Ashland Earthmovers I-950 User manual

I-950
PARTS MANUAL
Ashland Industries Inc.
1115 Rail Drive
P.O. Box 717
Ashland, WI. 54806
Ph: 877-634-4622 Toll Free
Ph: 715-682-4622
Fx: 715-682-9717
www.ashlandind.com
Ver. 0610

ASHLAND SCRAPERS
WELCOME TO OUR NEW CUSTOMERS!
T
hank you for your purchase of an Ashland scraper and the confidence you have placed in us to
handle your earthmoving projects. Years of research, testing and successful application have
been spent to ensure quality and maximum performance for our customers. Please read and
understand this manual before attempting to attach or operate this scraper. This manual should
always remain with the machine. Be sure and fill out and send in the owners re
g
istration form at
the beginning of this manual, or you may fill out the form on-line by
g
oin
g
to ashlandind.com and
click on “Register your Machine” at the bottom of the page.
SCRAPER ID NUMBER
T
he serial number plate for the scraper is located on the ri
g
ht rear area of the scraper. The
letter and numbers stamped identify the serial number, model number and capacity of the
scraper. Please record this serial number for use in orderin
g
parts, warrantee issues and to trace
your equipment if it is ever stolen.
References to serial number breaks on parts are located in the manual with a reference sequence
of XXXXX-XXXXX. The be
g
innin
g
number records the serial number start of the use of that part.
T
he endin
g
number is the final serial number use of the part within this machine.
PHONE : [phone] Fax: [phone]
P.O. Box 717
1115 Rail Dr Ashland , WI 54806
Page #1

ASHLAND SCRAPERS
HOW TO ORDER PARTS:
IMPORTANT
Parts must be ordered through your local authorized ASHLAND dealer.
Be sure to state MODEL and SERIAL NUMBER of your machine, PART NUMBER, DESCRIPTION
and QUANTITY needed.
Unless this is done, we cannot provide prompt service or assure shipment of the correct parts.
Ashland Industries weldable replacement parts are available to rebuild, modify or update your
scraper to current factory specifications.
PHONE : [phone] Fax: [phone]
P.O. Box 717
1115 Rail Dr Ashland , WI 54806
Page #2

ASHLAND SCRAPERS
Safety Guidelines
GENERAL SAFETY GUIDELINES
Safety of the operator is one of the main concerns in designing and developing a new piece of
equipment. Designers and manufacturers build in as many safety features as possible. However, every
year many accidents occur which could have been avoided by a few seconds of thought and a more
careful approach to handling equipment. You, the operator, can avoid many accidents by observing the
following precautions in this section. To avoid personal injury, study the following precautions and insist
those working with you, or for you, follow them.
Replace any CAUTION, WARNING, DANGER or instruction safety decal that is not readable or is missing.
Location of such decals is indicated in this booklet.
Do not attempt to operate this equipment under the influence of drugs or alcohol.
Review the safety instructions in the operator’s manual with all users annually.
T
his equipment is dan
g
erous to children and persons unfamiliar with its operation. The operator should
be a responsible adult familiar with farm or construction machinery and trained in this equipment’s
operations. Do not allow persons to operate or assemble this unit until they have read this
manual and the owner’s manual and have developed a thorough understanding of the safety
precautions and how the machine works.
T
o prevent in
j
ury or death, use a tractor equipped with a Roll Over Protective System (ROPS). Do not
paint over, remove or deface any safety signs or warning decals on your equipment. Observe all safety
signs and practice the instructions on them.
Never exceed the limits of a piece of machinery. If its ability to do a
j
ob, or to do so safely, is in question
- DON’T TRY IT.
PHONE : [phone] Fax: [phone]
P.O. Box 717
1115 Rail Dr Ashland , WI 54806
Page #3

ASHLAND SCRAPERS
PHONE : [phone] Fax: [phone]
P.O. Box 717
1115 Rail Dr Ashland , WI 54806
Page #4

ASHLAND SCRAPERS
Gooseneck Frame (950)
KEY PART DESCRIPTION REMARKS
1600104 Gooseneck Frame (950)
28110 Lock washer 5/8"
37536 Nut, 5/8" NF
4A90004 Cast Socket half, rear
5A90005 Cast Socket half, front with zerk hole
6A2206 Grease Zerk, Long Shank
7AFB-00043 Bolt, 5/8" x 4 1/2" NF
8OPT-00001 Hitch Jack
9AHF-00028 Grease Fitting 90° 1/8 NPT
10 AFB-00018 Bolt: 1"NC X 3" Gr 8
11 AFW-00001 Washer 1" Flat
12 AFN-00012 Nut: 1" NC Gr 8
13 A123215-13KIT Ear Replacement Kit/Transport Lock
PHONE : [phone] Fax: [phone]
P.O. Box 717
1115 Rail Dr Ashland , WI 54806
Page #5

ASHLAND SCRAPERS
Apron (950)
KEY PART DESCRIPTION SN 950
1600125 Apron 22395-XXXXX
2A123343 Bushing: 2" OD X 1 1/2 ID X 1 3/4 L 22395-XXXXX
3A123337 Pin: 1 1/2" X 5 3/8" L 22395-XXXXX
47450 Nut: 3/8 NC
514505 Grease Fitting
6AFB-00049 Bolt: 3/8 NC X 3"
PHONE : [phone] Fax: [phone]
P.O. Box 717
1115 Rail Dr Ashland , WI 54806
Page #6

ASHLAND SCRAPERS
Bowl & Frame (950)
KEY PART DESCRIPTION SN 950 REMARKS
1A9055 Bowl and Frame
2A8062 Pin, 1-1/4" x 7"
3AFP-00001 Cotter Pin, 3/16" X 1 3/4"
4A123363 Pin: 1 1/2 X 4 1/8" Apron Cylinder Base End Pin 22395-XXXXX
5AFB-00054 Bolt: 1/2" NC X 3 1/2"
6A8056 Pin, 1-3/4" x 7-3/4"
77530 Nut: 5/8" NC
8AFN-00011 Nut: 1/2" NC
9A10168 Pin: 1/1/8" X 4 1/4"
10 A8031A Left Cutting Edge
11 A8030 Center Cutting Edge
12 A8029A Right Cutting Edge
13 PB8P-NC-063-0200 Plow Bolt, 5/8" x 2"
14 14505 Grease Fitting, 1/8 UPT
PHONE : [phone] Fax: [phone]
P.O. Box 717
1115 Rail Dr Ashland , WI 54806
Page #7

ASHLAND SCRAPERS
Push Off (950)
KEY PART DESCRIPTION REMARKS
1A10008 Shoulder Pin, 1 5/8" to 1 1/4" with zerk in threased end
2A123306 Roller, gate rear with flange type
3AFN-00024 Jam Nut, 1 1/4" NF
414505 Grease Fitting, 1/8" NPT straight
5A9056 Push Off Gate
6A9058 Dirt Shield
7AFB-00015 Bolt: 1/2" NC X 1 1/2"
88100 Lockwasher, 1/2"
9AFN-00011 Nut, 1/2" NC
10 A10164 Roller: 41/4 OD x 1 3/4 ID
11 A10163 Bushing: 1 3/4" OD X 1 1/4" ID
12 A6007A Pin: 1 1/4" X 4 1/8" Lg.
13 7036 Bolt: 1/2 NC X 2 Gr 8
14 A125020 32" Greaseline
15 A123323-40 Double Hole Tab
16 A125026 Bulkhead Nut
17 A125021 54" Greaseline
18 A125019 Grease Fitting 1/4 - 28: 54 L
19 AFP-00001 Cotter Pin: 1/4 X 3 Lg.
20 A123288 Pin: 1 1/4 X 3 1/4 Tab Head
21 8100 1/2" Lockwasher
22 7500 Nut: 1/2 NC
PHONE : [phone] Fax: [phone]
P.O. Box 717
1115 Rail Dr Ashland , WI 54806
Page #8

PHONE : [phone] Fax: [phone]
Pole & Axle Assembly (950)
KEY PART DESCRIPTION REMARKS
1A10033A Single Lip Hitch
214505 Grease Fitting, 1/8 NPT
3A9059 Pole
4AFP-00002 Cotter Pin, 3/16" X 1 3/4"
5AFN-00010 Nut, castellated, 1 1/4" NF
6A8027 Washer, special, 1 1/4" flat
7AFB-00005 Bolt, 3/4" NC X 2 1/2" L
8A40006 Ball Swivel
9A030568-01 Hitch Collar
10 600053 Pin, Swivel Hitch
11 A10033 Double Lip Clevis Hitch
12 AFW-00002 Lockwasher, 3/4"
13 A9062 Weld, Spindle Blank
14 A031076W Yoke Hitch Rebuild Kit (Containing items: 9.10,15,16,17)
15 500433 Nut: Jam
15 A123232-3 Hitch: Yoke Assembly
16 A030168-3A Swivel Yoke Assembly
17 A030568-1 Swivel Block
17 A123232-1 Hitch: Retaining Collar
18 A8020 Grease Seal (CR 35062)
19 A9061 Bearing Cone, inner
P.O. Box 717
1115 Rail Dr Ashland , WI 54806
Page #9

ASHLAND SCRAPERS
Pole & Axle Assembly (950)
KEY PART DESCRIPTION REMARKS
20 A8022 Bearing Cup, inner
21 A8023 Hub
22 A4519 Wheel Bolt, 9/16" NF
23 A8024 Bearing Cup, outer
24 A8025 Bearing Cone, outer
25 A8027 Spindle washer, special
26 AFN-00005 Spindle Nut
27 AFP-00002 Cotter Pin, 3/16" X 1 3/4"
28 A8026 Hub Cap
29 A6022A Wheel, 16.1 X 11" DC
PHONE : [phone] Fax: [phone]
P.O. Box 717
1115 Rail Dr Ashland , WI 54806
Page #10

ASHLAND SCRAPERS
Wheel - Rear (950)
KEY PART DESCRIPTION REMARKS
1A9060 Spindle, Rear with flange base plate
2A8020 Grease Seal (CR 35062)
3A9061 Bearing Cone, inner
4A8022 Bearing Cup, inner
5A8023 Hub
6A4519 Wheel Bolt, 9/16" NF
7A8024 Bearing Cup, outer
8A8025 Bearing Cone, outer
9A6022A Front Wheel 16.1 X 11" DC
9A6023 Rear Wheel 24" x 15"
10 A8026 Hub Cap
11 AFP-00002 Cotter Pin, 3/16" x 1-3/4"
12 AFN-00005 Spindle Nut
13 A8027 Spindle washer, special
14 AFP-00001 Bolt, 1" NC x 6-1/2" long
15 AFN-00012 Nut, 1" NC
16 AFW-00001 Flat Washer, 1"
PHONE : [phone] Fax: [phone]
P.O. Box 717
1115 Rail Dr Ashland , WI 54806
Page #11

ASHLAND SCRAPERS
Cylinder - Lift (#A416H118) 4" X 16"
KEY PART DESCRIPTION REMARKS
1A45H04 Barrel Assembly
2A300H11 Head Gland
3A300H13 Head Cap
4A22H18 Capscrew, 1/4" x 1"
5AFP-00003 Cotter Pin, 3/16" X 1 1/2"
6A300H03 Piston Nut
7A300H07 Piston, 4"
8A45H03-118 Shaft, 1-1/2" diameter
9A45003 Pin, 1-1/8" x 3-1/4"
10 A10168 Pin, 1-1/8" x 4-1/4"
11 14505 Grease Fitting
A300H14B Cylinder Seal Kit ,containing: (a-g)
a O-ring, 4" OD x 3/16"
b Retainer Ring
c O-Ring 1 1/2" ID X 1/8"
d Backup Washer
e Wiper Seal
f Backup Washer, 4" OD
g Cast Iron Ring
PHONE : [phone] Fax: [phone]
P.O. Box 717
1115 Rail Dr Ashland , WI 54806
Page #12

ASHLAND SCRAPERS
Cylinder - Apron (#A125050) 4" X 13"
KEY PART DESCRIPTION SN 950 REMARKS
A125050 Apron Cylinder 22395-XXXXX
1A125050-01 Rod 1-3/4” with welded eye
2A125050-02 Piston
3A125050-03 Gland, Threaded
4A125050-04 Lock Nut, 1-1/8” NF
5A123351 Pin Keeper Bushing
6AFB-00019 1/2" x 1 1/2" Gr 8 Bolt
7A123362 Pin: Cyl. Rod End 1 1/2 X 4 1/2 w/ Tab
8A123363 Pin: Cyl. Base End 1 1/2 X 4 1/8"
9A125050-06 Cylinder Barrel
10 8602 Cotter Pin: 1/4 X 2
A125050-05 Seal Kit Containing (a-f)
a Nylon Wear Ring
b FSP Seal
c O-Ring
d Backup Washer
e Hallite Rod Seal
f Snap in Rod Wiper
PHONE : [phone] Fax: [phone]
P.O. Box 717
1115 Rail Dr Ashland , WI 54806
Page #13

ASHLAND SCRAPERS
Cylinder - Push Off (#A125111) 4" x 50"
KEY PART DESCRIPTION SN 950 REMARKS
100 A125111 Push Off Cylinder 21266-XXXXX
1A123424 Barrel Assembly
2A123425 Head Gland
3A123426 Collar
4A8062 Pin, 1-1/4" x 7"
6A400H17 Piston Nut, 1-1/4" NF
6A80H27 Piston
7A90H26 Rod Assembly
8A8061 Pin, 1-1/4" x 4-3/4"
98602 Cotter Pin, 1/4" x 2"
A80H30 Seal Kit Containing (a-f)
a O-ring, 4" OD x 1/8"
b Seal: U-Cup
c Wiper Seal, 2" ID
d Cast Iron Ring, 4" OD
e Backup Washer, 4" OD
f O-ring, 4" OD x 3/16"
PHONE : [phone] Fax: [phone]
P.O. Box 717
1115 Rail Dr Ashland , WI 54806
Page #14

ASHLAND SCRAPERS
Parts - Hydraulic Manifold (#A125174)
KEY PART DESCRIPTION
1A125162-02 Pushoff Sequence Cartridge
2A125162-01 Counter Balance Cartridge
SETTING THE APRON AND PUSHOFF VALVE
The manifold block containing the pushoff sequence valve cartridge and apron sequence valve
cartridge is used to control two hydraulic circuits with one hydraulic remote. When the tractor hydraulic
remote is activated, oil flows first to the apron cylinders until they are fully extended. Once the cylinders
are fully extended, the apron circuits’ hydraulic pressure be
g
ins to increase. Once the pressure threshold
is surpassed (which is adjustable. See adjustment section), the sequence valve diverts the oil flow to the
pushoff’s hydraulic circuit. Once the push off is completely extended the operator then reverses the
tractors hydraulic remote. The counterbalance valve will hold the apron open until the push off is fully
retracted. The Apron sequence valve then opens and allows the apron to close.
Setting the valves:
STEP 1 PUSHOFF SEQUENCE VALVE
Loosen the lock nut (9/16”) on the sequence valve cartrid
g
e. Turn the setscrew (4mm) clockwise
until the front apron rises before the push-off begins to advance. (Earthmover should be empty) Turn
the adjustment screw an additional 1/4 turn clockwise and tighten jam nut.
STEP 2 COUNTER BALANCE VALVE
Loosen the lock nut (9/16”) on the counterbalance valve cartridge. Turn the setscrew (4mm)
counter-clockwise until the apron holds in a raised position while rear gate is being retracted. Turn
adjustment screw an additional 1/4 turn, tighten jam nut. DO NOT tighten adjusting screw more than
necessary.
PHONE : [phone] Fax: [phone]
P.O. Box 717
1115 Rail Dr Ashland , WI 54806
Page #15

ASHLAND SCRAPERS
Hydraulic Valve Ports
KEY PART DESCRIPTION REMARKS
A Supply Line
B Pushoff Cyl. (Rod End)-Apron Cyl., Right side (Rod end)-Supply
Line
C Pushoff Cylinder, (Base End)
D Apron Cylinder, Right side, (Base End)
E Apron Cylinder, Left side, (Rod End)
F Apron Cylinder, Left side, (Base End)
CBGB Counterbalance Valve, adjustable
SCGA Sequence Valve, adjustable
GA Pressure test port
GB Pressure test port
PHONE : [phone] Fax: [phone]
P.O. Box 717
1115 Rail Dr Ashland , WI 54806
Page #16

ASHLAND SCRAPERS
Hydraulic Valve Seals
KEY PART DESCRIPTION REMARKS
1AHA-00076 Adapter: Str. Swiv 1/2 MP X 1/2 FP, 109 Rest.
2AHA-00043 Adapter: Str. Sw. 1 1/16 M ORB X 1/2 FP
3AHA-00048 Adapter: 90 Deg. Swiv. 1 1/6 M ORB X 1/2 FP
4AHA-00046 6 ORB Plug
5AHS-00153 O-Ring for 12 M ORB Fitting
6AHA-00047 Adapter: 90 Deg. XL 3/4 MJX 1 1/6 M ORB
7AHA-00044 Adapter: 90 Deg. 3/4 MJ X 1 1/6 M ORB
8A125162-02 Valve: Sequence Cartridge for Ver. III & IV
9A125174 Valve: Manifold Block IV Body
10 A125162-01 Valve: Counterbalance Cartridge for Ver. III & IV
A125162-01 KIT Seal Kit for A125162-01 Valve Cartridge
A125162-02 KIT Seal Kit for A125162-02 Valve Cartridge
PHONE : [phone] Fax: [phone]
P.O. Box 717
1115 Rail Dr Ashland , WI 54806
Page #17

ASHLAND SCRAPERS
Parts - Hydraulic Plumbing Front (950)
KEY PART DESCRIPTION REMARKS
1AHA-00019 Adapter: 90 Deg. 3/4 MJ X 3/4 MJ
2AHA-00022 Adapter: T 3/4 MJ X 3/4 MJ X 3/4 MJ
3A125063 Tube Assembly: 3/4" X 32 3/4"
4A125064 Tube Assembly: 3/4" X 30 1/2"
5A125272 Tube Assembly: I-900 Left Front Arm
6A125273 Tube Assembly: I-900 Right Front Arm
PHONE : [phone] Fax: [phone]
P.O. Box 717
1115 Rail Dr Ashland , WI 54806
Page #18

ASHLAND SCRAPERS
Parts - Hydraulic Plumbing Rear ((950)
KEY PART DESCRIPTION SN 950 REMARKS
1AHA-00022 Adapter: T 3/4 MJ X 3/4 MJ X 3/4 MJ
2AHA-00049 Adapter: T 3/4 MJ X 3/4 MJ X 3/4 FJ Swiv.
3AHA-00019 Adapter: 90 Deg. 3/4 MJ X 3/4 MJ
4AHA-00006 Adapter: Str. 3/4 MJ X 3/4 MP
5A125323 Tube Assy: 950 Right Side Lower Pipe 22395-XXXXX
6A125322 Tube Assy: 950 Rear Back Pipe 22395-XXXXX
7A155-H21 Tube Assy:
8A125183 Tube Assy:
10 A125184 Tube Assy:
9AHV-00001 Valve: Pressure Relief (in-line)
PHONE : [phone] Fax: [phone]
P.O. Box 717
1115 Rail Dr Ashland , WI 54806
Page #19