Atlantic Furniture WINDSOR HUTCH User manual

ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONS
Before assembling your Windsor Hutch, please read through these
instructions carefully, familiarising yourself with the different parts.
Please note that you will require a Phillips Head Screwdriver and an Allen wrench.
Page1of4
WINDSOR HUTCH
READY
Assembling by Adult
Phillips Head
Screwdriver
Customer Supplied
A
D
BC
E
HARDWARE
JCB M6 X 35mm - 8 pcs
METAL PLATE - 2 pcs
WOOD SCREW 8 X 5/8” - 11 pcs ALLEN WRENCH-1pc
WOOD SCREW 8 X 3/4” - 8 pcs
WINDSOR HUTCH
WINDSOR DESK WITH HUTCH
07152008

PARTS LIST
01
02
03
04
05
HARDWARE 1 BOX
1 SET
1PC
1PC
1PC
TOP STORAGE
LEFT SIDE PANEL
RIGHT SIDE PANEL
BACK PANEL
01
STEP 1
Page2of4
02
03
05
04
Lay the top storage (02) on the floor upside down,
taking care to lay it on some cardboard to prevent
scratching. Stand the side panel(03&04) upside down
and using JCB (A), tighten with Allen wrench (C).
04
02
03
A
A
A
A
C
ZOOM IN
WINDSOR HUTCH
Assembling by Adult
A
JCB
C
ALLEN WRENCH
07152008

B
B
B
B
B
B
B
B
B
B
B
Page3of4
07152008
STEP 2
Attach the back panel (05) to the Windsor Hutch as shown using 5/8”wood screws (B).
Tighten with Phillips head screwdriver.
05 Assembling by Adult
B
WOOD SCREW
Phillips Head
Screwdriver
Customer Supplied
Your Windsor Hutch is now ready to assemble with Desk.
WINDSOR HUTCH

D
E
Lift the Windsor Hutch onto the desk as shown.
Attach metal plate (D) to the Windsor Hutch and Desk as shown.
Using wood screw (E), tighten with Phillips head screwdriver.
STEP 3
STEP 4
Assembling by Adult
Assembling by Adult
D
E
METAL PLATE
WOOD SCREW
Phillips Head
Screwdriver
Customer Supplied
Congratulations !
Your Windsor Hutch is now ready for use.
We recommend that you recheck that all screws are tightened
And that all parts are secure before use and Periodically to ensure Safety.
WINDSOR DESK WITH HUTCH
Page4of4
07152008WINDSOR HUTCH