Atlantic Furniture Mission Printer Stand With Shelf AH10224 User manual

READY
Page 1 of 3
ASSEMBLY INSTRUCTIONS
Before assembling your printer stand, please read through these
instructions carefully and familiarize yourself with the different parts.
MISSION PRINTER STAND WITH SHELF
Hexagon wrench
A E
D
BF
C
Flat washer - 8 pcs Wooden Dowel 3/8 X 1 1/4” - 4 pcs
Wooden Dowel 1/4” X 1 1/4” - 4 pcs
Spare - 2 pcs Spare - 1 pc
Spare - 1 pc
Hexagon Nut - 8 pcs Wood Screw - 6 pcs
Spare - 2 pcs Spare - 1 pc
Hexagon Wrench - 1 pc
PARTS LIST
01
02
03
04
TOP PANEL 1 PC
4 PCS
2 PCS
1 PC
LEG
SIDE PANEL
LOWER SHELF
01
02 04
03
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at
[email protected]
or 1-800-955-3726
PO :
Adult assemblyAdult assembly
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.

Page 2 of 3
Install wooden dowels (D)(E) into the locator
holes on (03)(04) as shown below.
Repeat with the other panel.
Attach first side panel (03) to printer stand
aligning the dowels (D) with the holes in the
apron. Be sure the panel is centered before
tightening the wood screw (F).
E
F
E
E
E
D
D
F
note : panel in center
02
03 04
03
02
02
02
01
A
B
02
A
B
AA
B
B
STEP 2 STEP 3
Attach the legs (02) to the top panel (01) as shown below using flat washers (A) and
hexagon nuts (B), tighten with hexagon wrench (C).
D
MISSION PRINTER STAND WITH SHELF
Step 1
Adult assembly
Adult assembly
Adult assembly
Adult assembly

Attach second side panel (03) the same as the first, but place the lower shelf (04)
in position by aligning the wooden dowels (E) with the holes in the side panel.
Apply presure to eliminate any gap between the lower shelf and the side panel,
and fix in place using wood screw (F).
E
F
F
F
F
E
F
Page 3 of 3
04
03
Congratulations!
Your printer stand is now ready for use.
To ensure lasting safety, we recommend that you periodically check
that all screws are tight and all parts are secure.
MISSION PRINTER STAND WITH SHELF
Step 4
Step 5
Adult assemblyAdult assembly
Adult assemblyAdult assembly