Audiovox 1286808A User manual

1
D1705
PORTABLE 7" LCD MONITOR AND DVD PLAYER
128-6808A
WWW
.audiovox.com
For Customer Service
Visit Our Website At
Product Information, Photos,
FAQ’s Owner’s Manuals

2
Notice:
This Product incorporates copyright protection technology that is pro-
tected by method claims of certain patents and other intellectual prop-
erty rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by
MacrovisionCorporation,andisintendedforhomeandotherlimitedview-
ing uses only unless authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.

3
A. Introduction
Thank you for selecting the D1705 portable DVD player. The main
features include a 7" Wide Screen (16:9 Aspect Ratio) Liquid Crystal
Display (LCD) monitor and a DVD player. The unit applies the latest
state of the art electronics and is designed for use in hotels, offices
or your home. The unit is constructed to provide years of reliable,
trouble-free service, and is compact so that you can take it with you
anywhere and is designed for quick and easy installation. Please
read the entire instruction manual supplied with this product prior to
operation. The documentation will assist you in installing the system
properly to obtain the best equipment performance. Please retain
this manual for later use.
B. Cautions and Warnings
1. Placement
To prevent fire or electric shock, do not expose this appliance to
rain or moisture. Do not place the set on an unstable cart, stand,
tripod, bracket or table to prevent it from falling. Keep the unit away
fromstrongmagnets,heatsources,directsunlight,excessivedust.
If the unit is brought directly from a cold to a warm location, mois-
ture may condense inside the unit. When you move it from a cold
to a warm location, wait for about one hour before operating the
unit, or remove the disc and leave the unit turned on until the mois-
ture evaporates.
2. Installation
Ensure that the D1705 is installed in accordance with the instruc-
tions and illustrations provided in this manual.
3. Object and Liquid
Do not push objects of any kind into the unit through openings; do
not spill or spray liquid of any kind on or in the system (this may
result in a fire or electric shock). Do not place anything heavy on
the unit. To ensure proper ventilation and proper operation, never
coveror block theslots and openingswith a clothor other material.
4.Disassemble
Do not attempt to disassemble the cabinet. There is a risk of elec-
tric shock and/or exposure to Laser Radiation. Contact qualified
service personnel if your system is in need of repair.

4
5.Cleaning Unit
Whencleaning,makesurethesystemisunplugged fromthepower
source. Do not use liquid cleaners or aerosol cleaners. Use a
cloth lightly dampened with water for cleaning the exterior of the
system only.
6.Disc
Do not use irregularly shaped discs such as heart or star-shaped
discs as they may cause the unit to malfunction. Do not stick pa-
per, tape or glue on the disc. Do not expose the disc to direct sun-
light or heat sources such as hot air ducts. Do not touch the sur-
face of disc. Handle the disc by its edge. Clean the disc by wiping
thedisc from thecenter out witha cleaning cloth.Remove the disc
from the unit and store it in its case after playing. Some playback
operations of discs may be intentionally fixed by software produc-
ers. Since this unit plays discs according to the disc contents the
softwareproducersdesigned,someplaybackfeaturesmaynotbe
available. Also refer to the instructions supplied with the discs.
C. Contents
1. 1 x 7.0’’ LCD Monitor & DVD Player Combo
2. 1 x AC to DC Adapter
3. 1 x Rechargeable Battery
4. 1 x Remote Control
5. 1 x Instruction Manual
6. 1 x Audio/Video Cable
7. 1 x Cigarette Lighter Adapter
D. Powering and installation
1. Powering the system indoors (Refer to Figure 1)
Plug one end of the AC to DC adapter into the DC 9V jack
on the left side of the main unit, then plug the other end into
the 110V AC power socket.
2. Powering the system in a car
Plug one end of the cigarette lighter adapter into the
DC 9V jack on the unit, then plug the other end into
the cigarette lighter socket.

5
1 2
Figure 1
E. Controls, Indicators, and Connectors
1. Unit View (Refer to Figure 2)
Figure 2
BRIGHT.
DC 9V VIDEOAUDIO IN OUT
1
2
3
4 5 6
7
8
9
10
14
16
15
11
13
12
18 2019 21
23
22
17
24
26

6
1) Menu
2) Up button
3) Left Button
4) OK Button
5) Down Button
6) Right Button
7) Close disc cover point
8) Open Button
9) Previous Button
10) Stop Button
11) Next Button
12) Play Button
13) Pause Button
14) Screen Mode ( wide) Button
15) Remote Control Sensor
16) Power LED
17) DC 9V Input Jack
18) Audio Jack (L+R)
19) Video Jack
20) AV Input /Output Switch
21) Brightness Up/Down Thumbwheel
22) Power On/ Off Switch
23) Volume Up/Down Thumbwheel
24) Hi-Fi Headphone Jack
25) Coaxial Jack
26) Power Saving Mode Switch (Screen closed shut off switch)
27) Battery Catch
28) Battery Port

7
2. Remote Control View (Refer to Figure 3)
1) Display Button
2) Angle Button
3) Subtitle Button
4) Audio Button
5) Zoom Button
6) Up/Down/Left/Right/Enter Buttons
7) Return Button
8) A-B Button
9) Forward Button
10) Reverse Button
11) Slow Button
12) Stop Button
13) Number Buttons
14) Setup Button
15) Menu Button
16) Repeat Button
17) SKIP-
18) SKIP+
19) Play Button
20) Pause Button Figure 3
F. Loading and Playing a Disc
a. After connecting power to the unit, power on”DVD player” with
the power switch.
b. Open the disc tray by pressing OPEN , place a disc into the
tray with label side of disc facing up.
c. Close the tray by pressing “PRESS” button.The unit will load
the disc and go to the root menu. Start playback by pressing
“PLAY”.
d. Rotate the BRIGHT and VOLUME controls to adjust the picture
brightness and the DVD player’s volume.
e. To stop playing a disc, press STOP.

8
G. SETUP
Press ‘SETUP’ to display the Main screen of the SETUP Menuon
the screen. Press ‘SETUP’ again to exit the SETUP Menu.
Figure 4. Main SETUP Menu Screen
1) Select ‘GENERAL SETUP’ using the Left /Right buttons, then
press ‘ENTER’ to enter the GENERAL Setup screen.
Figure 5. General SETUP Menu Screen
a)Select “SPDIF Output RAW” use this option to select the audio
signal output from”Coaxial”port.
* SPDIF OFF: the digital signal Audio output will be off.
* SPDIF/RAW: the signal output from “COAXIAL” is RAW.
* SPDIF/PCM: the signal output from “COAXIAL” is PCM.
b)Select TV DISPLAY using UP/DOWN, and then press RIGHT
to enter the submenu. Select the TV display mode on the
screen using UP/DOWN, and press ENTER to confirm the
setting. Press LEFT to return.
* NORMAL/PS: When the player is connected to a normal
TV, and a wide picture is shown on the full screen.
* NORMAL/LB: When the player is connected to a normal TV,
.. General Setup Page ..
Go To General Setup Page
SPDIF Output RAW
Angle Mark Off
TV Display PS
Screen Saver Off
Last Memory Off
.. General Setup Page ..
SPDIF Output RAW
Angle Mark Off
TV Display PS
Screen Saver Off
Last Memory Off
SPDIF Off
SPDIF/RAW
SPDIF/PCM
Setup SPDIF

9
and a wide picture is shown on the screen with a black strip
at both the top and bottom of the screen.
* WIDE: When the player is connected to a wide screen TV, a
wide picture is shown on the full screen.
Figure 6. TV DISPLAY Screen Display
c). Select‘ANGLEMARK’usingUP/DOWN,andthenpress
the RIGHT button to enter the submenu. Choose Angle
Mark on or off displayed on the screen using the UP/DOWN
and then press ENTER to confirm the setting. Press the
LEFT button to return.
Figure 7. ANGLE MARK Screen Display
* ON: The screen will show angle mark.
(*If angle option is available)
OFF: The screen will not display the Angle Mark
d). Select ‘SCREEN SAVER’ using UP/DOWN key,
Figure 8. SCREEN SAVER Display
.. General Setup Page ..
Set TV Display Mode
SPDIF Output RAW
Angle Mark Off
TV Display PS
Screen Saver Off
Last Memory Off
Nomal/PS
Normal/LB
Wide
.. General Setup Page ..
Set Angle Mark
SPDIF Output RAW
Angle Mark Off
TV Display PS
Screen Saver Off
Last Memory Off
On
Off
.. General Setup Page ..
Screen Saver
SPDIF Output RAW
Angle Mark Off
TV Display PS
Screen Saver Off
Last Memory Off
On
Off

10
*ON: screen saver on.
*OFF: screen saver off.
*NOTEThe DVD player will enter the Screen Saver mode after 5
minutes if the image on the screen remains the same formorethan5
minutes.
e). Select “ Last Memory’ by Up/Down button
Figure 9. LAST MEMORY Screen Display
*on: The unit will retain the last position of playback in
memory. This feature is cancelled when power is turned off.
*off: The unit will not retain the last position of playback.
2)Select“Videoquality”setupbyusingtheleft/rightbuttons,press
enter to enter the video quality set up page.
Figure 10. Main SETUP Menu VIDEO QUALITY
a).Select “Brightness by using the Up/Down buttons,then press
“Enter”. Adjust can change the Brightness by pressing the
left/right arrow buttons. When complete, press “Enter”
again to return to the “Video Quality” set up page.
.. Video Quality Setup ..
Go To Video Setup Page
Brightness
Hue
Contrast
Saturation 00
00
00
00
.. General Setup Page ..
Set Last Memory STATE
SPDIF Output RAW
Angle Mark Off
TV Display PS
Screen Saver Off
Last Memory Off On
Off

11
.. Video Quality Setup ..
Brightness
Hue
Contrast
Saturation 00
-05
00
00
Contrast
.. Video Quality Setup ..
Brightness
Hue
Contrast
Saturation 00
-05
00
00
Hue
.. Video Quality Setup ..
Brightness
Hue
Contrast
Saturation 00
00
00
00
Brightness
Figure 11. BRIGHTNESS Screen Display
b). Select “Contrast” using the Up/Down buttons, then press
“Enter”. You can adjust the Contrast using the left/right but-
tons.
Figure 12. CONTRAST Screen Display
When complete, press “Enter” again return to the”Video Qual-
ity” setup page.
c). Select “Hue” using the Up/Down buttons, then press Enter”.
You can adjust the Hue using the left/right buttons.
Figure 13. HUE Screen Display
When complete press “Enter” again to return to the “Video
Quality” setup page.
d). Select “Saturation” using the Up/Down buttons, then press
“Enter”. You can adjust the Saturation by using the left/right
buttons.

12
Figure 14. SATURATION Screen Display
When complete, press “Enter”again to return to the “Video
Quality” setup page.
e) Press Setup button to exit “Video Quality” setup page.
3). With no disc in the player, select “password” using the left/
right buttons; then press Enter to enter the “Change Pass
word” page.
Figure 15. PASSWORD CHANGE Screen Display
a) Press the right shift button to enter the Password Change
Submenu. Input the Old Password or the Default Password,
the New Password, and the Confirmed New Password.
Press ‘ENTER’ to confirm the change.
b) Press Setup button to exit “Video Quality” setup page.
Figure 16. PREFERENCE PAGE Screen Display
.. Video Quality Setup ..
Brightness
Hue
Contrast
Saturation 00
-05
00
00
Saturation
.. Password Setup Page ..
Password
Change Password
Change
New Password
Old Password
ConfirmPassword
OK

13
4).With no disc in the player, select ‘PREFERENCES’ using the
left/right buttons; then press ‘ENTER’ to enter the preferences
page.
Figure 17. AUDIO Preference Screen Display
a. Select ‘AUDIO’ using UP/DOWN, then press ‘RIGHT’
to enter the submenu. Select the audio language you desire
using UP/DOWN, then press ‘ENTER’ to confirm the
setting. Then press LEFT to return.
b. Select ‘SUBTITLE’ using UP/DOWN, then press RIGHT
to enter the submenu. Select the desired subtitle language or
SUBTITLE OFF using UP/DOWN, then press ‘ENTER’
to confirm the setting. Press ‘LEFT’ to return.
Figure 18. SUBTITLE Preference Screen Display
.. Preference Page ..
Preferred Audio Language
Audio
Disc Menu
Subtitle
Parental
ENG
ENG
ENG
Default
Engliash
French
Chinese
Japanese
.. Preference Page ..
Preferred Subtitle Language
Audio
Disc Menu
Subtitle
Parental
ENG
ENG
ENG
Default
Engliash
French
Chinese
Japanese
Off
NOTE:The Default Password is 3308. This password is always
effective even after you have selected your own
password and changed it. To avoid the possibility of
others using the default password to set the parental level
and change the password, you can record this default
password in another area and delete it from this manual.
Some discs can be limited depending on the age of users
while some discs can not.

14
c. Select ‘DISC MENU’ using UP/DOWN, then press ‘RIGHT’
to enter the submenu. Select the Disc Menu Language you
desire using UP/DOWN, then press ‘ENTER’ to confirm the
setting. Press ‘LEFT’ to return.
Figure 19. DISC MENU Preference Screen Display
Note:Language and subtitle selection is only available for discs
that are recorded in the above listed languages. If the selected,
language is not available, the player will play and display on the
screen the original recorded language contained in the disc.
d. Select ‘PARENTAL’ using UP/DOWN, then press RIGHT
to enter the submenu.
Figure 20. PARENTAL Preference Screen Display
SelecttheparentallevelyoudesireusingUP/DOWNfordiscs
withlock-outfunctionormultipleratinglevels.Thesearelisted
from the lowest level (1 Child) to the highest level (OFF).
.. Preference Page ..
Set Parental Control
Audio
Disc Menu
Subtitle
Parental
ENG
ENG
ENG
3 PG
4 PG 13
6 R
7 Nc17
1 KID SAF
2 G
8 ADULT
Default
.. Preference Page ..
Preferred Menu Language
Audio
Disc Menu
Subtitle
Parental
ENG
ENG
ENG
Default
Engliash
French
Chinese
Japanese

15
Figure 21. DEFAULT RESET Screen Display
Enter a 4 digit password, then press ‘ENTER’ to confirm the
parental level setting.
NOTE:For 1st time use the default password is 3308.
Figure 22. PASSWORD VERIFY Input Screen Display
.. Preference Page ..
Load Factory Language
Audio
Disc Menu
Subtitle
Parental
ENG
ENG
ENG
Parental RESET
.. Password Setup Page ..
Password
Go To Password Setup Page
NOTE: Level 8 (Adult) is the default.
e. Select ‘DEFAULTS’ using UP/DOWN, then press RIGHT to
enter the submenu. Press ENTER to make the setting return
to the factory-set mode.
NOTE: The parental setting is not affected by the default
function.

1.Basic Operation
Turn the unit on/off
Remove/load the disc
Start Play/Execute item or setting
Play at 1/2, 1/4, 1/8 or 1/16 times speed
Still Picture
(1 time) Stop at the present playing point /
(2 times) Stop playing
Go to the next chapter, track or scene dur-
ing play back
Go back to the preceding chapter, track or
scene during play back
Scan forward at 2, 4, 8,16 or 32x times
speed
Scan backward at 2, 4, 8, 16 or 32x times
speed
Used for Menu Navigation
Execute item or setting
Select item or setting
Return
Display the root menu of the disc
Repeat playing title, chapter, or track
RepeataspecificportionfrompointAtopoint
B of the disc
Display information (title, chapter, track,
time, etc.).
Change the angles on the scene
Select the subtitle language and turn it on/
off
Select the audio language
Enlarge an image to 2, 3, or 4 times the
original
Display the setup menu to select and set
items, and exit the setup menu.
POWER
OPEN
PLAY
SLOW
PAUSE
STOP
NEXT
PREVIOUS
FORWARD
REVERSE
UP/DOWN/LEFT /RIGHT
ENTER
NUMBERS
RETURN
MENU
REPEAT
A-B
DISPLAY
ANGLE
SUBTITLE
AUDIO
ZOOM
SETUP
16

2. MENU
A DVD is divided into sections called titles and chapters. When
you play a DVD, a root menu of the disc will appear on the screen
of your TV or Monitor. The contents of the menu vary from disc to
disc. Press MENU during playback to display the menu, and press
ENTER or PLAY to start playing. Some DVDs only allow you to
select disc playback options using the DVD menu.
3. DISPLAY(Display contents vary from disc to disc.)
1) PLAYING TIMEAND REMAINING TIME
a. During playback press ‘DISPLAY’ to display the current Title
Number (1), the total Number of Titles (2), the current Chapter
Number (3), the total Number of Chapters (4), and the Playing
Time for the title (5). The heading will disappear automatically
after 3 seconds if no buttons are pressed.
b. Press ‘DISPLAY’ again to display the Remaining Time of the
title. The heading will disappear automatically in about 3
seconds.
Figure 24. Title Remaining Time Screen Display
Figure 23. Title, Chapter Number, and Time Screen Display
17

18
c. Press ‘DISPLAY’ the 3rd time to display the Elapsed Time for
the chapter. The heading will disappear automatically in about
3 seconds.
d. Press ‘DISPLAY’ the 4th time to display the Remaining Time for
the chapter. The heading will disappear automatically after 3
seconds.
e. Press ‘DISPLAY’ a 5th time to exit. ‘DISPLAY OFF’ will be
displayed and will disappear automatically after 3 seconds.
2) ANGLE
During playback of a disc, press ‘ANGLE’ to display the avail
able angles for discs containing multi-angles*, with the current
angle number (1) and the total number of angles (2) displaying.
Press ‘ANGLE’ to select another angle, then press again to exit
and return to the normal viewing angle. The angle display will
disappear automatically if the ‘ANGLE’ button is not pressed
again within 3 seconds.
*NOTE: Not all discs contain this feature
Figure 25. Chapter Elapsed Time Screen Display
Figure 26. Chapter Remaining Time Screen Display

19
3) SUBTITLE
Duringdiscplaybackpress‘SUBTITLE’toselectthesubtitlelan-
guage you desire*, with the current Subtitle Language Number
(1) and the total Number of Subtitle Languages (2) displayed. If
there are multiple languages press ‘SUBTITLE’ again to select
anothersubtitle language. ToturnsubtitlesOFF, press the‘SUB-
TITLE’ button until ‘SUBTITLE OFF’ is displayed. The Subtitle
display will disappear automatically if the ‘SUBTITLE’ button is
not pressed again within 3 seconds.
Figure 27. Angle Screen Display
Figure 28. Subtitle Screen Display
*Some DVDs only allow access to this function through the DVD menu.

20
4)AUDIO
During playback press ‘AUDIO’ to select the audio language you
desire*, with the currentAudioChannelNumber(1)andthetotal
number of AudioChannels (2) displayed. Press AUDIO again to
select another audio language. The audio display will disappear
automatically if the ‘AUDIO’ button is not pressed again for 3
seconds.
Figure 29 Audio Language Screen Display
* Some DVDs only allow access to this function through the
DVD menu.
5) ZOOM
Duringplayback press ‘ZOOM’ toenlarge thepictureby 2x, 3x or
4X with the current zoom multiple. (1) Press “zoom” once; the
picture will be enlarged 2X. (2) Press “zoom” a second time; the
picture will be enlarged 3X. (3) Press “zoom”a 3rd time; the pic-
ture will be enlarged 4X. (4) Press “zoom” a 4th time, the picture
will return to normal.
Figure 30. ZOOM Screen Display