Artec Robo 2.0 Fire Fighter User manual

Fire Fighter
K0919083632
032_en Fire Fighter
Unauthorized reproduction and distribution prohibited

2
①
②
③
④

３
⑥
⑦
⑧
④
③
⑥
⑤

4
⑨
⑩
⑪
⑫

5
⑬
⑭
⑮
⑯
⑬
⑭
⑫

6
⑰
⑱
⑲
⑳
⑬
⑭

7
㉑
㉒
㉓
㉔
㉑㉒

8
㉕
㉖
㉗
㉘
㉓
⑳
×4
×2

9
㉙
㉚
㉛
㉜
㉘
㉘
㉘
㉘
㉗

10
㉝
㉞

11
BATT
Battery Box

12

13
Press the icon on top of your screen
to switch to fullscreen.
Press the to go to the game's start
screen.
Press the A button to start the game!
Using the Controller
Hold the controller with both hands.
①
②
③
④
Open the sample program FireFighter_1
on your computer or tablet and connect
it to your ArtecRobo 2.0 unit via USB or
Bluetooth to play a fire-fighting game!
Press the A button repeatedly to make
the fire truck drive forward to the site
of the fire.

14
When you reach the burning building it's
time to start putting out the fire.
When you point the controller at the
screen water will shoot out of your hose.
Tilt the controller up, down, right, or left
to aim your hose at a different spot on
the building.
Dousing the flames with water will make
them shrink and then go out.
Hold down the A or B button to increase the
water pressure from your hose and douse
the flames faster. Be careful though, raising
the water pressure also makes the water
gauge (which measures how much water
you have) deplete faster! If the gauge goes
down all the way to the ✖ you'll have to
wait for the gauge to refill before you can
use your hose again.
⑤
⑥
⑦
⑧
Using the Controller
Now hold the controller so one of your
thumbs is positioned to press either the
A or B button, while the other hand holds
up the controller from beneath.
Extinguish all the fires in the building to
win the game!
As time passes, fires will get bigger and
spread to other parts of the building.
Once you've put out the fire in a room
though, that room won't catch fire again!
If the fire spreads to cover the entire
building, that's game over!