Audibax Detroit 1000X DSP User manual

Detroit 1000X DSP
Please read the manual before using the product
USER´S
MANUAL
3
Detroit 1000X DSP
Specifications
Model No.
Detroit 1000X DSP
Type
1pc column + 1pc 12'' subwoofer
Frequency Response (-6dB)
45 Hz - 20 kHz
Max. SPL (1m, free space)
125 dB
Power Output (RMS)
400W+200W
Impedance
4Ohms
Transducer HF
8pcs * 3" driver, 20mm voice coil
Transducer LF
12" subwoofer, 2.5" voice coil
Amplifier
Class-D amplifier
DSP Module DSP-100, 96 kHz, 24-bit DSP processorwith preset modes: Monitor, DJ,
Live
Protection
Short circuit overheating, over-current
Controls
Power On / Off switch, main level,DSP modes switch
Indicators
Power, signal
Audio Input / Output
3 * Combo XLR/Jack input, 1 * L/R Jack input,1 * Aux input, 1 * XLR
output
Power Input / Output
Powercon
Power Supply
230V 50/60 Hz
Enclosure
ABS/PP Plastic
Dispersion (H * V)
120° * 16°

Detroit 1000X DSP USER´S
MANUAL
1 2
Please read and keep all safety and use instructions. Important Safety Instructions
Refer to the user manual for more information about your Detroit 1000X DSP
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufactu-
rer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produces heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wider blade or third prong is
provided for your safety. If the provided plug does not fit in your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where it exits from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
13. Unplug this apparatus during lightning storms or when unused for long periods of
time.
14. Refer all servicing to qualified personnel. Servicing is required when the apparatus
has been damaged in any way such as power-supply cord or plug is damaged,
liquid has been spilled or objects have falleninto the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or has been dropped.
WARNINGS/CAUTIONS:
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
This symbol on the product means there is uninsulated, dangerous voltage
within the product enclosure that may present a risk of electrical shock.
This symbol on the product means there are important operating and
maintenance instructions in this guide.
Contains small parts which may be a choking hazard. Not suitable for
children under age 3.
This product contains magnetic material. Consult your physician on whether
this might affect your implantable medical device.
1. CH1/CH2/CH3/CH4 VOL:
Four Channels Volume Control.
2. Master VOL:
Master Volume Control.
3. Treble VOL:
Treble Volume Control.
4. Bass VOL:
Bass Volume Control.
5. Effect VOL:
Eect Volume Control.
6. Mode Switch:
Swipe to switch modes: Microphone, Guitar,
Line.
7. CH1/CH2/CH3 XLR Input:
Balanced XLR input for getting signals from
mixers or preamplifiers.
8. CH4 L/R Jack Input:
Balanced L / R Jack input for getting signals
from mixers or preamplifiers.
9. CH4 Aux Input:
Balanced Aux input for getting signals from
mixers or preamplifiers.
10. Indicator Light:
Power / Signal.
11. Bluetooth Button:
Press once to connect a Bluetooth device or
disconnect a paired Bluetooth device.
12. TWS Button:
Press once to connect a TWS device or
disconnect a paired TWS device.
13. DSP Preset:
There are three preset mode: Monitor / DJ /
Live.
14. Phase Switch:
Allows user to reverse phase 180°
15. Line Out:
Balanced XLR connectors connected in parallel
to the inputs to connect subwoofer.
16. AC Input:
Please Use AC input cable from the original
manufacturer only.
17. Power Switch:
Turns unit on or o.
System Setup
Connections and Controls
CH 1CH2 CH3 LINE OUT CH4
Line Line Line
13
2
1. MONITOR
2. DJ
3. LIVE
DSP Preset
T W S
PHASE
SIGNAL
POWER
0°
180°
M I N M A X
M A S T E R
CLIP CLIP CLIP CLIP CLIP
TR E B L E TR E B L ETR E B L E
E F F E CT E F F E C TEF F E C T
V O L V O L V OL V O L
M I N M A X
M I N M A X
M I N M A X
M I N M A X
CH 1
M I N M A X
M I N M A X
M I N M A X
M I N M A X
CH2
M I N M A X
M I N M A X
M I N M A X
M I N M A X
CH3
M I N M A X
CH4
Detroit 1000X DSP