ARTHUR HOLM D1Twin User manual

User Guide
Danish craftmanship
Mediterranean soul
Technology Serving Design
D1Twin
HDCP compliant retractable double sided motorised
solutions

TABLE OF CONTENTS
REGULATIONS AND SECURITY 5
SAFETY INSTRUCTIONS 5
SYSTEM DESCRIPTION 7
PACKING INSTRUCTIONS 10
CONTROLS 11
OSD MENU 13
ISD MENU 16
INPUT CONNECTORS 22
AHnet PROTOCOL 24
VIDEO SIGNALS 28
AHLink 29
INFORMATION ON DISPOSAL 32
WARRANTY TERMS AND CONDITIONS 33

3
WELCOME
Thank you very much for purchasing an Arthur Holm product.
Please, read these installation and operating instructions carefully and
keep them in a safe place for future consultations.
We remain at your entire disposal if you have any suggestions.
Henrik Holm
General Manager
[email protected]

ABOUT US
The Company
Arthur Holm has its origins in the Danish furniture designer Jorgen Alex
Jensen, who was active during the sixties and the seventies. His design
inspiration and his concept of ergonomics have been continued by his
family, the design force behind Arthur Holm product range. The result of
combining Scandinavian design tradition with Mediterranean creativity,
exibility and emotion is a wide product range built on more than 25 years
of craftsmanship.
Arthur Holm oers a professional product range where tomorrow’s
technology is shaped into valued materials with design exibility and
customisation, specially created to enhance communication and
collaboration in reception, conference and meeting areas.
The art of customisation
Arthur Holm oers a range of ingenious products whose designs are based
on quality materials and the latest technology. Products which endow
meeting and conference rooms with silent, ergonomic, innovative and
aesthetic solutions that integrate into the furniture, hang from the walls as
works of art or are used as interactive points of information.
The world of Arthur Holm
Arthur Holm oers a selection of unique, elegant, versatile, exible and
ergonomic products that are being used in meeting and conference
rooms, reception areas, auditoriums and public zones of leading
companies throughout the world.
The numbers speak for themselves! We currently own 33 product
patents,have presence in over 45 countries with products and solutions
inmore than 25,000 installations.
It will be our pleasure to work with you, designing your unique and
personalised environment. Our broadcast electronic engineers will
provide the latest technology while our design team will oer you the most
exclusive appearance.
Our team puts its heart, passion and pride in all our designs.

5
SAFETY INSTRUCTIONS
Plugs
• Do not dismantle any part of the monitor power connector.
• Disconnect the power plug from the AC outlet when the monitor is not
going to be used for an indenite period of time.
Power and extensions cords
• Use the appropriate power cord with the correct plug type.
• Do not overload wall outlets or power cords.
• Make sure the total ampere passed through an extension cord does not
exceed the maximum allowed by the cable used.
• Do not place anything on the power cord.
• Do not locate this product where a person may walk or trip over the
cord.
REGULATIONS AND SECURITY
ATTENTION: Do not disassemble or modify the device in any way. This
symbol warns of the presence of dangerous un-insulated voltages inside
some of the components, of sucient magnitude to expose people to risk
of electronic shock.
This symbol draws attention to important use and maintenance instructions
in the manual that accompanies the unit.
This symbol indicates that the equipment conforms to the norms
established by the European Community.
This symbol indicates D.C. current.

6
Wiring connected to hazardous voltage requires installation by qualied
personnel or the use of ready-made exible cables.
For your security, your equipment must be connected to an electrical out-
let with grounding connection protection.
Since the plug is used to disconnect the device, the operating electrical
outlet must be in an easily accessible place.
Environment
• Install the equipment on an elevated, at surface.
• Install the equipment in a ventilated area.
• Avoid exposing the equipment to:
∙ Rain or water
∙ Excessive heat, cold or humidity
∙ Area exposed to direct sunlight
∙ Dirty areas
∙ Equipment generating strong magnetic elds
• Avoid placing open containers of liquid, near the equipment.
• Keep a minimum distance of 30 mm in order to have good ventilation.
• Never place above the device any sources of ames such as lighted
candles, etc.
• If you are using the device in extreme weather conditions and/or
tropical climates, the equipment should be installed in a room which
ensures a reasonable level of temperature and humidity.
• To prevent damage the equipment must be rmly anchored to the
surface, as shown on the installation instructions.
SAFETY INSTRUCTIONS

7
SYSTEM DESCRIPTION
General
Dynamic1Twin is a vertically retractable monitor with a double screen.
2 monitors are placed back to back in a compact anodised aluminium
frame to display different content for a 2 way communication. It is
designed for reception desks, information counters or meeting and
conference room tables with limited space. The screens are only visible
when required, disappearing inside the table desk when not needed by
simply pressing a button or by remote control.
Dynamic1Twin has an extremely fast lift system with a very low noise
level. Very easy to install, these monitors require no maintenance. To
protect the user, these monitors are equipped with a safety system
which stops the movements in case of resistance detection. They are
remotely controllable and diagnosable through the ERT interfaces in an
very easy and cost effective way.
Highlights
• Double sided display
• Passive cover plate
• Interactive Setup Display
• Maintenance free
• Energy saving design
• Safety system
• Serial control & Remote diagnostic
• Wireless connectivity for setup and control

8
SYSTEM DESCRIPTION
Available Models
MODEL DESCRIPTION
AH17D1HDA2F
HDCP compliant vertically retractable double Full
HD 17,3" monitor to be integrated into furniture. Solid
aluminium monitor housing in natural anodised nish
and up-table cover plate made of brushed stainless
steel. DVI-I and DVI-D inputs per each monitor (2).
Interactive Setup Display allowing the control, setup
and diagnose of the monitors. Monitors provide RS-
422 I/O allowing the remote control of movements,
speeds, safety settings, brightness, contrast and
backlight. The monitors are equipped with AH-AMMC:
an auto mechanical movement calibration system.
AH19D1HDA2F
HDCP compliant vertically retractable double Full
HD 18,5" monitor to be integrated into furniture. Solid
aluminium monitor housing in natural anodised nish
and up-table cover plate made of brushed stainless
steel. DVI-I and DVI-D inputs per each monitor (2).
Interactive Setup Display allowing the control, setup
and diagnose of the monitors. Monitors provide RS-
422 I/O allowing the remote control of movements,
speeds, safety settings, brightness, contrast and
backlight. The monitors are equipped with AH-AMMC:
an auto mechanical movement calibration system.
AH22D116A2F
HDCP compliant vertically retractable double Full
HD 21,5" monitor to be integrated into furniture.
Solid aluminium monitor housing in natural anodised
nish and up-table cover plate made of brushed
stainless steel. DVI-I and DVI-D inputs per each
monitor (2). Interactive Setup Display allowing the
control, setup and diagnose of the monitors. Monitors
provide RS-422 I/O allowing the remote control
of movements, speeds, safety settings, brightness,
contrast and backlight. The monitors are equipped
with AH-AMMC: an auto mechanical movement
calibration system.

9
Box Contents
Before the installation of your retractable monitor, please check the
contents of the shipping box, it must contain the following items:
• Monitor
• Power cord
• Remote control (1 per 5 monitors)
• Power supply 100-2 40Vac, 50-60Hz. Output 12V
• User guide
Important note: This device can only work with the power supply
included in the shipping box. This power supply can not be replaced by
any other rather than the original one.
Connections
Before connecting the power:
1. Install the unit on a table or desk, in vertical position.
2. Open the hatch and remove the two foam protection pieces.
Power connection:
1. Plug the power cable from the power supply into an AC socket of
100-240 Vac, 50-60Hz.
2. Plug the 12V D.C. cable into the socket on the unit.
Caution! Never place this monitor in horizontal position.
SYSTEM DESCRIPTION

10
PACKING INSTRUCTIONS