Atlantic 36835515 User manual

THIS INSTRUCTION BOOKLET CONTAINS
IMPORTANT SAFETY INFORMATION, PLEASE
READ AND KEEP FOR FUTURE REFERENCE.
Item # 36835515
Black Sea TV Cabinet
Fits PLASMA or LCD TV’s that measure 37 to 42 inches. If parts are missing, DO NOT
the store.To order missing / replacement parts or assembly assistance please
call 1-800-747-2660 or mail [email protected].
- 1 -
Lot Number
Date:
:
return to

- 2 -
Assembly Tips:
Become familiar with the instructions and all parts.
Make sure that all parts are in the box and in good condition.
Assemble the product on the open flat carton or a rug to protect the product and
your floor.
Some heavy products need a second person to assist in the assembly.
Use of power tools is not recommended.
Caution:
Never let children climb on furniture or play with furniture.
Do not sit or stand on furniture.
Do not overload shelves.
Use care when moving furniture. Furniture can tip over if moved improperly.
Only move furniture when it is empty of TV or other electronic components.
Care Instructions:
Use electrostatic dust cloths to clean furniture.
Do not set hot or cold containers directly on the furniture surface.
!
It is strongly recommended that at least two people carry out the assembly.
Do not place aTV that is heavier than the recommended load rating on the
furniture surface.
Do not install on sloping surface.
Assemble the product close to a wall.
With each step, first insert and hand-tighten all bolts and screws by hand. After ALL
BOLTS are slightly screwed in, fully tighten bolts with Phillips screwdriver in sequential
pattern (clockwise or counter clockwise).
Improper handling can result in cuts and lacerations.

V1
V2
V3
V4
V5
V6
V7
V8
V9
V10
V11
V12
V13
V14
V15
V16
V17
A
B
C
D
E
1
1
1
1
1
L 1
K 1
J 1
I 1
H 1
G 1
1F
1
1
1
1
2
2
1
2
1
O
N
M
P
Q
R
S
T
U
4
12
12
28
1
4
4
2
4
8
8
8
16
10
8
8
1
Components parts list
Item Qty Components parts list Item Qty
Components parts list
Item
Qty
Components parts list
Item
Qty
Components parts list
Item
Qty
Part List
-3-
Tool needed (not included)

F
E
B
C
D
A
V1 x 4 V4 x 2
1
V4 V1V4
1. Attach board (B,C,D,E,F) to the front board (A) with cam screws (V1) and wooden dowels (V4).
Turn the cam locks(on B&C) clockwise to secure.
Assembly Instruction
-4-

2
V4
G
V4 x 2
2. Attach back board (G) to the drawer with wooden dowels (V4).
-5-

3
V14 V5
V14
x 4
V5 x 1
G
3. Attach back panel (G) to the drawer with screws (V14, V5).
-6-

H
I
J
K
V4 x 8
V2 x 4
4
V4 V2 V3
V3
x 4
4. Attach Left & Right side board (H,I) to the middle boards (J,K) with screws (V2), cam lock(V3)
and wooden dowels (V4),then turn cam lock(V3) clockwise to secure.
-7-

MO
L
Lock
V3
x 8
V2 x 8
V4 x 8
5
V4 V2 V3
-8-
5. Place the assembled center part onto the top board(O) first with screws(V2)and cam lock(V3)
Attach main side board (M & L) to the top board (O) with screws (V2),cam lock(V3) and wooden
dowels (V4). Turn the CAM lock(V3) clockwise to secure.
.

-9-
6
Q
P
Q
6, Attach thin back, board (Q, P) to the TV cabinet body.

OK
N
V16 V15 x 8
V4 x 8
V14 x 6
V13 x 16
V7 x 4
7V4 V15 V7 V8V4
V14
V13
7. Attach bottom board (N) to the TV cabinet body with screws (V15)and wooden dowel(V4).
Attach feet (V7) to the bottom board (N) with screws (V13). Attach wood bar (V8) to the bottom
board (N) with screws (V14). After the feet are assembled, turn the whole unit over
and make it stand upright.
(NOTE: It is strongly recommended that at least two people carry out this step.)
Tools needed:
Not included
One set
-10-
V8