fantastic furniture ZARA 1STR Datasheet

Assembly lnstructions
ZARA
Chair 1STR
Ver1.4

Page 2
2
3
56
Read Instructions carefully.
Lay out all of the components on a soft surface
as if you were preparing to do a jigsaw puzzle.
Carefully identify each component, especially
those that are similar. The most common mistake
is getting things back to front.
Separate and identify each component from the
hardware pack and rest each one in its proper
DO NOT set glue until you are certain that the
parts belong together.
W
A
R
N
N
G
WARNING
Check no parts are missing.
4
fully tighten screws（leave sightly
loose.When the item is fully assembled
tighten the srews - but do not over tighten.
FAILURE TO FOLLOW THESE BASIC STEPS CAN LEAD TO DAMAGE
THAT IS NOT COVERED BY YOUR WARRANTY

(not provided)
Phillips Head Srewdriver
What you Need
1x Allen Key
Backrest
(P1)
Left Leg
(P3)
(H1)
Right Leg
(P2)
Backrest
(P1)
Seat
(P5)
Front Rail
(P4)
Left Leg
(P3)
Right Leg
(P2)
Attach Backrest (P1) to Right Leg (P2) and Left Leg (P3) with 4x Short Screws (H1)
using allen key provided. Do not tighten.
Step 1
4 x Short
screws
(H1)
You will need:
Please make sure you have all these parts before you start.
To Assemble the Body
2x Long screws 4x Short screws
4x Self-Tapping screws
(H1) (H2)
(H3)
Page 3

Page4
Seat
Seat
Seat frame
(P5)
Step 3
4 x Self-Tapping
screws
(H3)
(H3)
You will need:
Attach Front Rail (P4) to Right Leg (P2) and Left Leg (P3) with
2 x Long Screws (H2) using allen key provided. Do not tighten.
Attach Seat (P5) with 4 x Self-tapping Screws (H2) using Phillips head screwdriver.
Carefully position seat as shown. Note: there are no pre-drilled holes in the seat.
Step 2
2x Long
screws
(H2)
(H2)
(H2)
You will need:
Front Rail
(P4)
note: The Front Rail (P4) must
be positioned as shown
VIEW FROM ABOVE WHEN
CHAIR IS UPSIDE DOWN
this distance approx 5cm

Page5
Apply downward pressure on the seat pad to ensure chair is level whilst tightening bolts.
Tighten firmly with Allen key provided.
Step 4
The job is now complete!
In the interest of our environment please
dispose of all packaging thoughtfully.