure that the screws and wall plugs being used
are suitable for supporting your unit. Consult a qualifed
tradesperson if you are unsure.
Hints:
1: General rule: Always use a larger screw and wall plug
if you are not sure.
2: Ensure you use the recommended drill bit to match the wall
plug and hole size.
3: Ensure you drill the hole horizontally, do not force the drill or
enlarge the hole.
4: Take extra care when drilling high walls, ceilings and ceramic
tiles. Ensure wall plugs are inserted beyond the thickness of
the ceramic tiles to avoid the tiles splitting or cracking.
5: Ensure wall plugs are well fitted and are a tight fit in the
drilled hole.
Types of walls You can use one of the following types of wall plug if your
walls are made of brick, breeze block, concrete, stone or wood.
Generally aerated blocks should not
be used to support heavy loads, use
a specialist fitting in this case. For light
loads, general purpose wall plugs can
be used.
For use with plasterboard partitions or
hollow wooden doors.
For use with walls stuck with
plasterboard. The hammer fixing allows
it to be fixed to the wall rather than the
plasterboard. Always check the fixing
is secure to the retaining wall.
For use when attaching light loads on
to plasterboard partitions.
For use when fitting or supporting
heavy loads such as shelving, wall
cabinets and coat racks.
For use with heavier loads such as TV
& HiFi speakers and satelite dishes etc.
No.1 “General Purpose” wall plug No.3 “Cavity Fixing” wall plug No.5 “Hammer Fixing” wall plug
No.2 “Plasterboard” wall plug
No.4 “Cavity Fixing-Heavy Duty”
wall plug
No.6 “Shield Anchor” wall plug
Heavy loads
A Guide to Wall Mounting & Fixings
Care &
Maintenance
Safety: Always check the fitting
and location to ensure your safety
in and around the home.
Fitting: From time to time check
the fitting to ensure the wall plugs
or screws do not become loose.
16