Arlight SR-1009FA Series User manual

RF Wireless LED Dimmer
Feature
Reliable stable switch and dimming control function,control range≥20M.
Battery in the remote is with long life span. It normally can use for 2 years.
Dimming range 0.1-100%.
Model:SR-2833K4 with SR-1009FA series
Use with power repeater to expand the output power unlimitedly.
Enable to control four zones separately, And dim or ON/OFF four zones at same time ,each zone can be set endless
receivers, each receiver maximally be controlled by 8 different remotes.
Parameter
Switch on/off of lightings slowly, without any flash, meet the comfort of human eyes.
Remote
Receiver
Product Size
136.5
40.0
11.5
Enable be dimmed and ON/OFF by push button after connecting receivers.
Receivers can work with RF-WIFI converter after installing software on IOS and Android system.
Push dim function
Part No. Input Voltage Remarks
Current
SR-1009FA 12-36VDC Constant voltage
4x(60-180)W
4x5A
Output
SR-1009EA 12-36VDC Constant voltage
4x(96-288)W4x8A
SR-1009FA3 12-36VDC Constant current
4x(4.2-12.6)W
4x350mA
SR-1009FA7 12-36VDC Constant current
4x(8.4-25.2)W4x700mA
Part No. Operation Voltage DIMENSIONS
ø/h (mm)
Operation
Frequency
SR-2833K4 3VDC 39x136.5x10.7
434MHz/868MHz
REMARKS
RF Wireless
Brief introduction of buttons
12-36VDC power input
or connect next DALI dimmer
Short circuit for master.
Open circuit for slave.
For LED lighting
(RGB/CCT/Single color
LED light)
whi te
SR-1009FA
LED CONT RO LL ER
1234
Lea rni ng Key
Learning to sender
Power Supply
12-36VDC
LN
110V-230VAC
whi te
SR-1009FA
LED CO NTROLLER
1234
Lea rnin g Key
Wiring diagram
RGB/W or CDW LED strip
Power Supply
12-36VDC
LN
AC110-230V
V+
G-
R-
OUTPU T SIGNAL
CH1
2
DC INPU T
12/ 36VD C
V+
V-
B-
3
B-
3
W-
4
Lea rni ng
Swi tch
LED CONTR OLLER
SR-1009EA
RGB/W or CDW LED strip
ISO 900 1：2008
5

After you have wired all the receivers according to Figure illustration you need to do the following:
1. Pull off the plastic film cover of the battery at the back of remote.
2. Pair remote and receiver: short press the Learning Key on the receiver, then immediately short press the
or . Once you do that, the LED lights will blink once. Now your remote and receiver are paired! Do the same
for the other receivers if you use them, you can add as many optional receivers as you wish.
3. Press and can dim 4 zones brightness independently.
Long press : dim brightness from 0.1%-100%.
long press : dim brightness from 100%-0.1%.
and switch on/off 4 zones together.
Memory Reset:
In case you want to reset the memory of the receiver, press the learning function button for 10 seconds while
the unit is being powered. The unit will then reset to factory defaults.
Operation Safety & Warnings
Warranty Agreement
1) The product shall be installed and serviced by a qualified person.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6)
7) For update information please consult your supplier.
Please ensure that the cable is secured tightly in the connector
1) We provide lifelong technical assistance with this product:
3-year warranty. We print date on every products, for example :1125 means year 2011,week 25.The
warranty is for free repair or replacement and covers manufacturing faults only.
For faults beyond the 3-year warranty we reserve the right to charge for time and parts.
2) Limited Warrenty
Any defects caused by wrong operation.
Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and
replacement of chips.
Any damages due to transportation, vibration etc. after purchase.
Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near
harmful chemicals.
Product has been updated
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
4 zones remote
Press ON button toturn on
Press OFF button to turn off
A.Short press to turn ON/OFF
B.Long press to dim
C. 4 zones independently control