Assa Abloy Sargent P106 User manual

1-800-727-5477 • www.sargentlock.com
Installation Instructions
Copyright © 2023, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express written
permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
WARNING
This product can expose you to
lead which is known to the state of
California to cause cancer and birth
defects or other reproductive harm.
For more information go to www.
P65warnings.ca.gov.
Attention Installer: Improper
installation may result in damage
to the product and void the factory
warranty.
WARNING
A8309 -1 05/23
Auxiliary control with Concealed Vertical Rod Exit Devices
P106, P113, WD-P106 & WD-P113
39 5/8”
PE8400, 12-MD-PE8400,
MD-PE8600 & 12-MD-PE8600
EXIT DEVICE X P100 SERIES
AUXILIARY CONTROL
WD-PE8600 & 12-WD-PE8600
EXIT DEVICE X WD-P100 SERIES
AUXILIARY CONTROL

2
1-800-727-5477 • www.sargentlock.com
Copyright © 2023, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without
the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent
www.assaabloydss.com/patents.
P106, P113, WD-P106 & WD-P113
Installation Instructions
Auxiliary Control with Concealed Vertical Rod Exit Devices
A8309-1 5/23
ab
Screw the #10-32 X 2” fastener to the auxiliary control
link that was placed in the door from step a.
Auxiliary
control link
Using the exit device instructions, prepare the door for the exit device.
1
Prepare the door for auxiliary control as illustrated on page 1.
2
For wood doors, follow steps to install the auxiliary control bracket.
3
Feed the auxiliary control link up and through the
exit device side of the door.

3
1-800-727-5477 • www.sargentlock.com
Copyright © 2023, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without
the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent
www.assaabloydss.com/patents.
A8309-1 5/23
P106, P113, WD-P106 & WD-P113
Installation Instructions
Auxiliary Control with Concealed Vertical Rod Exit Devices
c d
Holding the #10-32 fastener, take the platform and
the smaller screw and attach it to the upper hole on
the link in the door. Remove the #10-32 X 2”
fastener.
Take the inner chassis and place it into the opening.

4
1-800-727-5477 • www.sargentlock.com
Copyright © 2023, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without
the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent
www.assaabloydss.com/patents.
P106, P113, WD-P106 & WD-P113
Installation Instructions
Auxiliary Control with Concealed Vertical Rod Exit Devices
A8309-1 5/23
f
Mark the inner chassis mounting holes.
e
Hook the inner chassis into the link.

5
1-800-727-5477 • www.sargentlock.com
Copyright © 2023, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without
the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent
www.assaabloydss.com/patents.
A8309-1 5/23
P106, P113, WD-P106 & WD-P113
Installation Instructions
Auxiliary Control with Concealed Vertical Rod Exit Devices
g
Remove the inner chassis.
h
Pre-drill the holes in the door with a 1/8” drill bit.

6
1-800-727-5477 • www.sargentlock.com
Copyright © 2023, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without
the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent
www.assaabloydss.com/patents.
P106, P113, WD-P106 & WD-P113
Installation Instructions
Auxiliary Control with Concealed Vertical Rod Exit Devices
A8309-1 5/23
j
Secure the inner chassis with two screws.
i
Rehook the inner chassis into the link and then
insert the inner chassis back into the door.

7
1-800-727-5477 • www.sargentlock.com
Copyright © 2023, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without
the express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent
www.assaabloydss.com/patents.
A8309-1 5/23
P106, P113, WD-P106 & WD-P113
Installation Instructions
Auxiliary Control with Concealed Vertical Rod Exit Devices
k
Confirm installation is as shown.

1-800-727-5477 • www.sargentlock.com
Copyright © 2023, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express written
permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents. A8309-1 5/23
Using exit device instructions, mount exit device to the door.
4
Mount auxiliary control to door.
5
BREAK OFF POINTS (IF NEEDED)
1. USED FOR SARGENT P-106 AND WD-P106 FUNCTION.
2. USED ON 51-P106 FUNCTION, 82-P106 AND 83-P106
PREFIX (OLD STYLE REMOVEABLE CORE).
3. USED ON SARGENT P-113 AND WD-113 FUNCTION, ALL
CYLINDERS.
4. USE AS IS FOR 70-P106, 70-WD-P106, 72-P106, 72-
WD-P106, 73-P106, AND 73-WD-P106 BEST CYLINDER
FUNCTIONS. SCHLAGE CYLINDER SIZE #41.