AT&T 9312 User manual

900 MHz Two-Line Cordless
Speakerphone 9312
Please also read
Part 1 — Important
Product Information
USER’S MANUAL
Part 2
AT&T and the globe symbol are registered trademarks ofAT&T Corp.licensed toAdvancedAmericanTelephones.

© 2000AdvancedAmericanTelephones. All rights reserved.
Printed in China. 850004334 Issue 1AT&T 8/00

CONTENTS
1
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . 3
BeforeYou Begin........................... 3
Table/Desk Installation...................5
Wall Installation ............................ 6
TELEPHONE OPERATION
AT THE HANDSET . . . . . . . . . . . . . . . . . . . . . . . 9
Make a Call.................................... 9
Answer a Call................................ 9
End a Call.......................................9
Flash/CallWaiting.......................... 9
Change Channel............................ 9
Redial ............................................ 9
Hold .............................................. 9
HandsetVolume............................ 9
TemporaryTone Dialing.............. 10
Handset Ringer Style................... 10
Ringer Off ................................... 10
Intercom Calls............................. 11
Conference Calls......................... 11
Switching from Handset to
Base Speakerphone ................. 12
Headset Jack................................ 12
Operating Range......................... 13
TELEPHONE OPERATION
AT THE BASE . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Make orAnswer a Call................ 14
Flash/CallWaiting........................ 14
Mute............................................ 14
End a Call.................................... 15
Base RingerVolume..................... 15
Redial .......................................... 15
Hold ............................................ 15
SpeakerphoneVolume................ 15
Intercom Calls............................. 16
Switching from Base
Speakerphone to Handset....... 16
TELEPHONE MEMORY . . . . . . . . . 17
Store Memory Numbers.............. 17
Store a Pause in a
Memory Number..................... 17
Change/Replace a
Stored Memory Number.......... 17
Dial Memory Numbers ............... 17
BATTERIES . . . . . . . . . . . . . . . . . . . . . . . . . 18
Charging the Handset
Battery Pack............................. 18
Replacing the Handset
Battery Pack............................. 19
Spare Battery Charger..................20
IN CASE OF DIFFICULTY . . . . . . 21

Before You Install
1Choose a location for the base near an electrical outlet and a
telephone jack.
This phone requires a modular telephone jack and a standard electrical
outlet (110vAC) not controlled by a wall switch.
2Install the handset battery.
INSTALLATION
3
b) Plug battery
pack connector
into handset.
d) Replace cover by
sliding it up into
place.
a) Remove battery
compartment
cover by pressing
on the indentation
and sliding downward.
c) Place battery pack
and wires in
compartment.