Atlantic WESTBROOK STAIRCASE BOOKSHELF User manual

Page 1 of 11
BUNK SAFETY WARNING
Size of Mattress and Foundation
The length and width of the upper and lower bunk mattress and foundation are as follows :
Width
37 ½”- 38 ½”
52”- 53”
LengthSize
74”- 75”
74”- 75”
Twin
Full
Thickness
9 ½” max
9 ½” max
You must use only this size mattress.
Ensure thickness of upper and lower mattress and foundation combined does not exceed 9 ½”
and that the mattress is at least 5” below upper edge of guardrails.
This Bunk Bed uses a slat kit for mattress foundation.
Replacement Parts
Replacement parts, including additional guardrails, may be obtained from any
Atlantic Furniture dealer
SAFETY WARNINGS
! !
( 1 )
( 2 )
( 3 )
( 4 )
( 5 )
( 6 )
( 7 )
( 8 )
( 9 )
(10)
(11)
(12)
(13)
Follow the information on the warnings appearing on the upper bunk end structure
and on the carton. Do not remove warning label from bed.
Always use the recommended size mattresses or mattress support, or both,
to help prevent the likehood of entrapment or falls.
Surface of mattress must be at least 5 in. (127mm) below the upper edge of guardrails.
Do not allow children under 6 years of age to use the upper bunk.
Periodically check and ensure that the guardrail, ladder, and other component are
in their proper position, free from damage, and that all connectors are tight.
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
Always use ladder for entering or leaving upper bunk.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
Use of a night light may provide added safety precaution for a child using the upper bunk.
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed
next to the wall, the guardrail that runs the full length of the bed should be placed against
the wall to prevent entrapment between the bed and the wall.
The use of water or sleep flotation mattresses is prohibited.
STRANGULATION HAZARD : Never attach or hang items to any part of the bunk bed
that are not designed for use with the bed; for example, but not limited to, hooks, belts
and jump ropes.
Keep these instructions for future reference.

ASSEMBLY INSTRUCTIONS
Adult assembly
Allen wrench
Phillips head
Customer supplied
screwdriver
Before assembling your Westbrook staircase bookshelf bunk bed, please read through these
Thank you for choosing our new bunk bed.
This practical design offers the utmost in versatility.
TWIN - TWIN
instructions carefully and familiariz yourself with the different parts.e
Please note that you will require a Phillips head screwdriver and an Allen wrench.
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at [email protected] or 1-800-955-3726
WESTBROOK STAIRCASE BOOKSHELF
READY
ASSEMBLE
TO
PO :
STAIRCASE CAN BE SET UP AT EITHER
END OF THE BUNK BED
A
C
FH
M
M
I
I
J
K
L
EEG
BCD
JCB M6 X 3 ” - 16 pcs1/8
Spare - 2 pcs
Spare - 1 pc
Spare - 1 pc
Spare - 1 pc Spare - 1 pc
Spare - 1 pc
Spare - 1 pc
Barrel nut - 6 pcs1 Allen crew " - pcss 1 5/8 16
L racketb - 4 pcs
Large L racket 1b-pc
Allen crew 2 3/4" - 4 pcss
Metal ins 4p - pcs
Wood crew 1 " - pcss 1/4 2
Wood crew 1 " - pcss 1/4 3
Wood crew 5/8" - 1 pcss1
Wooden owel - pcsd16
Wooden owel - pcsd4
Allen crew 2 3/8" - 8 pcss
Spare - 2 pcs Spare - pc2s
Spare - 1 pc
Spare - pc2s
Spare - pc2s
Allen crew 2" - pcss2 Allen crew 2" - pcss6
Page 2 of 21
Allen rench - pcw1
Allen rench - pcw1
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
PANEL HARDWARE HANDRAIL & BOOKSHELF HARDWARE

PARTS LIST
01
01
01
15
16
04
04
06
07
07
08
08
08
18
18
08
09
09
09
09
10
17
11
12
13
14
06
05
02
03
Page of 131
01
02
03
04
05
06
07
08
09
10
01
11
12
13
14
15
16
17
01
18
HARDWARE
A UPPER PANEL
B UPPER PANEL
LEFT, RIGHT END CAP
SHORT GUARD RAIL
LOWER PANEL
FRONT, BACK GUARD RAIL
LONG SRAIL
DRAWERS
BACK PANEL
HARDWARE
1 BOX
2 BOX
1 BOX
TOP PANEL 1
TOP PANEL 2
TOP PANEL 3
TOP PANEL 4
HAND GUARDRAIL
SIDE SHORT GUARDRAIL
BACK SHORT GUARDRAIL
2 BOX
HARDWARE
TWIN SLAT KIT
1 BOX
WESTBROOK STAIRCASE BOOKSHELF
TWIN - TWIN

STEP
STEP
08
02
03
A
B
B
Attach the long rails (0 ) to the upper panels (02) , using JCB M6 X 3 ” (A) and barrel nut ( ).8 (03) 1/8 B
Tighten with the Allen wrench (M).
08
A
B
M
JCB M6 X 3 ”1/8
Barrel nut
Allen wrench
A
A
B
B
18
1
2
A
Lay the twin slat kit (18) onto the bed. Fix in place using wood screws provided in the slat kit box.
FOR SLAT KIT ASSEMBLY follow assembly instructions included with slat kit.
Phillips head
Customer supplied
screwdriver
Page 4 of 11
WESTBROOK STAIRCASE BOOKSHELF
Adult assembly
Adult assembly
TWIN - TWIN

STEP 3
STEP 4
F
Allen crew 3/8s2”
M
Allen wrench
Attach the guard rails ( ) to the upper panel assemblies using (F)front, back 07 Allen screw .
Tighten with the Allen wrench (M).
07
05
05
04
04
07
F
E
E
F
F
F
F
F
F
F
CC
Insert wooden dowel (C) to the locator holes will receive C as shown below. short 5Attach the guard rail (0 )
left, right 4 Allen screw Eto the end caps (0 ), using ( ),Tighten with the Allen wrench (M).
C
E
Wooden oweld
Allen crew 2s”
M
Allen wrench
Page 5 of 11
WESTBROOK STAIRCASE BOOKSHELF
Adult assembly
Adult assembly
Note : Screw holes on end caps
should face inside section.
TWIN - TWIN

STEP 5
STEP 6
Attach the short guard rail assemblies to the upper panel assemblies as shown below, using wood screw (I),
tighten with the Phillips head screwdriver. (customer supplied)
SHORT GUARD RAIL ASSEMBLIES
INSIDE VIEW
Phillips head
Customer supplied
screwdriver
I
WOOD SCREW
1 1/4”
I
I
I
Attach the long rails ( ) to the lower panel ( ) using JCB M6 X 3 ½” (A), and barrel nut ( ).08 06 B
Tighten with the Allen wrench (M).
08
08
06
06
A
A
A
A
B
B
B
B
A
B
M
JCB M6 X 3 ”1/8
Barrel nut
Allen wrench
Page 6 of 11
Note : Screw holes on end caps
should face inside section.
WESTBROOK STAIRCASE BOOKSHELF
Adult assembly
Adult assembly
TWIN - TWIN

STEP 7
STEP 8
Lay the twin slat kit (18) onto the bed. Fix in place using wood screws provided in the slat kit box.
FOR SLAT KIT ASSEMBLY follow assembly instructions included with slat kit.
Phillips head
Customer supplied
screwdriver
18
Insert metal pins (H) into the holes on top of the lower panels. Lift the upper panels onto the lower
panels as shown, and fit the metal pins into the holes in the bottom of the upper panel legs.
H
H
H
H
This step requires
two strong people.
This step requires
two strong people.
CAUTION
!
Metal pins
H
Page 7 of 11
WESTBROOK STAIRCASE BOOKSHELF
Adult assembly
Adult assembly
TWIN - TWIN

C
Wooden oweld
STEP 9
STEP 10
Insert wooden dowel (C) to the locator holes will receive C as shown below.
Attach (1 ) to as shown below. Using allen screw ( ).top panels 1 (12)(13)(14) drawers (09) D
Tighten with allen wrench ( ),M
C
C
C
C
C
C
C
C
C
C
C
C
C
CC
C
D
D
D
D
D
D
13
14
12
11
11
09
09
09
09
D
Allen crews 1 5/8”
M
Allen wrench
Page 8 of 11
12
13
14
D
D
WESTBROOK STAIRCASE BOOKSHELF
Adult assembly
Adult assembly
TWIN - TWIN

STEP 11
STEP 12
D
Allen crews 1 5/8”
M
Allen wrench
G
Allen crew 2s 3/4”
I
M
Wood screw 1 1/4”
Allen wrench
D
D
10
17
Attach to as shown below. Using allen screw ( ).drawer assemblies back panel (10) D Tighten with Allen
wrench (M).
Remove drawers and install wood screw (I) to bottom rail as shown below. Tighten with Phillips head
screwdriver. (Customer supplied) Reinstall Drawers to drawer box.
Attach to .back short guardrail (17) drawer assemblies as shown below Using Allen screw (G). Tighten
with Allen wrench (M).
BACK VIEW
D
D
D
D
D
D
D
Page 9 of 11
G
G
I
I
I
WESTBROOK STAIRCASE BOOKSHELF
Adult assembly
Adult assembly
TWIN - TWIN

STEP 13
STEP 14
Attach (16) to the sing ( )side short guardrail staircase bookshelf assemblies. U allen screw E .
with llen wrench ( ).Tighten A M
Attach (15) to the sing ( ) Ghand guard rail staircase bookshelf assemblies. U allen screw E ( ).
with llen wrench ( ). Recheck that all screws are tight.Tighten A M
E
Allen crew 2s”
M
Allen wrench
E
E
E
E
E
E
G
G
16
15
E
G
Allen crew 2s”
Allen crew 2 3/4s”
M
Allen wrench
Page 10 of 11
WESTBROOK STAIRCASE BOOKSHELF
Adult assembly
Adult assembly
TWIN - TWIN