ATD Tools ATD-2102 User manual

For your own safety, please read the operating instructions carefully before using your
ATD2102 air impact ratchet.
1. Maintain proper incoming air pressure, 90 PSI (6.3 kg/cm2), at all times in order to
maintain your safety and prolong the use of the tool.
2. Don’t wear loose or baggy clothing when you operate this tool. Remove anything that
may cause injury, i.e. neckties, jewelry, etc. Tie back long hair and ALWAYS wear eye
protection
3. It is the owner’s responsibility to lubricate the air tool properly. Don’t use any flammable
or volatile oils for lubricating, i.e. diesel oil, kerosene or gasoline
4. Make sure to use quality impact sockets only, don’t use hand tool sockets. Cracking
sockets will reduce the torque of the air tool and may cause serious injury.
5. Don’t depress trigger when connecting the air supply hose.
6. Protect the air lines from damage or puncture
7. Never point an air tool at anyone, or at yourself. It could cause serious injury.
8. Keep all nuts, bolts and screws tight and ensure equipment is in safe working condition
before each use.

ITEM# ORDERING PART# PART DESCRIPTION ITEM# ORDERING PART# PART DESCRIPTION
1 PRT2102-01 HAMMER CASE 24 PRT2102-24 WASHER
2 PRT2102-02 GREASE FITTING 25 PRT2102-25 AIR CHANNEL GASKET
3 PRT2102-03 ANVIL BUSHING 26 PRT2102-26 MOTOR HOUSING
4 PRT2102-04 FRONT GASKET 27D PRT2102-27 TRIGGER
5 PRT2102-05 ANVIL COLLAR 28 PRT2102-28 O-RING
6 PRT2102-06 O-RING 29 PRT2102-29 SPRING PIN
7 PRT2102-07A ANVIL 30 PRT2102-30 SCREW
7 PRT2102-07B 2” ANVIL 31 PRT2102-31 SPRING PIN
8 PRT2102-08 HAMMER PIN 32 PRT2102-32 BUSHING
9 PRT2102-09 HAMMER 33 PRT2102-33 VALVE STEM
10 PRT2102-10 HAMMER CAGE 34 PRT2102-34 SPRING
11 PRT2102-11 REAR WASHER 35 PRT2102-35 EXHAUST DEFLECTOR
12 PRT2102-12 BALL BEARING 36 PRT2102-36 O-RING
13 PRT2102-13 FRONT END PLATE 36B PRT2102-36B O-RING
14 PRT2102-14 ROTOR 37 PRT2102-37 WASHER
15 PRT2102-15 ROTOR BLADE 38 PRT2102-38 AIR INLET (1/4” PF)
16D PRT2102-16 CYLINDER 39 PRT2102-39 O-RING
17 PRT2102-17 VALVE SLEEVE 40 PRT2102-40 VALVE SLEEVE GASKET
18 PRT2102-18 BALL BEARING 41B PRT2102-41 INSERTS RECOIL
19 PRT2102-19 SPRING PIN 42B PRT2102-42 O-RING
20 PRT2102-20 REVERSE VALVE 43D PRT2102-43 SQUARE RING
21C PRT2102-21 SPRING
*
PRT2102-SK SEAL KIT
22 PRT2102-22 STEEL BALL
*
PRT2102-HK HARD KIT
23 PRT2102-23 REAR GASKET
PRT2102-SK CONTAINS ITEMS:
4, 15(X6), 20, 21C, 23, 28, 33, 34, 36, 36B, 39 & 42B
PRT2102-HK CONTAINS ITEMS:
5, 6, 8(X2), 9(X2) & 10