Atlantic Furniture LEXI User manual

Page 1 of 3
Adult Assembly
ASSEMBLY INSTRUCTIONS
Before assembling your Printer stand, please read through these
STAND CHARGING STATION
Hexagon Wrench
AE
D
BF
C
Flat washer - 8 pcs Wooden Dowel 3/8 X 1 1/4” - 4 pcs
Wooden Dowel 1/4” X 1 1/4” - 4 pcs
Spare - 2 pcs Spare - 1 pc
Spare - 1 pc
Hexagon nut - 8 pcs Wood Screw - 6 pcs
Spare - 2 pcs Spare - 1 pc
Hexagon wrench - 1 pc
NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE HEXAGON NUT, WASHER, WOODEN DOWEL,
OR WOOD SCREW ARE DAMAGED DURING ASSEMBLY.
PARTS LIST
01
02
03
04
TOP PANEL 1 PC
4 PCS
2 PCS
1 PC
LEG
SIDE PANEL
LOWER SHELF
01
02
02
02
02
04
03
03
instructions carefully and familiarize yourself with the different parts.
READY
ASSEMBLE
TO
STAND CHARGING STATION

F
note: panel in center
Page 2 of 3
Adult Assembly
Adult Assembly
Install wooden dowels (D) and (E) into the locator
holes on (03) and (04) as shown below.
Repeat with the other panel.
Attach first side panel (03) to printer stand aligning
the dowels (D) with the holes in the apron. Be sure
the panel is centered before tightening
the wood screw (F).
E
F
E
E
E
D
D
02
03 04
03
02
02
02
01
A
B
02
A
B
AA
B
B
STEP 1
STEP 2 STEP 3
Attach the legs (02) to the top panel (01) using flat washers (A) and hexagon nuts (B), tighten with
hexagon wrench (C), as shown below.
D
D
STAND CHARGING STATION

Attach second side panel (03) the same as the first but place the lower shelf (04) in position by
aligning the wooden dowels (E) with the holes in the side panel.
Apply presure to eliminate any gap between the lower shelf and the side panel
and fix in place using wood screw (F).
E
E
F
F
F
F
F
Page 3 of 3
Adult Assembly
Adult Assembly
04
03
Congratulations!
Your Printer stand is now ready for use.
STEP 4
STEP 5
To ensure lasting safety, we recommend that you periodically check
that all screws are tight and all parts are secure.
STAND CHARGING STATION