Atlantic Furniture PORTLAND User manual

ASSEMBLY INSTRUCTIONS
Before assembling your headboard, please read through these
instructions carefully and familiarize yourself with the different parts.
PORTLAND BED WITH MATCHING FOOTBOARD
Page 1 of 2
BACK VIEW
Step 1
Step 2
1
2
3
B
B
B
B
B
C
C
C
C
Instructions apply for bed sizes
TWIN > FULL
PARTS LIST HARDWARE
Split washer - 4 pcs
Flat washer - 4 pcs
JCB M6 X 25mm (1”) - 4 pcs
HARDWARE FOR METAL BED FRAME
Spare - 1 pc
Spare - 1 pc
Spare - 1 pc
JCB M6 X 70mm (2 3/4”) - 4 pcs
Spare - 1 pc
B
A
C
D
G
F
E
HAllen wrench - 1pc
Spare - 1pc
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at [email protected] or 1-800-955-3726
Barrel nut - 4 pcs
Wooden dowel - 4 pcs Wood screw - 4 pcs
Spare - 1 pc
Spare - 1 pc Spare - 1 pc
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
READY
ASSEMBLE
TO
Attach the legs (2) and (3) to the headboard panel (1),
using JCB (B) and barrel nut (C). Tighten with the
Allen wrench (H).
1
5
5
Remove packing stick (5) from headboard panel (1) and . Insert wooden dowels (A)DISCARD
to the locator holes on spacer block (4). Attach the spacer blocks (4) to the legs (2) and (3), using
wood screws (D), as shown below. Tighten with Phillips screwdriver. (customer supplied)
44
4
2
3
D
D
A
HEADBOARD PANEL 1 PC
1
2
3
5
4
1 PC
1 PC
2 PCS
2 PCS
LEFT LEG
RIGHT LEG
PACKING STICK
SPACER BLOCK
PO :
Adult assembly
Congratulations!
Your headboard is now assembled.
To ensure lasting safety, we recommend that you periodically check
that all screws are tight and all parts are secure.

Page 2 of 2
01
02
03
04
HARDWARE
HEADBOARD
FOOTBOARD
SIDE RAILS
BOX 1
BOX 2
04
04
04
02
03
Attach the side rails (04) to the headboard (02) and footboard (03) using the bed hook as shown below.
Step 1
Use the upper set of pins when
using mattress only, storage drawers
or Trundle bed. Use the lower set of
pins if using foundation and mattress.
READY
ASSEMBLE
TO
Adult assembly
Adult assembly
Step 2
UPPER
LOWER
PLATFORM BED - TALL HEIGHT TRADITIONAL BED - LOW HEIGHT
Lastly, lay slat kit or foundation support board onto the bed. For assembly, follow the assembly
instructions included with support system.
PORTLAND BED WITH MATCHING FOOTBOARD