Atlantic Furniture PRINTER STAND MISSION PANEL User manual

Page1of2
Assembling by Adult
Before attaching your Printer stand mission panels, please read through these
instructions carefully, familiarising yourself with the different parts.
PRINTER STAND MISSION PANEL 05272009
01
01
02
ab
c
PARTS LIST
01
02
MISSION SIDE PANEL
LOWER SHELF
a - Wood dowel 1/4” X 1 1/4”
b - Wood dowel 3/8” X 1 1/4”
1 1/4”c - Wood screw
4 pcs
4 pcs
4 pcs
2 PCS
1PC
Phillips head
screwdriver
Customer supplied
01 02
STEP 1 STEP 2
Install wood dowels (a)(b) into the locator
holes on (01)(02) as shown below.
Repeat with the other panel.
Attach first side panel (01) to printer stand
aligning the dowels (a) with the holes in the
apron. Be sure the panel is centered before
tightening the wood screw (c).
bc
b
b
b
a
a
01
c
note : panel in center
ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONS
READY
PRINTER STAND MISSION PANEL

STEP 3
STEP 4
01
02
Attach second side panel (01) the same as the first but place the lower shelf (02) in
position by aligning the wood dowels (b) with the holes in the side panel.
Apply presure to eliminate any gap between the lower shelf and the side panel and
fix in place using wood screw (c).
b
b
c
c
c
Page2of2
05272009
PRINTER STAND MISSION PANEL