Atlantic QUEEN E-65403 User manual

ASSEMBLY INSTRUCTION
( QUEEN E-65403, KING E-65503 )
Before assembling your bed slat kit, please read through these
instructions carefully and familiarize yourself with the different parts.
PARTS LIST
HARDWARE
Step 1
Step 2
SLAT SECTION
SUPPORT RAIL
TALL SUPPORT LEG
SHORT SUPPORT LEG
2 SET
2 PCS
4 PCS
4 PCS
01
02
03
04
A
C
BC
Allen wrench
Phillips
Customer supplied
screw driver
Please note that you will require a Phillips screwdriver and an Allen wrench.
Allen wrench
1 1/2” Allen screw - 8 pcs
Spare - 1 pc
1 1/4” Wood screw - 8 pcs
Spare - 2 pcs
Allen wrench - 1 pc
Spare - 1 pc
Assemble support legs (03 or 04) and support rail (02).
Using Allen screw (A).
Tighten with the Allen wrench (C).
Repeat for other support rail.
Page 1 of 2
SLAT KIT QUEEN OR KING
NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE
ALLEN WRENCH, ALLEN SCREW, OR WOOD SCREWS
ARE DAMAGED DURING ASSEMBLY.
Assemble bed frame according to assembly instructions.
If using mattress and foundation set the bed up low and use short support leg (04).
If using storage drawers choose the tall support leg (03).
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at [email protected] or 1-800-955-3726
02
A
AC
03 / 04
03 / 04
A
2 1/2” Allen screw
READY
ASSEMBLE
TO
PO :
Adult assembly
Adult assembly

Page 2 of 2
Attach support rail assembly (02) to slat section (01).
Lay the slat section (01) onto the bed.
Screw slat section (01) to side rail, using wood screw (B).
Tighten with Phillips screwdriver. (Customer supplied).
Be sure the space between slats is even.
Using Allen screw (A), tighten with the Allen wrench (C).
Repeat for section 2.
B
A
A
01
01
A
1 1/2” Allen screw
C
Allen wrench
B
1 1/4” Wood screw
SECTION 1
SECTION 2
Phillips screwdriver
Customer supplied
Be sure to align slat section evenly with both
ends of side rail.
02
B
A
SLAT KIT QUEEN OR KING
Step 3
Step 4
Adult assembly
Adult assembly