Atlantic Furniture URBAN LIFESTYLE BED DRAWER User manual

READY
ASSEMBLY INSTRUCTIONS
Before assembling your bed drawer, please read through these
instructions carefully, familiarize yourself with the different parts.
URBAN LIFESTYLE BED DRAWER
Page 1 of 2
HARDWARE
A B
JCB M6 X 1 1/8”( 30mm ) - 16 pcs
Spare - 2 pcs
E
Allen wrench - 1 pc
Spare - 1 pc
Allen wrench
NOTE : WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at [email protected] or 1-800-955-3726
PO :
Adult assembly
Adult assembly
PARTS LIST
01
02
03
HARDWARE 1 BOX
2 PCS
4 PCS
DRAWER FACE
DRAWER SIDE
04
05
2 PCS
2 PCS
DRAWER BACK
DRAWER BOTTOM
01
04
02
03
03
05
Step 1
Lay the drawer face (02) on smooth, flat surface so the groove is facing upwards. Fit the drawer
side (03) to drawer face (02), Use JCB M6 X 1” (A), align groove inside panel with groove in
drawer face. Tighten with Allen wrench (B).
02
03
03
A
A
A
B
JCB M6 X 1 1/8”
Allen wrench

Adult assembly
Adult assembly
Page 2 of 2
URBAN LIFESTYLE BED DRAWER
05
Guide the drawer bottom (05) in carefully so
that it won’t jump out of its grooves. Be sure it
fits fully into its groove at the bottom
(in the drawer face) before fitting the drawer back.
Attach drawer back (04) to bed drawer
assembly as shown. Use JCB M6 X 1”(A).
Tighten with Allen wrench (B).
04
A
B
JCB M6 X 1 1/8”
Allen wrench
A
A
Step 2 Step 3
Congratulations!
Your Urban lifestyle bed drawers are now ready for use.
We recommend that you recheck that all screws are tight