Atlas Equipment RJ-8000 User manual

Replace This With Cover PDF

Read this entire manual before operation begins.
Record below the following information which is located on the serial number
data plate.
Serial No.
Model No.
Date of Installation

Contents
Specifications . . . . . . . . . . . . . 4
Installation . . . . . . . . . . . . . . 5
Maintenance & Service . . . . . . . . 7
Exploded View . . . . . . . . . . . . 8
Parts List . . . . . . . . . . . . . . . 9

Specifications 4
RJ-8000
Specifications
Features
• Safety self-lock mechanism
• Convenient
• Can be used separately or match with lifts (four post, scissors, etc.)
• Adjustable adapter assembly
Specifications
Lifting
Capacity
Lifting
Height
Lifting
Times
Overall
Width
Overall
Depth
Min.
Height
Gross
Weight Air (Psi)
8000 lbs 20” 50s 40” 23” 10” 330 lbs 70-115

Installation 5
RJ-8000
Installation
Connect The Pump
To An Air Source
Note: Air pressure must be
at 70-115 PSI.
Lift Vehicles
1. Choose the suitable adapters (Fig. 3)
2. Extend the upper extension to proper length to fit the lifting point of the
vehicle (Fig. 4)
3. Fill air into the oil pump (Fig.5)
4. Raise the Jack and lock the Jack in the safety lock (Fig. 6)
Fig. 3 Fig. 4
Fig. 5 Fig. 6
Fig.1
Upper Extensions
5”, 2.5”, 1.5” adapters
Press Down And Fill With Air Lock The Jack

Installation 6
RJ-8000
Lower The Jack
1. Raise the Jack for few seconds to release the safety device, and then open
the safety device by the safety device handle.
Fig. 7 Fig. 8
2. Press the control plate of the air pump to lower the jack.
Fig. 9 Fig. 10
Open The Safety Device By
Pushing The Safety Device Handle
Release The Safety Device
Press The Control Plate Down Level Position

Maintenance & Service 7
RJ-8000
Maintenance & Service
1. Check all connectors, bolts and pins to insure proper mounting
2. Lubricate all moving parts with lubricant

Exploded View 8
RJ-8000
Exploded View
Cylinder

Parts List 9
RJ-8000
Parts List
Parts for lift structure
Item Part No. Description QTY Item Part No. Description QTY
1 680035A Upper Extension 1 19 680075 Fix shaft for pulley 4
2 201022 Hex Bolt 2 20 680016 Pulley 4
3 690021 Upper Tube 1 21 680031 Bearing 4
4 680030C Rubber Pad Support
Assembly 2 22 680010 Snap Ring 4
5 209021 Hex Nut 2 23 680018 Spring 4
6 680055 Hex Bolt 1 24 680074 Pulley cover 4
7 680008 Pin for Upper Roller 2 25 420097 90° Fitting 1
8 680009 Roller 4 26 420005 Fixing Bolt 1
9 206032 Snap Ring 4 27 680021 Oil Cylinder 1
10 680011 Pin for Lower Roller 2 28 760621 Outer scissor 1
11 760623 Lower Extension 2 29 680045 Inner scissor 1
12 680076 Pin for safety device 1 30 620022 Self locking Nut 2
13 206023 Self locking Nut 4 31 680032 Scissors Pin 2
14 680015 Safety Device 1 31A 620064 M6Jerk 2
15 209051B Stackable Adapter(1.5”) 2 32 420146 Fitting For Air line 1
16 209052B Stackable Adapter(2.5”) 2 33 670002 Air Pump 1
16A 209053B Stackable Adapter(5”) 2 34 670005 Throttle valve 1
17 690019 Hex Bolt 2 35 670004 Oil Hose 1
18 680040 Base 1 36 420037 φ16Spring 2
Parts for RJ-8A Cylinder
Item Part No. Description QTY Item Part No. Description QTY
27-1 209078 Dust Ring 1 27-7 201029 Support Ring 1
27-2 670006 Head Cap 1 27-8 201030 Y Ring 1
27-3 670007 Bore Weldment 1 27-9 201030A Support Ring 1
27-4 670008 Piston Rod 1 27-10 206069 O Ring 1
27-5 670009 Piston 1 27-11 206071 Hex Bolt 1
27-6 201031 O Ring 1