Aristel AN1912 User manual

Installation
NOTE: This 4G video intercom is suitable for
surface mounting.
NOTE: install suggestion
Fix the video intercom on the wall by
screws.
The view angle of this video intercom
should be around 80°. The height of the
lens position is suggested between
145cm~160 cm from the ground and the
camera shall avoid facing the sunlight
directly
The intercom distance is 50 cm
1. SIM card installation
1.1 Disconnect the 12V adaptor from the intercom
1.2 Remove the rear cover
1.3 Before inserting the SIM card, ensure that it is not PIN number locked. (If locked, use
a mobile
phone to unlock it).
1.4 Insert the SIM card (Note orientation of notched corner)
1.5 Replace rear cover
2. Connecting with the door lock system
2.1 According your door lock type to wire with door latch of connector. (see page 6)
3. Install our App on mobile phone. (download at page 7)
4. Administrator should register an account then add device, room, resident, RFID card and
PIN code.
5. Administrator should add room and resident for each resident by entering their mobile
number to grant them access to register to the intercom via the APP. (see page 11)
6. All resident should register an account and same server with the device via the APP, then
they can access the intercom.
1/3
AN1912 4G VIDEO INTERCOM
QUICK INSTALL GUIDE

Relay time setting
7 kinds of relay action time to choose
1. Press the button to switch the relay action time
2. Check the LED status at the right side
NOTE: ■LED light Solid □LED light off
LED status
1.
■
□ □
: 3 s
2.
□
■
□
: 8 s
3.
■ ■
□
: 15 s
4.
□ □
■
: 30 s
5.
■
□
■
: 60 s
6.
□
■ ■
: 300 s
7. ■■■: 600 s
NOTE:
If you want to reset the
internet setting of the device,
press the RESET button
about 5 to 10 seconds until
you hear the remind tone.
NOTE: The setting of
Network and APN will be
restored to default value.
Relay 1 status light
Relay 2 status light
DC
12V-24V
DC
12V-24V
DC
12V-24V
Reset
button
Fail safe
Fail secure
trigger
LED status
AN1912 4G VIDEO INTERCOM QUICK INSTALL GUIDE
2/3

AN1912 4G Video Intercom Unit
Operating the AN1912
Operating the intercom
1.Dial room number: Please press the room number directly
2.Password to open the door: Please press ＊ before entering the
password
“*” Key: press once to enter the
password “#” Key: 1. Hang up during
a call 2. Backspace
Use door intercom APP
Install Software
Search for Door Intercom in the
App Store or Google Play.
Download the “Door Intercom”
app.
＊＃
Speaker
Microphone
7-Segment
Display
RFID
Lens
Infrared light
Server connection
LED 1:
on disconnected
off connected
NOTE: After power on,
press any number key to
query the current status
of the device
4G network
LED 2:
on disconnected
off connected
NOTE: After power on,
press any number key
to query the current
status of the device
Keypad
AN1912 4G VIDEO INTERCOM QUICK INSTALL GUIDE
3/3
FOR MORE INFORMATION ON PROGRAMMING,
PLEASE SEE THE FULL USER GUIDE