ATIGO A1001 User manual

A1001
2-WireAudio Receiver
User Manual

2
Contents
Audio Receiver A1001........................................................................................................................... 3
Key functions.........................................................................................................................................3
Specification..........................................................................................................................................3
Terminaldescription..............................................................................................................................3
Handset Mounting.................................................................................................................................4
Operation Instructions...........................................................................................................................5
Door release......................................................................................................................................5
Intercomcall......................................................................................................................................5
Doorbell button..................................................................................................................................5
Setup Instructions..............................................................................................................................5
Secondary Address Settings.................................................................................................................6
Volume Settings....................................................................................................................................6
Ring Tone Settings................................................................................................................................6

3
Audio Receiver A1001
Key functions
Receptoris pickedup to answer the visitor
calls.
Unlockbutton isused toreleasethedoor
lock whenpressed.
Call button / Unlock 2nd buttonis usedto
make a intercomcall to another handset
when in standbymode.Duringan activecallit
can beused to releaseasecondarydoorlike
a back entranceoragate.
Speakeris used to hear the caller.
Specification:
Power supply: 24Vdc(suppliedby A2100)
Power consumption: 2.1mAstandby
75.9mA active
Wiring:two wires,non-polarised
Dimension:187(H) x 97(W)x33(D)mm
Terminal description
The audiodoor entryhandset is configuredby
six DIPswitches markedas DIP1.
TheDIPswitchescanbemodifiedbeforeor
after installation.Restartingtheunit is
necessary whenever the DIPswitcheshave
been modified.
DIP1 switches1to 6 arefor setting theaudio
handsetuser code.
DIP2 switches1 to 3 areused to setthe
audio handsetas secondaryor extended.
SW+, SW- is used to connectan external
doorbellbutton.
L1,L2 is used to connecttheBUSwires.
K3 is used to setthevolumesetting.
K4 is used to settheringtone.
OFF Programmingmodedisabled.

4
Handset Mounting
Makesurethecableis passedthroughthe
wall bracket.
1. Fix thewall bracketto thewallatthe
appropriateheightusingtwoscrews.
2. Connectthewiresto theBUSconnector
correctly
3. Connecttheconnectorto theaudio
handset
4. Attach theaudiohandsetto thewall
bracket
Recommendedheightinstallationis1.60m
fromthegroundto themiddleofcentreofthe
handset.

5
Operation Instructions
Doorrelease
When a visitor pushesthe call buttonfrom the
entry panel, theaudio receiver willstart
ringing.Toanswer thecall upthe receptorto
talk.Press theunlockbutton to releasethe
primary door. Ifthecall comesfroma
secondaryentrance,press unlock 2nd button.
Check withyour installer if the lock iselectric
and ifitcan connectto thesystem.
Intercom call
Whileinstandby,pickupthehandsetand
press thecallbuttontoactivatetheintercom
Doorbellbutton
A doorbellbuttoncanbeconnectedto the
receiver.Visitorscanringdoorbell whenthey
areat thedoor.
Setup Instructions
On theAtigosystemeveryapartmentmust
haveauniqueidentificationvalue,oruser
code.
DIP1 switches 1to 5 areused to settheuser
codeaccordingto belowtable.Thepossible
valuesarebetween 1and 32differentcodes
for 32 apartments.
DIP1 switch 6 is used to matchavideo
monitor whentheaudiohandset is usedona
video system.

6
Secondary Address Settings
When usingmultipleaudioreceiversin the
sameapartment,thereceiversmustbesetto
the sameuser code andthe Primary/
Secondarytypeshouldbeadjustedto ON
accordinglyonthereceivers.
To programweuseDIP2switches as follows
DIP2 switches 1and 2 are used to setthe
Primary /Secondary address orextended
address
DIP2 switch 3 is notused
Useadjacenttableto setup to three
additional receivers.
Volume Settings
There arethreevolumeranges tochoose from
- lowvolumerange
- mid volumerange
- highvolumerange
Pick up thereceptor andthenpressK3button to cyclethrougheach ofthethreevolumeranges.
Hang up thereceptorto exitvolumesettings.
Ring Tone Settings
There are four groupsofringtonesto choosefromas shown in thetable below

7
To changetheringtone,whileinStandbymode,pickthehandsetup andpressK4 button to cycle
througheachgroupofringtones.
Hang up receptorto exitringtonesettings.

8