4ARZUM 5ARZUM
• ALWAYS unplug your appliance from outlet when not in use and
beforeputtinginortakingoffanyaccessoriesandbeforecleaningand
maintenance.
• NEVER use your appliance in wet surfaces and outside your home for
vacuuming fluids, such as water etc.
• CAUTION: Do not use your appliance for absorbing any flammable
liquidssuchasgasoline,thinner,alcohol,kerosene,etc.,aswellas
abrasive liquids (such as acids, etc.) Do not let your appliance absorb
burningcigarettes,activecigaretteashesormatchsticks.Donot
attempt to remove any sharp objects such as glasses, etc.
• Ensurenottomovetheapplianceoveritscord,whichmaydamageto
the insulation of the unit. Do not carry your appliance by its cord.
• Ifyouareindoubtthatthecordorplugisdamaged,orthatyour
device malfunctions in any manner whatsoever, including dropping
down,etc.,neverstartupyourappliance,norrepairitbyyourself.Takeit
to the nearest Arzum Authorized Service immediately.
• NEVER use your vacuum cleaner without filters, dust reservoir or dust bag.
• ContactyourArzum Authorized Service for examination, repair and
spare parts, and use original spares, accessories and dust bags only.
How to mount / remove the hose:
• Pressthebuttonsonthehoseanditsfastenednozzleandpush
forwardthemtoinsertintoitssocketlocatedin
the hose inlet of the nozzle.
• Toremovethehoserstdisconnectthe
mainsplugfromwalloutlet.Pressthelocking
buttons on the hose nozzle and pull towards
yourself.
How to mount / remove the telescopic tube
and accessories:
• Fitthetelescopictubeontothehandleatthe
end of the hose. While pressing the grey button
in the direction as shown by the arrow, adjust
the height of the telescopic tube by pushing or
takingoutit.
• Installanappropriateaccessoryontotheend
of the suction tube.
Turbo Brush
• Turbobrushhasarotarybrushdrivenbyair
flowing in the nozzle casing. By the rotating
brush the pieces is easily cleaned. The use of
the rotary brush on the turbo head increases
theeffectivenessofpickingupthebre-like
impurities from carpets and floor coverings.
• Donotkeeptheturboheadonthesamespot
for longer than necessary while vacuuming. Keep the turbo head moving
across the carpet all the time otherwise you can damage the carpet.
• Thebrushrolloritssuctioncanalmaybeblockedwithsmallpiecesof
materials, if this happens turn your vacuum cleaner off and remove the
impuritiesblockingtherollofsuctioncanal.
• NEVERtouchwhilethebrushisrotating.
• Regularlycleaningthepiecesofthreads,strings,hairsetc.isincrease
theperformanceoftheturbohead.Forcleaningit,rstlyturnyour
vacuum cleaner off and remove the turbo brush from telescopic tube
and then clean the turbo head.
• TocleantheturbobrushofArzumCleanartSilenceProEnergy;unlock
thescrewwhichplacedunderthebrushbyturningitclockwise.Then
remove the brush by hand and clean the hair that tangled. Than, replace
thebrushandlockthescrewbyturningitcounterclockwise.
• Removethecover
by pressing from
both sides of latches.
Removethehairwhich
was wrapped around
wheel.Finallyattach
thecoverbackintoit’s
own place by aligning cap to the rails on the sides.
EN