Atlas Equipment RJ-6000 User manual

Replace This With Cover PDF

Read this entire manual before operation begins.
Record below the following information which is located on the serial number
data plate.
Serial No.
Model No.
Date of Installation

Contents
Specifications. . . . . . . . . . . . . 4
Installation . . . . . . . . . . . . . . 5
Exploded View . . . . . . . . . . . . 8
Parts List . . . . . . . . . . . . . . . 9

Specifications 4
RJ-6000
Specifications
Features
• Safety self-lock mechanism
• Convenient
• Can be used seperatly or match with lifts (four post, PX scissors, etc.)
• Adjustable adapters assembly
The structure of the RJ-6000 is the same between two version, but the standard
is matched with air pump while the manual is matched with a hand pump.
Specifications
Lifting
Capacity Lifting Height Lifting Times Overall Width Overall Depth Min. Height Gross Weight Air (Psi)
6000 lbs 20” 50s 36” 18.5” 7 3/4” 265 lbs 70-95

Installation 5
RJ-6000
Installation
Connect The Pump
To An Air Source
Note: Air pressure must be
at 70-95 PSI.
Lift Vehicles
1. Choose the suitable adapters (Fig. 3)
2. Extend the upper extension to proper length to fit the lifting point of the
vehicle (Fig. 4)
Fig. 3 Fig. 4
Fig.1
Hand pump
connected with
cylinder
Hand pump
Fig.2
Upper Extensions
2.5”, 1.5” adapters

Installation 6
RJ-6000
3. Fill air into the oil pump (Fig.5)
4. Raise the Jack and lock the Jack
in the safety lock (Fig. 6)
Fig. 5
Fig. 6
Press Down And Fill With Air
First tighten the
rotation switch
clockwise
And then press the hand
pump handle up and
down to fill the air in.
L
oc
k Th
e
Jac
k

Installation 7
RJ-6000
Lower the Jack
1. Raise the Jack for few seconds to release the safety device, and then open
the safety device by the safety device handle.
Fig. 7 Fig. 8
2. To lower the jack, press the control plate of the air pump (automatic), or
loosen the rotation switch of hand pump counter clockwise (manual).
Fig. 9 Fig. 10
Open The Safety Device By
Pushing The Safety Device Handle
Release The Safety Device
Press The Control Plate Down
Adjust the
rotation switch
of hand pump
counter-clockwise
to lower

Exploded View 8
RJ-6000
Exploded View
Cylinder
Fig. 13
Fig. 12

Parts List 9
RJ-6000
Parts List
Parts For Structure
Item Part No. Description QTY (Auto) QTY (Manual)
1 680001 Upper Extension (Left) 1 1
2 201002 Hex Bolt 2 2
3A 680004 Rubber Pad 2 2
3B 209009 Cup Head Bolt 8 8
3 680006 Upper Tube 1 1
4 680030C Rubber Pad Support assembly 2 2
5 680007 Upper Extension (Right) 1 1
6 680055 Hex Bolt 1 1
7 680008 Pin for Upper Roller 2 2
8 680009 Roller 4 4
9 206032 Snap Ring 4 4
10 680011 Pin for Lower Roller 2 2
11 680012 Lower Extension (Right) 1 1
12 680013 Socket Bolt 1 1
13 206023 Self locking Nut 5 5
14 600003 Safety Device 1 1
15 209051B Stackable Adapter (1.5”) 2 2
16 209052B Stackable Adapter (2.5”) 2 2
17 690018 Hex Bolt 2 2
18 680023A Base 1 1
19 680017 Lower Extension (Left) 1 1
20 680016 Pulley 4 4
21 680031 Bearing 4 4
22 680010 Snap Ring 4 4
23 680018 Spring 44
24 680019 Shaft 4 4
25 420097 90° Fitting 1 1
26 420005 Fixing Bolt 1 1
27 680021 Oil Cylinder 1 1
28 600033 Outer scissor 1 1
29 600034 Inner scissor 1 1
30 620022 Self locking Nut 2 2
31 680032 Scissors Pin 2 2
32 420146 Fitting For Air line 1
33 670002 Air Pump 1
34 670005 Throttle valve 1
35 690016 Oil Hose 1
36 420097 Straight fitting 1
37 720070 J6H oil hose 1
38 209043 Hex Bolt 2
39 690002 Hand pump 1
40 209021 Hex Bolt 22

Parts List 10
RJ-6000
Parts For Cylinder
Item Part No. Description QTY Item Part No. Description QTY
27-1 209078 Dust Ring 1 27-7 201029 Support Ring 1
27-2 670006 Head Cap 1 27-8 201030 Y Ring 1
27-3 670007 Bore Weldment 1 27-9 201030A Support Ring 1
27-4 670008 Piston Rod 1 27-10 206069 O Ring 1
27-5 670009 Piston 1 27-11 206071 Hex Bolt 1
27-6 201031 O Ring 1