Artec Robo 2.0 User manual

Fossil Finder
K0919083614
014_en Fossil Finder
Unauthorized reproduction and distribution prohibited

2
①
②
③
④
②

３
⑤
⑥
⑦
⑧
⑤

4
⑨
⑩
⑪
⑫
⑧
④
⑦

5
⑬
⑭
⑮
⑯

６
⑬
⑭
⑮
⑯

７
⑰

８
BATT
Battery Box

9

10
Press the icon on top of your screen
to switch to fullscreen.
Press the to go to the game's start
screen.
Press the A button to start the game!
Using the Controller
Hold your controller so the pointed end
is facing the screen!
①
②
③
④
Open the sample program FossilFinder_1
on your computer or tablet and connect it
to your ArtecRobo 2.0 unit via USB or
Bluetooth to play Fossil Finder!
[Time Gauge]
Shows how much time you have left.
When it runs out, the game is over!
[Pick / Brush]
Use the pick to break through rock,
and the brush to dust dirt off fossils.
Press the B button to switch between
them!

11
Once you've uncovered a fossil, press the
B button to trade your pick for a brush, and
wave the controller as shown on the left to
brush dirt off the fossil!
Once you've completely brushed it off,
you've fully excavated the fossil!
Completing an excavation will add extra time
to your gauge! However, if you accidentally
excavate an old can instead of a fossil, you
won't earn any extra time.
If you can excavate all three fossils before
time runs out, you win!
You'll also receive a rating based on how
much time you have leftover.
The three possible ratings are Nice, Good,
and Excellent.
If you don't excavate all the fossils before
time runs out, you lose!
⑤
⑥
⑦
Swing your controller as shown on the left to
use your pick to break the rocks!
When you've dug through enough rock you'll
be able to see the fossil buried underneath!
Be careful, if you keep swinging your pick
after you uncover the fossil you'll damage the
fossil and lose time from your time gauge!
⑧
Press the A button to move to another
digging spot.
If there's something buried in your current
spot, your controller will light up red and
play the Buzzer.