Argos Luna hygena 457/7553 Datasheet

Assembly lnstructions - Please keep for future reference
Luna Low Wide TV Unit
Width - 120cm
Depth - 40cm
Height -45cm
Dimensions
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800
Important - Please read these instructions fully before starting assembly
Issue 1-15-10-15
457/7553
hygena

1
Safety and Care Advice
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all ttings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Assemble the item as close
to its nal position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your oor.
Assembly requires 2 people.
Do not stand or put excessive
weight on the product,this could
cause damage.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers and
Allen keys.
Dispose of all packaging
carefully and responsibly.
Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
From time to time check that
there are no loose screws on
this unit.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
This product has been nished using natrual materials. As a living material, you may notice some
variation in the grain and colour shade between the dierent components.
Unlike a synthetic or man-made material which has a uniform nish, a feature of natural wood is its
variation in grain and colour. We wish to reassure you that this is quite normal and is not the result
of any manufacturing fault.
Where sheets of wood are joined together, a line may be detected. Again, this is normal and is not
an imperfection.
The natural nish should be cared for by the periodic application of a good quality 'was' based
domestic furniture polish (Not silicone!!). Occasional / small spills should be removed immediately
using a damp cloth.
Do not allow hot articles to come into contact with the surface, as damage will occur!

Components - Parts lf you have damaged or missing components.
call the Customer Helpline: 0345 6400 800
2
6
5Divider (left)
(37.5x26 x 1.5cm)
4
12
Divider (right)
(37.5x27.5x1.5cm)
Side frame (right)
(43x38x5cm)
3
Side frame (left)
(43x38x5cm)
Door x 2
(28.5x25.5x1.5cm)
Top
(120x40x2.5cm)
7Base panel
(106x36x1.5cm)
8Apron
(106x5x1.5cm)
10
9
(44.6x37x1.2cm)
Top stretcher
(106x2.6x1.5cm)
12
(108.3x29.9x0.3cm)
Shelf
Back panel
11
(3x3x13cm)
Foot x 2
underside
inside
top
inside

3
0345 6400 800
B C
D
G
E F
A
F
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Tools required
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150
1 2 3 4 5 6 Ruler/tape measure
Components - Fittings
Metal dowel x 16 Large locking nut x 12
Wooden dowel (6X30mm) x23
Phillips screwdriver
(Not supplied)
Door stop x 2
Screw (4x30mm) x 3
Screw (3x10mm) x 4
Screw (4x12mm) x 16
Handle x 2
Hinges x 4 Allen key x 1 Shelf support pin x 4
Screw (4x18mm) x 2
H
Small locking nut x 4
J
L M
Q P
Screw (5x40mm) x 6
K
N
Screw (2.5x10mm) x 16

4
Assembly Instructions
1
10
1
4
5
6
38
2
BB
underside
X2
B
B
B
A
A
B
E
F
E
F
G
G
A
N
H
Preparing panels
Place top and side frames
and and apron
at on the oor with the xing
holes facing up.
Screw metal dowels into
all panels as shown.
Note: Screw metal dowels as far
as shown. Do not overtighten.
Insert wood dowels into side
frames and as shown .
Preparing panels
a: Fit door stops to dividers
and using screws .
b: Fit door hinges to doors
using screws .
c: Insert wood dowels into
the underside of top .
Locate top stretcher into
position and secure using
screws .
1
2
2 3
3 8
B
A
BF
BE
BN
BH
BG
BA
4 5
6
10
1
a:
b:
C:

7
7
3
7
11
11
8
8
5
Assembly Instructions
BC
BC
BC
C
J
J
Q
A
Assembling base panel
TOP
Locate apron into position.
Insert large locking nuts
into the holes in the underside
of base .
Turn locking nuts clockwise
to secure.
Insert large locking nuts
into the holes in base panel
and apron .
Turn locking nuts clockwise
to secure.
Locating base panel
a: Insert wood dowels into
the holes along the edge of base
panel .
b: With help , assemble feet
to base panel using
screws .
BA
BC
BC
BJ
7
8
7
11
7
Locate the base panel assembly
onto right side frame .
3
7
8
a:
b:

4
5
7
7
3
3
2
6
Assembly Instructions
BC
BC
BC
J
Q
A
Assembling side panel
Locate left side panel into
position.
Secure using large locking nuts
.
Assembling dividers
Carefully turn the unit onto it’s
back.
Insert wood dowels into
the bottom of dividers and
as shown.
Assemble left and right dividers
and to the base panel
using xings
Note: Ensure the cut outs in one
corver of dividers and
and at the front.
2
BC
BA
BJ
4
4
5
4 5
5
Left
Right
Cut outs
at front

4
5
1
12
3
2
Assembly Instructions
7
8
BC
A
K
C
D
D
C
Assembling top
With help , carefully stand the
unit upright.
Fitting back panel
Carefully lay the unit at onto it’s
face.
Locate back panel into
position and secure using screws
.
Insert wood dowels into the
top of side frames and
and dividers and .
Insert small locking nuts into
side panels and .
Insert large locking nuts into
dividers and .
Turn locking nuts to secure.
Locate top into position.
4 5
1
2 3
BC
BD
BA
2 3
4 5
11
BK
D

9
6
6
3
5
4
2
a:
b:
6
Assembly Instructions
8
9
P
P
H
M
L
H
Assembling doors
a: Assemble doors to side
frames and using
screws .
b: Insert shelf support pins
into dividers and at
the desired height
Carefully locate shelf onto
the support pins.
Fit handles to doors using
screws .
BP
BL
BM
BH
9
4 5
6
2 3
X4

Assembly Instructions
9
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800
Home Retail Group. 489-499 Avebury Boulevard. Saxon Gate West. Central Milton Keynes. MK9 2NW
10