Atlantic SHAKER PRINTER STAND CHARGING STATION User manual

Page 1 of 2
Adult Assembly
ASSEMBLY INSTRUCTIONS
SHAKER PRINTER STAND CHARGING STATION
SHAKER PRINTER STAND CHARGING STATION
Hexagon Wrench
ABC
Flat washer - 8 pcs
Spare - 2 pcs
Hexagon nut - 8 pcs
Spare - 2 pcs
Hexagon wrench - 1 pc
NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE HEXAGON NUT, OR WASHER ARE DAMAGED DURING ASSEMBLY.
PARTS LIST
01
02
TOP PANEL 1 PC
4 PCS
LEG
01
02
READY
ASSEMBLE
TO
Before assembling your Printer stand, please read through these
instructions carefully and familiarize yourself with the different parts.
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at [email protected] 1-800-955-3726 / M-F 9:00-5:00 EST

Page 2 of 2
STEP 1
Attach the legs (02) to the top panel (01) using flat washers (A) and hexagon nuts (B),
tighten with hexagon wrench (C), as shown below.
02
02
02
02
01
A
B
02
A
B
AA
B
B
Adult Assembly
SHAKER PRINTER STAND CHARGING STATION
Congratulations!
Your Printer stand is now ready for use.
To ensure lasting safety, we recommend that you periodically check
that all screws are tight and all parts are secure.