Atlantic Dardashti Z1-21 User manual

Item#: 780503367 /68/69/70/71
Dardashti
Gaming Desk Z1-21
Ver. 01 4/14/21
Customer Service:
800-747-2660

1
Assembly Tips:
Become familiar with the instructions and all parts. Make sure that all parts are in the box and in good condition.
Assemble the product on the open flat carton or a rug to protect the product and your floor.
Some heavy products need a second person to assist in the assembly.
Use of power tools is not recommended.
Consejos para armar:
Familiarícese con las instrucciones y todas las piezas. Asegúrese de que todas las partes estén en la caja y en
buenas condiciones. Arme el producto sobre la caja de cartón plana abierta o una alfombra para proteger el
producto y su piso. Algunos productos pesados necesitan una segunda persona para ayudar a armarlos.
No se recomienda el uso de herramientas eléctricas.
Caution:
Never let children climb on furniture or play with
furniture. Do not place a weight heavier than the
recommended load rating on the furniture surface.
Use care when moving furniture. Furniture can tip
over if moved improperly. Improper handling can
result in cuts and lacerations. Do not install on
sloping surface.
Tenga cuidado al mover muebles. Los muebles
pueden caerse si se mueven de manera incorrecta.
No instale en una superficie en pendiente.
!
Care Instructions:
Use electrostatic dust cloths to clean furniture.
Do not set hot or cold containers directly on the furniture surface.
Instrucciones para el cuidado:
Utilice paños de polvo electrostáticos para limpiar los muebles. No coloque recipientes calientes
o fríos directamente sobre la superficie de los muebles.
Precaución:
Nunca deje que los niños suban sobre muebles o
jueguen con los muebles. No coloque un peso que
sea más pesado que la capacidad de carga recom-
endada en la superficie del mueble.
!
Power/Standby
Press to turn remote on or switch to standby. At power on,
remote will return to previous setting.
Energía/En Espera
Púlselo para encender el control remoto o pasar al modo
de espera. Al encenderlo, el control remoto regresará a la
configuración anterior.
Mode +/-
Switch to one of 22 dynamic modes or from static mode.
Modo +/-
Cambie a uno de los 22 modos dinámicos o del modo estático.
Speed +/-
Increase (+) or decrease (-) dynamic mode speed.
Velocidad +/-
Aumentar (+) o disminuir (-) la velocidad del modo dinámico.
Color +/-
Switch to static from dynamic mode or between static colors.
Color +/-
Cambie a estático desde el modo dinámico o entre colores.
Bright +/-
Switch to static from dynamic mode and increase or decrease brightness.
Brillo +/-
Cambie a estático desde el modo dinámico y aumente o disminuya el brillo.
Static Colors
Choose or change to one of 7 static colors.
Colores Estáticos
Elija o cambie a uno de los 7 colores estáticos.
SPECIFICATIONS
Dynamic Modes 22
Static Colors 7
PWM Grade 256
Brightness Levels 5
Speeds 10
Demo Modes 17
Voltage 5-24 VDC
Peak Current 3x4A
Average Current 3x2A
Remote Frequency
433.92 mHz
Operating Distance <40 ft.
Demo Mode
Modo de
Demostración
LED Remote Operation

Parts List/ Lista de Piezas

3
1
2
Ax8
Use Allen wrench (D) to attach all bolts.
Lay left leg (1) on the floor and attach
and tighten crossbar (3) with three bolts
(A). Lay assembly with crossbar on the
floor. Attach and tighten right leg (2) to
crossbar (3) with three bolts (A). Hand
thread four leveling feet (E) into feet.
Center power strip tray (4) in the middle
of crossbar (3) and slide it onto crossbar
(3), making sure it is flush.
.
Ex4

4
3
4
Ax4
Lay desktop (5) on top of the frame and
align the holes with the metal attachment
tabs. Using Allen wrench (D), attach but do
not fully tightenthe the four bolts (A). Now
working in a clockwise sequence tighten
all four bolts until the frame fits flush against
the desktop.
Use Allen wrench (D) to attach all
bolts (A). Attach drink holder (6) with
three bolts (A) on either side of desk.
Attach the headphone holder (7) with
two bolts on the other size of desk.
.
Ax5

5
5
Bx4
Two people are required to carefully lift and position
the glass desktop in the center ope ning until it is flush.
Using a Phillips screw driver, attach metal plate (9) with
four screws (B), so it overlaps the glass and is lays flat.
Using Allen wrench (D), attach the USB hub (10) to the
left underside with two bolts (C).
Cx2