Atlantic Furniture MISSION AH11214 User manual

READY
Page 1 of 3
ASSEMBLY INSTRUCTIONS
Before assembling your Work table, please read through these
instructions carefully. Familiarize yourself with the different parts.
MISSION WORK TABLE
Hexagon Wrench
A D
B E
C
Flat washer - 8 pcs Wooden Dowel - 4 pcs
Spare - 2 pcs Spare - 1 pc
Hexagon nut - 8 pcs Wood Screw - 4 pcs
Spare - 2 pcs Spare - 1 pc
Hexagon wrench - 1 pc
PARTS LIST
01
02
03
TOP PANEL 1 PC
4 PCS
2 PCS
LEG
SIDE PANEL
01 02 03
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at [email protected] or 1-800-955-3726
Adult assemblyAdult assembly
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.

Page 2 of 3
Attach the legs (02) to the top panel (01) as shown below using flat washers (A)
and hexagon nuts (B), tighten with hexagon wrench (C).
02 02
02
02
01
A
B
02
A
B
A
A
B
B
Flat Washer Hexagon Nut
A B
Adult assemblyAdult assembly
Adult assemblyAdult assembly
Step 1
MISSION WORK TABLE

03
D
D
Install wooden dowels (D) into the locator
holes on (03) as shown below.
Repeat with the other panel.
Wooden dowel
Wood screw
03
03
D
E
E
E
note : panel in center
Attach side panels (03) to work table aligning the
dowels (D) with the holes in the apron.
Be sure the panel is centered before
tightening the wood screw (E).
D
D
E
Congratulations!
Your work table is now ready for use.
Page 3 of 3
We recommend that you recheck that all screws are tight,
and that all parts are secure before use and periodically to ensure lasting Safety.
MISSION WORK TABLE
Step 2
Step 3
Adult assemblyAdult assembly