Atmel ATREB212BSMA-EK User manual

Chipsmall Limited consists of a professional team with an average of over 10 year of expertise in the distribution
of electronic components. Based in Hongkong, we have already established firm and mutual-benefit business
relationships with customers from,Europe,America and south Asia,supplying obsolete and hard-to-find components
to meet their specific needs.
With the principle of “Quality Parts,Customers Priority,Honest Operation,and Considerate Service”,our business
mainly focus on the distribution of electronic components. Line cards we deal with include
Microchip,ALPS,ROHM,Xilinx,Pulse,ON,Everlight and Freescale. Main products comprise
IC,Modules,Potentiometer,IC Socket,Relay,Connector.Our parts cover such applications as commercial,industrial,
and automotives areas.
We are looking forward to setting up business relationship with you and hope to provide you with the best service
and solution. Let us make a better world for our industry!
Contact us
Tel: [phone] Fax: [phone]
Email & Skype: [email protected]om Web: www.chipsmall.com
Address: A1208, Overseas Decoration Building, #122 Zhenhua RD., Futian, Shenzhen, China
  

APPLICATION NOTE
AT03324: Atmel REB212BSMA-EK Quick Start Guide
Atmel MCU Wireless
This application note briefly describes how to set up and run the pre-flashed
applications supplied with the Atmel®REB212BSMA Evaluation Kit.
Introduction
The Atmel Controller Base Board (CBB) serves as the microcontroller platform
for the Atmel Radio Extender Board (REB). The REB connected to a CBB forms
a fully functional, battery powered and portable wireless node. The
REB212BSMA Evaluation Kit (REB212BSMA-EK) is targeted for evaluating the
new features of the Atmel AT86RF212B radio transceiver.

AT03324: Atmel REB212BSMA-EK Quick Start Guide [APPLICATION NOTE]
Error! Reference source not found.
2
Table of Contents
1. Getting Started................................................................................... 3
1.1 Kit Contents ...................................................................................................... 3
1.2 Board Assembly................................................................................................ 3
1.3 Connecting to a PC........................................................................................... 3
1.4 Programming..................................................................................................... 4
2. Performance Analyzer........................................................................ 4
Appendix A. Revision History............................................................. 5

AT03324: Atmel REB212BSMA-EK Quick Start Guide [APPLICATION NOTE]
Error! Reference source not found.
3
1. Getting Started
Additional hardware and software documentation related to the REB212BSMA-EK can be found on the kit website:
http://www.atmel.com/tools/REB212BSMA-EK.aspx
Detailed board information can be found in:
•AVR2042: REB Controller Base Board - Hardware User Manual
•AVR2122 REB212BSMA-EK - Hardware User Manual
1.1 Kit Contents
2 x Atmel Radio Extender Board, REB212B
2 × Atmel REB Controller Base Board
1 × USB level converter
2 x SMA, 860-930MHz antenna
4 x AAA batteries
1.2 Board Assembly
To assemble the kit follow the board assembly guide bellow:
1. Check/set power switch off at the two CBBs.
2. Insert two batteries in each CBB.
3. Connect each REB to a CCB to create two REB-CBB assemblies
4. Connect the USB level converter on one of the REB-CBB assemblies via the 6pin ribbon cable such that it fits
the notch on the level converter and the colored stripe of the ribbon cable connects to pin 1 of the CBB header,
USARTD0.
1.3 Connecting to a PC
Before connecting the USB level converter to the USB port of the PC, install the driver as described below:
Driver installation
1. Download the drivers required for the USB level converter from http://www.atmel.com/REB212BSMA-EK
and extract the archive to a folder of your selection.
2. Power on the REB-CBB assemblies by switching on the power switch located on the top side of the CBB

AT03324: Atmel REB212BSMA-EK Quick Start Guide [APPLICATION NOTE]
Error! Reference source not found.
4
3. If the ‘New Hardware Found’ wizard prompts for drivers ignore Windows® update search (‘No, not this
time’).
4. In the next dialog, select ‘Install from a list or a specific location’ and point to the extraction directory.
Confirm installation, ignore warnings that the driver is not digitally signed or did not pass the Windows
driver certification.
5. If no wizard pops up, install drivers manually via the device manager. Note that the driver installation needs
to be performed twice.
6. Once properly installed a COM port will be visible in the device manager
1.4 Programming
The kit initially contains a boot loader and the Performance Analyzer, to add new SW or update the boot loader or the
JTAG/SPI interface can be used. For detail information on how to program see
•AVR2042: REB Controller Base Board - Hardware User Manual
•AVR2054: Serial Boot loader User Guide
2. Performance Analyzer
The Performance Analyzer FW together with the GUI in Atmel Studio Wireless Composer Extension provides a number
of basic functional tests. A quick start guide and general help is provided in Wireless Composer.
To get started
•Install Atmel Studio
•Once Studio is installed and started use the Tools - Extension Manager to install the Wireless Composer
•Connect one of the REB-CBB assemblies to the PC and power on, a COM port should now be available for the
kit.
•Power on the other REB-CBB assemblies and use it as a reference
•Start Wireless Composer GUI (Tools – Performance Analyzer) and follow the quick start guide.

AT03324: Atmel REB212BSMA-EK Quick Start Guide [APPLICATION NOTE]
Error! Reference source not found.
5
Appendix A. Revision History
Doc. Rev.
Date
Comments
A
04/2013
Initial revision.

Atmel Corporation
1600 Technology Drive
San Jose, CA 95110
USA
Tel: [phone]
Fax: [phone]
www.atmel.com
Atmel Asia Limited
Unit 01-5 & 16, 19F
BEA Tower, Millennium City 5
418 Kwun Tong Road
Kwun Tong, Kowloon
HONG KONG
Tel: [phone]
Fax: [phone]
Atmel Munich GmbH
Business Campus
Parkring 4
D-85748 Garching b. Munich
GERMANY
Tel: [phone]
Fax: [phone]
Atmel Japan G.K.
16F Shin-Osaki Kangyo Building
1-6-4 Osaki, Shinagawa-ku
Tokyo 141-0032
JAPAN
Tel: [phone]
Fax: [phone]
© 2013 Atmel Corporation. All rights reserved. / Rev.: 42127A−WIRELESS−04/2013
Atmel
®
, Atmel logo and combinations thereof, Enabling Unlimited Possibilities
®
, and others are registered trademarks or trademarks of Atmel Corporation or its
subsidiaries. Other terms and product names may be trademarks of others.
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this
document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES
NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF
INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no
representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at any time
without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in,
automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.