Atlantic Furniture OXFORD User manual

Adult assembly
Before assembling your headboard, please read through these
Page 1 of 2
Step 1 Step 2
Instructions apply for bed sizes
PARTS LIST HARDWARE
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at [e-mail] or 1-800-955-3726
READY
ASSEMBLE
TO
instructions carefully and familiarize yourself with the different parts.
HEADBOARD PANEL
BOARDS
HEADBOARD SUPPORT
4 PCS
1
2
3
4
1 PC
1 PC
1 PC
LEFT LEG
RIGHT LEG
Split washer - 4 pcs
Flat washer - 4 pcs
JCB M6 X 25mm (1”) - 4 pcs
HARDWARE FOR METAL BED FRAME
Spare - 1 pc
Spare - 1 pc
Spare - 1 pc
F
E
D
Allen wrench - 1pc
Spare - 1pc
FOR BED FRAME ASSEMBLY follow assembly instructions included with your bed frame.
If you purchased a wood headboard to attach to metal bed frame, please refer to page 2.
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
Spare - 1 pc
Spare - 1 pc
G
C
A
Attach the legs (2) and (3) to headboard
panel boards (1) using JCB M6 X 35mm (A).
Tighten with the Allen wrench (G).
Attach headboard support (4) to
headboard panel boards using wood
screw 1 1/4" (C) Tighten with the
Phillips head screw driver.
(Customer supplied)
Adult assembly
JCB M6 X 35mm
12
3
A
C
A
A
A
JCB M8 X 15mm
( 5/8") - 4 pcs Wood screw 1 1/4"-4 pcs
B
4
Wood screw
C
Assembly headboard
to open bed frame
JCB M6 X 35mm - 16 pcs
Spare - 1 pc

Adult assembly
Before assembling your bed, please read through these
Metal bed frames are sold separately from wood headboards. The hardware shown on this page
is supplied with your Atlantic wood headboard for attaching the bed frame to the headboard.
The metal bed frame is supplied with its own assembly instructions and hardware.
instructions carefully and familiarize yourself with the different parts.
ATTACHING HEADBOARD TO METAL BED FRAME
Attach the headboard assembly to the metal bed frame using JCB M6 X 1" (D), flat washer (E),
and split washer (F) then tighten with Allen wrench (G) as shown below.
Congratulations!
Allen wrench M4
G
D
D
F
F
E
E
Instructions apply for bed sizes
JCB M6 X 1”
D
Flat washer
Split washer
E
F
Page 2 of 2
Your bed is now ready for use.
HEADBOARD
To ensure lasting safety, we recommend that you periodically check
that all screws are tight and all parts are secure.
Step 1

Before assembling your bed frame, please read through these
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at [e-mail] or 1-800-955-3726
instructions carefully and familiarize yourself with the different parts.
Barrel nut - 2 pcs
JCB M8 X 15mm ( 5/8") - 4 pcs
JCB M6 X 110mm (4 3/8”) - 2 pcs
Wood screw(1 1/4”) - 29 pcs
Spare - 1 pc
Spare - 2 pcs
OPEN BED FRAME
Page 1 of 2
PARTS LIST HARDWARE
FOOT RAIL
LEFT LEG
RIGHT LEG
SIDE RAILS
SLAT KIT
SLAT SUPPORT 1
SLAT SUPPORT 2
SUPPORT LEGS
1 PC
1 PC
1 PC
2 PCS
2 SETS
1 PC
1 PC
3 PCS
A
D
H
E
F
G
I
B
C
1
2
3
4
5
6
7
8Allen wrench M4 - 1pc
Allen wrench M6 - 1pc
JCB M6 X 25mm(1") - 6pcs
Cap nut - 6pcs
Allen Screw - 3pcs
Spare - 1pc
4
4
1
2
3
B
B
A
A
B
C
C
C
C
A
Attach the legs (2) and (3)
to foot rail (1), using
JCB M6 X 110mm (A) and
barrel nut (B).
Tighten with the Allen wrench M4 (I).
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
Attach side rails (4) to the foot rail (1) as shown below using JCB M8 X 15mm (C).
Tighten with Allen wrench M6 (H).
Step 1
Step 2
READY
ASSEMBLE
TO
Adult assembly
JCB M6 X 110mm
Barrel nut
JCB M8 X 15mm

OPEN BED FRAME
READY
ASSEMBLE
TO
Page 2 of 2
Attach 2 slat kits (5) to the open bed frame as shown below using wood screws 1 1/4" (D).
Tighten with Phillips head screw driver. (customer supplied)
Step 6
E
F
D
D
F
F
Congratulations!
Your bed is now ready for use.
D
Wood screw 1 1/4"
5
5
6
7
E
E
F
F
E
E
If using a Trundle Bed attach slat supports off
center as shown.
E F
JCB M6 X 25mm Cap nut
5
5
D
Step 3 Step 4
Step 5
G
G
G
Allen screw
JCB M8 X 15mm
6
8
8
8
7
G
Attach open bed frame to the headboard
as shown below using 4 JCB M8 X 15mm bolts
that are supplied with your headboard.
Tighten with the Allen wrench M6 (E).
Attach support legs (8) to slat support 1 & 2 (6)(7) as
shown below. Using allen screw (G) tighten with
Allen wrench M4 (I).
Attach slat support 1(6) and slat support 2 (7) to the slat kit (5) as shown below
using JCB M6 X 25mm (E) and cap nut (F). Tighten with Allen wrench M4 (I).
We recommend that you periodically recheck that all screws are tight to ensure lasting safety.
2 legs at headboard section.
1 leg at footboard section.

Adult assembly
Before assembling your Trundle bed, please read through these
instructions carefully. Familiarize yourself with the different parts.
TRUNDLE BED
Page 1 of 4
HARDWARE
ADF
JCB M6 X 2 3/8 ”( 60mm ) - 4 pcs
Spare - 1 pc
JCB M6 X 1 5/8”( 40mm ) - 9 pcs
Spare - 1 pc
JCB M6 X 5/8”( 15mm ) - 6 pcs
Spare - 1 pc
For JCB M6 X 2 3/8”(60mm )
Fix L bracket to front panel
B
E
C
G
Barrel nut - 4 pcs Wood screw - 20 pcs
Spare - 2 pcs
L Bracket - 3 pcs
E
Allen wrench - 1 pc
Spare - 1 pc
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at [e-mail] or 1-800-955-3726
Phillips screwdriver
Customer supplied

PARTS LIST
01
02
03
04
HARDWARE 1 BOX 3 PCS
2 PCS
2 SETS
1 PC
1 PC
1 PC
FRONT PANEL
FRONT RAIL
BACK RAIL
05
06
07
LEFT, RIGHT, MID RAIL
REAR BLOCK
SLAT KIT WITH WEBBING
06
03
03
04
04
05
05
05
05
07
07
05
05
06
Attach the left, right and mid rails (05) to the front rail (03) using L bracket (E) and
JCB M6 X 1 5/8”(B). Attach left, right and mid rails (05) to the back rail (4) using JCB M6 X 1 5/8" (B).
Tighten with the Allen wrench (G).
02
Page 2 of 4
B
B
E
E
E
B
B
B
B
G
Allen wrench
B
E
L Bracket
JCB M6 X 1 5/8”
Step 1
Adult assembly
01
TRUNDLE BED

Attach the front panel (02) to the front rail (03) as shown, using JCB M6 X 5/8” (C).
Tighten with the Allen wrench (G).
Lay the slat kits (07) webbing side down onto the rail assembly as shown. Attach using wood
screw (F) and tighten with the Phillips head screw driver. (customer supplied)
Page 3 of 4
02
03
07
07
C
C
F
F
F
F
C
C
Step 2
Step 3
G
Allen wrench
C
JCB M6 X 5/8”
Adult assembly
TRUNDLE BED
F
Wood screw
Adult assembly
Phillips screwdriver
Customer supplied

Attach the rear blocks (06) to the back rail (04) as shown using JCB M6 X 2 3/8”(A) barrel nut (D).
Tighten with the Allen wrench (G)
Lastly, Insert Trundle bed to the bed as shown below.
Congratulations!
Your Trundle bed is now ready for use.
Page 4 of 4
D
Barrel nut
G
Allen wrench
A
JCB M6 X 2 3/8”
06
04
06
A
A
A
D
D
D
We recommend that you periodically check that all screws are tight
and all parts are secure to ensure lasting safety.
Step 4
Step 5
Adult assembly
Adult assembly
TRUNDLE BED