AURATON Pulse User manual

RF frequency: 868,300 MHz 11 dBm ERP
868,150 MHz 11 dBm ERP
868,450 MHz 11 dBm ERP
869,800 MHz 11 dBm ERP
433,950 MHz 10 dBm ERP
Input rang: 5V
Energy usage: 3W approx
Warranty: 2 year standard warranty
Radio receiver category: 2 Old electrical appliances must not be disposed of together
with residual waste, but have to be disposed of separately. The
disposal at the communal collecng point via private persons
is for free. The owner of old appliances is responsible to bring
the appliances to these collecng points or to similar collecon
points. With this lile personal eort, you contribute to recycle
valuable raw materials and the treatment of toxic substances.
Hereby, LARS Andrzej Szymański declares that the radio
equipment type AURATON PULSE L2 is in compliance with
Direcve 2014/53/EU and 2011/65/EU. The
full text of the EU declaraon of conformity
is available at the following internet address:
hps://manuals.auraton.pl
Specicaon
Environmentally friendly disposal
EU Declaraon of Conformity
Range and posion in your home
Control while you’re away
Expanding your system
Smartphone
AURATON SMART device
Router
Let’s go!
All you need is a standard home WiFi router
with a broadband connecon, a WiFi enabled
device such as smartphone, tablet or PC and
AURATON SMART devices to control.
To funcon AURATON PULSE requires
a permanent Internet connecon.
Take the Ethernet connector cable
(supplied) and connect it to any spare
available LAN port on your wireless router.
Connect the other end of the cable to the
AURATON PULSE single port.
Plug in the power supply and push the
jack plug into the Micro USB connector on
the back of the AURATON PULSE. Turn on
the power supply. The green LED on the
AURATON PULSE will illuminate to indicate
that the Pulse has power and is ready to
be set up from the AURATON SMART App.
The LED indicators are used to indicate the
status of the Pulse and to indicate if there is
a problem. If there is a problem reported,
it will usually refer to an insecure cable
connecon or a server connecon problem.
If it has been set up correctly, the App will
display details of any specic problem.
A single AURATON PULSE covers a typical large house
and should outperform standard WiFi routers. To ensure
the best performance, try not to posion the gateway
next to radiators, water tanks or very thick walls. Sing
AURATON PULSE as high up as possible within your
home (e.g. on the rst oor) will always provide the best
coverage.
You can control AURATON devices whilst away from
home using your app. You can also use mers and events
to schedule devices to work automacally at mes that
you set in the app.
AURATON is very exible, and you can add new AURATON
devices to your system at any me. You can also add new
friends and family members to your network by adding
them using the app.
Let’s get started
Getting started
Attach the
ethernet cable
Attach the
power supply
1
2
What do I need?
Hints and tips 3
1
2
Steady green: Status normal
Flashing green: Transming
Flashing green / amber: Linking mode
Steady red: Cannot contact server
Flashing red: Cable / router problem
LED Indicator Lights
Download and
start Auraton
Smart app
3
Need some help?
Find support and troubleshoong
online or give us a call and we’ll be
happy to help you get started.
Note: The following procedure permanently
deletes all data, added devices and user
accounts.
To restore factory sengs of the AURATON
PULSE gateway, please, do the following:
1. Disconnect the AURATON PULSE from the
power supply.
2. Press and hold the buon on the housing
and connect the AURATON PULSE to the
power source.
3. Wait few seconds unl the LED lights up
orange and release the buon, then press
it again.
4. Wait unl LED change its colour to green.
Restoring the factory sengs
www.auratonsmart.com
[e-mail]
Once your AURATON PULSE is set up,
you will be able to register mulple
smartphones or tablets to control any
number of AURATON devices in your
home.
Pulse
Quick Start Guide
ver 20200122
The extended instrucon can be found at:
hps://manuals.auraton.pl
Owner’s manual

RF frequency: 868,300 MHz 11 dBm ERP
868,150 MHz 11 dBm ERP
868,450 MHz 11 dBm ERP
869,800 MHz 11 dBm ERP
433,950 MHz 10 dBm ERP
Input rang: 5V
Energy usage: 3W approx
Warranty: 2 year standard warranty
Radio receiver category: 2 Old electrical appliances must not be disposed of together
with residual waste, but have to be disposed of separately. The
disposal at the communal collecng point via private persons
is for free. The owner of old appliances is responsible to bring
the appliances to these collecng points or to similar collecon
points. With this lile personal eort, you contribute to recycle
valuable raw materials and the treatment of toxic substances.
Hereby, LARS Andrzej Szymański declares that the radio
equipment type AURATON PULSE L2 is in compliance with
Direcve 2014/53/EU and 2011/65/EU. The
full text of the EU declaraon of conformity
is available at the following internet address:
hps://manuals.auraton.pl
Specicaon
Environmentally friendly disposal
EU Declaraon of Conformity
Range and posion in your home
Control while you’re away
Expanding your system
Smartphone
AURATON SMART device
Router
Let’s go!
All you need is a standard home WiFi router
with a broadband connecon, a WiFi enabled
device such as smartphone, tablet or PC and
AURATON SMART devices to control.
To funcon AURATON PULSE requires
a permanent Internet connecon.
Take the Ethernet connector cable
(supplied) and connect it to any spare
available LAN port on your wireless router.
Connect the other end of the cable to the
AURATON PULSE single port.
Plug in the power supply and push the
jack plug into the Micro USB connector on
the back of the AURATON PULSE. Turn on
the power supply. The green LED on the
AURATON PULSE will illuminate to indicate
that the Pulse has power and is ready to
be set up from the AURATON SMART App.
The LED indicators are used to indicate the
status of the Pulse and to indicate if there is
a problem. If there is a problem reported,
it will usually refer to an insecure cable
connecon or a server connecon problem.
If it has been set up correctly, the App will
display details of any specic problem.
A single AURATON PULSE covers a typical large house
and should outperform standard WiFi routers. To ensure
the best performance, try not to posion the gateway
next to radiators, water tanks or very thick walls. Sing
AURATON PULSE as high up as possible within your
home (e.g. on the rst oor) will always provide the best
coverage.
You can control AURATON devices whilst away from
home using your app. You can also use mers and events
to schedule devices to work automacally at mes that
you set in the app.
AURATON is very exible, and you can add new AURATON
devices to your system at any me. You can also add new
friends and family members to your network by adding
them using the app.
Let’s get started
Getting started
Attach the
ethernet cable
Attach the
power supply
1
2
What do I need?
Hints and tips 3
1
2
Steady green: Status normal
Flashing green: Transming
Flashing green / amber: Linking mode
Steady red: Cannot contact server
Flashing red: Cable / router problem
LED Indicator Lights
Download and
start Auraton
Smart app
3
Need some help?
Find support and troubleshoong
online or give us a call and we’ll be
happy to help you get started.
Note: The following procedure permanently
deletes all data, added devices and user
accounts.
To restore factory sengs of the AURATON
PULSE gateway, please, do the following:
1. Disconnect the AURATON PULSE from the
power supply.
2. Press and hold the buon on the housing
and connect the AURATON PULSE to the
power source.
3. Wait few seconds unl the LED lights up
orange and release the buon, then press
it again.
4. Wait unl LED change its colour to green.
Restoring the factory sengs
www.auratonsmart.com
[e-mail]
Once your AURATON PULSE is set up,
you will be able to register mulple
smartphones or tablets to control any
number of AURATON devices in your
home.
Pulse
Quick Start Guide
ver 20200122
The extended instrucon can be found at:
hps://manuals.auraton.pl
Owner’s manual

RF frequency: 868,300 MHz 11 dBm ERP
868,150 MHz 11 dBm ERP
868,450 MHz 11 dBm ERP
869,800 MHz 11 dBm ERP
433,950 MHz 10 dBm ERP
Input rang: 5V
Energy usage: 3W approx
Warranty: 2 year standard warranty
Radio receiver category: 2 Old electrical appliances must not be disposed of together
with residual waste, but have to be disposed of separately. The
disposal at the communal collecng point via private persons
is for free. The owner of old appliances is responsible to bring
the appliances to these collecng points or to similar collecon
points. With this lile personal eort, you contribute to recycle
valuable raw materials and the treatment of toxic substances.
Hereby, LARS Andrzej Szymański declares that the radio
equipment type AURATON PULSE L2 is in compliance with
Direcve 2014/53/EU and 2011/65/EU. The
full text of the EU declaraon of conformity
is available at the following internet address:
hps://manuals.auraton.pl
Specicaon
Environmentally friendly disposal
EU Declaraon of Conformity
Range and posion in your home
Control while you’re away
Expanding your system
Smartphone
AURATON SMART device
Router
Let’s go!
All you need is a standard home WiFi router
with a broadband connecon, a WiFi enabled
device such as smartphone, tablet or PC and
AURATON SMART devices to control.
To funcon AURATON PULSE requires
a permanent Internet connecon.
Take the Ethernet connector cable
(supplied) and connect it to any spare
available LAN port on your wireless router.
Connect the other end of the cable to the
AURATON PULSE single port.
Plug in the power supply and push the
jack plug into the Micro USB connector on
the back of the AURATON PULSE. Turn on
the power supply. The green LED on the
AURATON PULSE will illuminate to indicate
that the Pulse has power and is ready to
be set up from the AURATON SMART App.
The LED indicators are used to indicate the
status of the Pulse and to indicate if there is
a problem. If there is a problem reported,
it will usually refer to an insecure cable
connecon or a server connecon problem.
If it has been set up correctly, the App will
display details of any specic problem.
A single AURATON PULSE covers a typical large house
and should outperform standard WiFi routers. To ensure
the best performance, try not to posion the gateway
next to radiators, water tanks or very thick walls. Sing
AURATON PULSE as high up as possible within your
home (e.g. on the rst oor) will always provide the best
coverage.
You can control AURATON devices whilst away from
home using your app. You can also use mers and events
to schedule devices to work automacally at mes that
you set in the app.
AURATON is very exible, and you can add new AURATON
devices to your system at any me. You can also add new
friends and family members to your network by adding
them using the app.
Let’s get started
Getting started
Attach the
ethernet cable
Attach the
power supply
1
2
What do I need?
Hints and tips 3
1
2
Steady green: Status normal
Flashing green: Transming
Flashing green / amber: Linking mode
Steady red: Cannot contact server
Flashing red: Cable / router problem
LED Indicator Lights
Download and
start Auraton
Smart app
3
Need some help?
Find support and troubleshoong
online or give us a call and we’ll be
happy to help you get started.
Note: The following procedure permanently
deletes all data, added devices and user
accounts.
To restore factory sengs of the AURATON
PULSE gateway, please, do the following:
1. Disconnect the AURATON PULSE from the
power supply.
2. Press and hold the buon on the housing
and connect the AURATON PULSE to the
power source.
3. Wait few seconds unl the LED lights up
orange and release the buon, then press
it again.
4. Wait unl LED change its colour to green.
Restoring the factory sengs
www.auratonsmart.com
[e-mail]
Once your AURATON PULSE is set up,
you will be able to register mulple
smartphones or tablets to control any
number of AURATON devices in your
home.
Pulse
Quick Start Guide
ver 20200122
The extended instrucon can be found at:
hps://manuals.auraton.pl
Owner’s manual

RF frequency: 868,300 MHz 11 dBm ERP
868,150 MHz 11 dBm ERP
868,450 MHz 11 dBm ERP
869,800 MHz 11 dBm ERP
433,950 MHz 10 dBm ERP
Input rang: 5V
Energy usage: 3W approx
Warranty: 2 year standard warranty
Radio receiver category: 2 Old electrical appliances must not be disposed of together
with residual waste, but have to be disposed of separately. The
disposal at the communal collecng point via private persons
is for free. The owner of old appliances is responsible to bring
the appliances to these collecng points or to similar collecon
points. With this lile personal eort, you contribute to recycle
valuable raw materials and the treatment of toxic substances.
Hereby, LARS Andrzej Szymański declares that the radio
equipment type AURATON PULSE L2 is in compliance with
Direcve 2014/53/EU and 2011/65/EU. The
full text of the EU declaraon of conformity
is available at the following internet address:
hps://manuals.auraton.pl
Specicaon
Environmentally friendly disposal
EU Declaraon of Conformity
Range and posion in your home
Control while you’re away
Expanding your system
Smartphone
AURATON SMART device
Router
Let’s go!
All you need is a standard home WiFi router
with a broadband connecon, a WiFi enabled
device such as smartphone, tablet or PC and
AURATON SMART devices to control.
To funcon AURATON PULSE requires
a permanent Internet connecon.
Take the Ethernet connector cable
(supplied) and connect it to any spare
available LAN port on your wireless router.
Connect the other end of the cable to the
AURATON PULSE single port.
Plug in the power supply and push the
jack plug into the Micro USB connector on
the back of the AURATON PULSE. Turn on
the power supply. The green LED on the
AURATON PULSE will illuminate to indicate
that the Pulse has power and is ready to
be set up from the AURATON SMART App.
The LED indicators are used to indicate the
status of the Pulse and to indicate if there is
a problem. If there is a problem reported,
it will usually refer to an insecure cable
connecon or a server connecon problem.
If it has been set up correctly, the App will
display details of any specic problem.
A single AURATON PULSE covers a typical large house
and should outperform standard WiFi routers. To ensure
the best performance, try not to posion the gateway
next to radiators, water tanks or very thick walls. Sing
AURATON PULSE as high up as possible within your
home (e.g. on the rst oor) will always provide the best
coverage.
You can control AURATON devices whilst away from
home using your app. You can also use mers and events
to schedule devices to work automacally at mes that
you set in the app.
AURATON is very exible, and you can add new AURATON
devices to your system at any me. You can also add new
friends and family members to your network by adding
them using the app.
Let’s get started
Getting started
Attach the
ethernet cable
Attach the
power supply
1
2
What do I need?
Hints and tips 3
1
2
Steady green: Status normal
Flashing green: Transming
Flashing green / amber: Linking mode
Steady red: Cannot contact server
Flashing red: Cable / router problem
LED Indicator Lights
Download and
start Auraton
Smart app
3
Need some help?
Find support and troubleshoong
online or give us a call and we’ll be
happy to help you get started.
Note: The following procedure permanently
deletes all data, added devices and user
accounts.
To restore factory sengs of the AURATON
PULSE gateway, please, do the following:
1. Disconnect the AURATON PULSE from the
power supply.
2. Press and hold the buon on the housing
and connect the AURATON PULSE to the
power source.
3. Wait few seconds unl the LED lights up
orange and release the buon, then press
it again.
4. Wait unl LED change its colour to green.
Restoring the factory sengs
www.auratonsmart.com
[e-mail]
Once your AURATON PULSE is set up,
you will be able to register mulple
smartphones or tablets to control any
number of AURATON devices in your
home.
Pulse
Quick Start Guide
ver 20200122
The extended instrucon can be found at:
hps://manuals.auraton.pl
Owner’s manual

RF frequency: 868,300 MHz 11 dBm ERP
868,150 MHz 11 dBm ERP
868,450 MHz 11 dBm ERP
869,800 MHz 11 dBm ERP
433,950 MHz 10 dBm ERP
Input rang: 5V
Energy usage: 3W approx
Warranty: 2 year standard warranty
Radio receiver category: 2 Old electrical appliances must not be disposed of together
with residual waste, but have to be disposed of separately. The
disposal at the communal collecng point via private persons
is for free. The owner of old appliances is responsible to bring
the appliances to these collecng points or to similar collecon
points. With this lile personal eort, you contribute to recycle
valuable raw materials and the treatment of toxic substances.
Hereby, LARS Andrzej Szymański declares that the radio
equipment type AURATON PULSE L2 is in compliance with
Direcve 2014/53/EU and 2011/65/EU. The
full text of the EU declaraon of conformity
is available at the following internet address:
hps://manuals.auraton.pl
Specicaon
Environmentally friendly disposal
EU Declaraon of Conformity
Range and posion in your home
Control while you’re away
Expanding your system
Smartphone
AURATON SMART device
Router
Let’s go!
All you need is a standard home WiFi router
with a broadband connecon, a WiFi enabled
device such as smartphone, tablet or PC and
AURATON SMART devices to control.
To funcon AURATON PULSE requires
a permanent Internet connecon.
Take the Ethernet connector cable
(supplied) and connect it to any spare
available LAN port on your wireless router.
Connect the other end of the cable to the
AURATON PULSE single port.
Plug in the power supply and push the
jack plug into the Micro USB connector on
the back of the AURATON PULSE. Turn on
the power supply. The green LED on the
AURATON PULSE will illuminate to indicate
that the Pulse has power and is ready to
be set up from the AURATON SMART App.
The LED indicators are used to indicate the
status of the Pulse and to indicate if there is
a problem. If there is a problem reported,
it will usually refer to an insecure cable
connecon or a server connecon problem.
If it has been set up correctly, the App will
display details of any specic problem.
A single AURATON PULSE covers a typical large house
and should outperform standard WiFi routers. To ensure
the best performance, try not to posion the gateway
next to radiators, water tanks or very thick walls. Sing
AURATON PULSE as high up as possible within your
home (e.g. on the rst oor) will always provide the best
coverage.
You can control AURATON devices whilst away from
home using your app. You can also use mers and events
to schedule devices to work automacally at mes that
you set in the app.
AURATON is very exible, and you can add new AURATON
devices to your system at any me. You can also add new
friends and family members to your network by adding
them using the app.
Let’s get started
Getting started
Attach the
ethernet cable
Attach the
power supply
1
2
What do I need?
Hints and tips 3
1
2
Steady green: Status normal
Flashing green: Transming
Flashing green / amber: Linking mode
Steady red: Cannot contact server
Flashing red: Cable / router problem
LED Indicator Lights
Download and
start Auraton
Smart app
3
Need some help?
Find support and troubleshoong
online or give us a call and we’ll be
happy to help you get started.
Note: The following procedure permanently
deletes all data, added devices and user
accounts.
To restore factory sengs of the AURATON
PULSE gateway, please, do the following:
1. Disconnect the AURATON PULSE from the
power supply.
2. Press and hold the buon on the housing
and connect the AURATON PULSE to the
power source.
3. Wait few seconds unl the LED lights up
orange and release the buon, then press
it again.
4. Wait unl LED change its colour to green.
Restoring the factory sengs
www.auratonsmart.com
[e-mail]
Once your AURATON PULSE is set up,
you will be able to register mulple
smartphones or tablets to control any
number of AURATON devices in your
home.
Pulse
Quick Start Guide
ver 20200122
The extended instrucon can be found at:
hps://manuals.auraton.pl
Owner’s manual

RF frequency: 868,300 MHz 11 dBm ERP
868,150 MHz 11 dBm ERP
868,450 MHz 11 dBm ERP
869,800 MHz 11 dBm ERP
433,950 MHz 10 dBm ERP
Input rang: 5V
Energy usage: 3W approx
Warranty: 2 year standard warranty
Radio receiver category: 2 Old electrical appliances must not be disposed of together
with residual waste, but have to be disposed of separately. The
disposal at the communal collecng point via private persons
is for free. The owner of old appliances is responsible to bring
the appliances to these collecng points or to similar collecon
points. With this lile personal eort, you contribute to recycle
valuable raw materials and the treatment of toxic substances.
Hereby, LARS Andrzej Szymański declares that the radio
equipment type AURATON PULSE L2 is in compliance with
Direcve 2014/53/EU and 2011/65/EU. The
full text of the EU declaraon of conformity
is available at the following internet address:
hps://manuals.auraton.pl
Specicaon
Environmentally friendly disposal
EU Declaraon of Conformity
Range and posion in your home
Control while you’re away
Expanding your system
Smartphone
AURATON SMART device
Router
Let’s go!
All you need is a standard home WiFi router
with a broadband connecon, a WiFi enabled
device such as smartphone, tablet or PC and
AURATON SMART devices to control.
To funcon AURATON PULSE requires
a permanent Internet connecon.
Take the Ethernet connector cable
(supplied) and connect it to any spare
available LAN port on your wireless router.
Connect the other end of the cable to the
AURATON PULSE single port.
Plug in the power supply and push the
jack plug into the Micro USB connector on
the back of the AURATON PULSE. Turn on
the power supply. The green LED on the
AURATON PULSE will illuminate to indicate
that the Pulse has power and is ready to
be set up from the AURATON SMART App.
The LED indicators are used to indicate the
status of the Pulse and to indicate if there is
a problem. If there is a problem reported,
it will usually refer to an insecure cable
connecon or a server connecon problem.
If it has been set up correctly, the App will
display details of any specic problem.
A single AURATON PULSE covers a typical large house
and should outperform standard WiFi routers. To ensure
the best performance, try not to posion the gateway
next to radiators, water tanks or very thick walls. Sing
AURATON PULSE as high up as possible within your
home (e.g. on the rst oor) will always provide the best
coverage.
You can control AURATON devices whilst away from
home using your app. You can also use mers and events
to schedule devices to work automacally at mes that
you set in the app.
AURATON is very exible, and you can add new AURATON
devices to your system at any me. You can also add new
friends and family members to your network by adding
them using the app.
Let’s get started
Getting started
Attach the
ethernet cable
Attach the
power supply
1
2
What do I need?
Hints and tips 3
1
2
Steady green: Status normal
Flashing green: Transming
Flashing green / amber: Linking mode
Steady red: Cannot contact server
Flashing red: Cable / router problem
LED Indicator Lights
Download and
start Auraton
Smart app
3
Need some help?
Find support and troubleshoong
online or give us a call and we’ll be
happy to help you get started.
Note: The following procedure permanently
deletes all data, added devices and user
accounts.
To restore factory sengs of the AURATON
PULSE gateway, please, do the following:
1. Disconnect the AURATON PULSE from the
power supply.
2. Press and hold the buon on the housing
and connect the AURATON PULSE to the
power source.
3. Wait few seconds unl the LED lights up
orange and release the buon, then press
it again.
4. Wait unl LED change its colour to green.
Restoring the factory sengs
www.auratonsmart.com
[e-mail]
Once your AURATON PULSE is set up,
you will be able to register mulple
smartphones or tablets to control any
number of AURATON devices in your
home.
Pulse
Quick Start Guide
ver 20200122
The extended instrucon can be found at:
hps://manuals.auraton.pl
Owner’s manual

RF frequency: 868,300 MHz 11 dBm ERP
868,150 MHz 11 dBm ERP
868,450 MHz 11 dBm ERP
869,800 MHz 11 dBm ERP
433,950 MHz 10 dBm ERP
Input rang: 5V
Energy usage: 3W approx
Warranty: 2 year standard warranty
Radio receiver category: 2 Old electrical appliances must not be disposed of together
with residual waste, but have to be disposed of separately. The
disposal at the communal collecng point via private persons
is for free. The owner of old appliances is responsible to bring
the appliances to these collecng points or to similar collecon
points. With this lile personal eort, you contribute to recycle
valuable raw materials and the treatment of toxic substances.
Hereby, LARS Andrzej Szymański declares that the radio
equipment type AURATON PULSE L2 is in compliance with
Direcve 2014/53/EU and 2011/65/EU. The
full text of the EU declaraon of conformity
is available at the following internet address:
hps://manuals.auraton.pl
Specicaon
Environmentally friendly disposal
EU Declaraon of Conformity
Range and posion in your home
Control while you’re away
Expanding your system
Smartphone
AURATON SMART device
Router
Let’s go!
All you need is a standard home WiFi router
with a broadband connecon, a WiFi enabled
device such as smartphone, tablet or PC and
AURATON SMART devices to control.
To funcon AURATON PULSE requires
a permanent Internet connecon.
Take the Ethernet connector cable
(supplied) and connect it to any spare
available LAN port on your wireless router.
Connect the other end of the cable to the
AURATON PULSE single port.
Plug in the power supply and push the
jack plug into the Micro USB connector on
the back of the AURATON PULSE. Turn on
the power supply. The green LED on the
AURATON PULSE will illuminate to indicate
that the Pulse has power and is ready to
be set up from the AURATON SMART App.
The LED indicators are used to indicate the
status of the Pulse and to indicate if there is
a problem. If there is a problem reported,
it will usually refer to an insecure cable
connecon or a server connecon problem.
If it has been set up correctly, the App will
display details of any specic problem.
A single AURATON PULSE covers a typical large house
and should outperform standard WiFi routers. To ensure
the best performance, try not to posion the gateway
next to radiators, water tanks or very thick walls. Sing
AURATON PULSE as high up as possible within your
home (e.g. on the rst oor) will always provide the best
coverage.
You can control AURATON devices whilst away from
home using your app. You can also use mers and events
to schedule devices to work automacally at mes that
you set in the app.
AURATON is very exible, and you can add new AURATON
devices to your system at any me. You can also add new
friends and family members to your network by adding
them using the app.
Let’s get started
Getting started
Attach the
ethernet cable
Attach the
power supply
1
2
What do I need?
Hints and tips 3
1
2
Steady green: Status normal
Flashing green: Transming
Flashing green / amber: Linking mode
Steady red: Cannot contact server
Flashing red: Cable / router problem
LED Indicator Lights
Download and
start Auraton
Smart app
3
Need some help?
Find support and troubleshoong
online or give us a call and we’ll be
happy to help you get started.
Note: The following procedure permanently
deletes all data, added devices and user
accounts.
To restore factory sengs of the AURATON
PULSE gateway, please, do the following:
1. Disconnect the AURATON PULSE from the
power supply.
2. Press and hold the buon on the housing
and connect the AURATON PULSE to the
power source.
3. Wait few seconds unl the LED lights up
orange and release the buon, then press
it again.
4. Wait unl LED change its colour to green.
Restoring the factory sengs
www.auratonsmart.com
[e-mail]
Once your AURATON PULSE is set up,
you will be able to register mulple
smartphones or tablets to control any
number of AURATON devices in your
home.
Pulse
Quick Start Guide
ver 20200122
The extended instrucon can be found at:
hps://manuals.auraton.pl
Owner’s manual

RF frequency: 868,300 MHz 11 dBm ERP
868,150 MHz 11 dBm ERP
868,450 MHz 11 dBm ERP
869,800 MHz 11 dBm ERP
433,950 MHz 10 dBm ERP
Input rang: 5V
Energy usage: 3W approx
Warranty: 2 year standard warranty
Radio receiver category: 2 Old electrical appliances must not be disposed of together
with residual waste, but have to be disposed of separately. The
disposal at the communal collecng point via private persons
is for free. The owner of old appliances is responsible to bring
the appliances to these collecng points or to similar collecon
points. With this lile personal eort, you contribute to recycle
valuable raw materials and the treatment of toxic substances.
Hereby, LARS Andrzej Szymański declares that the radio
equipment type AURATON PULSE L2 is in compliance with
Direcve 2014/53/EU and 2011/65/EU. The
full text of the EU declaraon of conformity
is available at the following internet address:
hps://manuals.auraton.pl
Specicaon
Environmentally friendly disposal
EU Declaraon of Conformity
Range and posion in your home
Control while you’re away
Expanding your system
Smartphone
AURATON SMART device
Router
Let’s go!
All you need is a standard home WiFi router
with a broadband connecon, a WiFi enabled
device such as smartphone, tablet or PC and
AURATON SMART devices to control.
To funcon AURATON PULSE requires
a permanent Internet connecon.
Take the Ethernet connector cable
(supplied) and connect it to any spare
available LAN port on your wireless router.
Connect the other end of the cable to the
AURATON PULSE single port.
Plug in the power supply and push the
jack plug into the Micro USB connector on
the back of the AURATON PULSE. Turn on
the power supply. The green LED on the
AURATON PULSE will illuminate to indicate
that the Pulse has power and is ready to
be set up from the AURATON SMART App.
The LED indicators are used to indicate the
status of the Pulse and to indicate if there is
a problem. If there is a problem reported,
it will usually refer to an insecure cable
connecon or a server connecon problem.
If it has been set up correctly, the App will
display details of any specic problem.
A single AURATON PULSE covers a typical large house
and should outperform standard WiFi routers. To ensure
the best performance, try not to posion the gateway
next to radiators, water tanks or very thick walls. Sing
AURATON PULSE as high up as possible within your
home (e.g. on the rst oor) will always provide the best
coverage.
You can control AURATON devices whilst away from
home using your app. You can also use mers and events
to schedule devices to work automacally at mes that
you set in the app.
AURATON is very exible, and you can add new AURATON
devices to your system at any me. You can also add new
friends and family members to your network by adding
them using the app.
Let’s get started
Getting started
Attach the
ethernet cable
Attach the
power supply
1
2
What do I need?
Hints and tips 3
1
2
Steady green: Status normal
Flashing green: Transming
Flashing green / amber: Linking mode
Steady red: Cannot contact server
Flashing red: Cable / router problem
LED Indicator Lights
Download and
start Auraton
Smart app
3
Need some help?
Find support and troubleshoong
online or give us a call and we’ll be
happy to help you get started.
Note: The following procedure permanently
deletes all data, added devices and user
accounts.
To restore factory sengs of the AURATON
PULSE gateway, please, do the following:
1. Disconnect the AURATON PULSE from the
power supply.
2. Press and hold the buon on the housing
and connect the AURATON PULSE to the
power source.
3. Wait few seconds unl the LED lights up
orange and release the buon, then press
it again.
4. Wait unl LED change its colour to green.
Restoring the factory sengs
www.auratonsmart.com
[e-mail]
Once your AURATON PULSE is set up,
you will be able to register mulple
smartphones or tablets to control any
number of AURATON devices in your
home.
Pulse
Quick Start Guide
ver 20200122
The extended instrucon can be found at:
hps://manuals.auraton.pl
Owner’s manual

RF frequency: 868,300 MHz 11 dBm ERP
868,150 MHz 11 dBm ERP
868,450 MHz 11 dBm ERP
869,800 MHz 11 dBm ERP
433,950 MHz 10 dBm ERP
Input rang: 5V
Energy usage: 3W approx
Warranty: 2 year standard warranty
Radio receiver category: 2 Old electrical appliances must not be disposed of together
with residual waste, but have to be disposed of separately. The
disposal at the communal collecng point via private persons
is for free. The owner of old appliances is responsible to bring
the appliances to these collecng points or to similar collecon
points. With this lile personal eort, you contribute to recycle
valuable raw materials and the treatment of toxic substances.
Hereby, LARS Andrzej Szymański declares that the radio
equipment type AURATON PULSE L2 is in compliance with
Direcve 2014/53/EU and 2011/65/EU. The
full text of the EU declaraon of conformity
is available at the following internet address:
hps://manuals.auraton.pl
Specicaon
Environmentally friendly disposal
EU Declaraon of Conformity
Range and posion in your home
Control while you’re away
Expanding your system
Smartphone
AURATON SMART device
Router
Let’s go!
All you need is a standard home WiFi router
with a broadband connecon, a WiFi enabled
device such as smartphone, tablet or PC and
AURATON SMART devices to control.
To funcon AURATON PULSE requires
a permanent Internet connecon.
Take the Ethernet connector cable
(supplied) and connect it to any spare
available LAN port on your wireless router.
Connect the other end of the cable to the
AURATON PULSE single port.
Plug in the power supply and push the
jack plug into the Micro USB connector on
the back of the AURATON PULSE. Turn on
the power supply. The green LED on the
AURATON PULSE will illuminate to indicate
that the Pulse has power and is ready to
be set up from the AURATON SMART App.
The LED indicators are used to indicate the
status of the Pulse and to indicate if there is
a problem. If there is a problem reported,
it will usually refer to an insecure cable
connecon or a server connecon problem.
If it has been set up correctly, the App will
display details of any specic problem.
A single AURATON PULSE covers a typical large house
and should outperform standard WiFi routers. To ensure
the best performance, try not to posion the gateway
next to radiators, water tanks or very thick walls. Sing
AURATON PULSE as high up as possible within your
home (e.g. on the rst oor) will always provide the best
coverage.
You can control AURATON devices whilst away from
home using your app. You can also use mers and events
to schedule devices to work automacally at mes that
you set in the app.
AURATON is very exible, and you can add new AURATON
devices to your system at any me. You can also add new
friends and family members to your network by adding
them using the app.
Let’s get started
Getting started
Attach the
ethernet cable
Attach the
power supply
1
2
What do I need?
Hints and tips 3
1
2
Steady green: Status normal
Flashing green: Transming
Flashing green / amber: Linking mode
Steady red: Cannot contact server
Flashing red: Cable / router problem
LED Indicator Lights
Download and
start Auraton
Smart app
3
Need some help?
Find support and troubleshoong
online or give us a call and we’ll be
happy to help you get started.
Note: The following procedure permanently
deletes all data, added devices and user
accounts.
To restore factory sengs of the AURATON
PULSE gateway, please, do the following:
1. Disconnect the AURATON PULSE from the
power supply.
2. Press and hold the buon on the housing
and connect the AURATON PULSE to the
power source.
3. Wait few seconds unl the LED lights up
orange and release the buon, then press
it again.
4. Wait unl LED change its colour to green.
Restoring the factory sengs
www.auratonsmart.com
[e-mail]
Once your AURATON PULSE is set up,
you will be able to register mulple
smartphones or tablets to control any
number of AURATON devices in your
home.
Pulse
Quick Start Guide
ver 20200122
The extended instrucon can be found at:
hps://manuals.auraton.pl
Owner’s manual

RF frequency: 868,300 MHz 11 dBm ERP
868,150 MHz 11 dBm ERP
868,450 MHz 11 dBm ERP
869,800 MHz 11 dBm ERP
433,950 MHz 10 dBm ERP
Input rang: 5V
Energy usage: 3W approx
Warranty: 2 year standard warranty
Radio receiver category: 2 Old electrical appliances must not be disposed of together
with residual waste, but have to be disposed of separately. The
disposal at the communal collecng point via private persons
is for free. The owner of old appliances is responsible to bring
the appliances to these collecng points or to similar collecon
points. With this lile personal eort, you contribute to recycle
valuable raw materials and the treatment of toxic substances.
Hereby, LARS Andrzej Szymański declares that the radio
equipment type AURATON PULSE L2 is in compliance with
Direcve 2014/53/EU and 2011/65/EU. The
full text of the EU declaraon of conformity
is available at the following internet address:
hps://manuals.auraton.pl
Specicaon
Environmentally friendly disposal
EU Declaraon of Conformity
Range and posion in your home
Control while you’re away
Expanding your system
Smartphone
AURATON SMART device
Router
Let’s go!
All you need is a standard home WiFi router
with a broadband connecon, a WiFi enabled
device such as smartphone, tablet or PC and
AURATON SMART devices to control.
To funcon AURATON PULSE requires
a permanent Internet connecon.
Take the Ethernet connector cable
(supplied) and connect it to any spare
available LAN port on your wireless router.
Connect the other end of the cable to the
AURATON PULSE single port.
Plug in the power supply and push the
jack plug into the Micro USB connector on
the back of the AURATON PULSE. Turn on
the power supply. The green LED on the
AURATON PULSE will illuminate to indicate
that the Pulse has power and is ready to
be set up from the AURATON SMART App.
The LED indicators are used to indicate the
status of the Pulse and to indicate if there is
a problem. If there is a problem reported,
it will usually refer to an insecure cable
connecon or a server connecon problem.
If it has been set up correctly, the App will
display details of any specic problem.
A single AURATON PULSE covers a typical large house
and should outperform standard WiFi routers. To ensure
the best performance, try not to posion the gateway
next to radiators, water tanks or very thick walls. Sing
AURATON PULSE as high up as possible within your
home (e.g. on the rst oor) will always provide the best
coverage.
You can control AURATON devices whilst away from
home using your app. You can also use mers and events
to schedule devices to work automacally at mes that
you set in the app.
AURATON is very exible, and you can add new AURATON
devices to your system at any me. You can also add new
friends and family members to your network by adding
them using the app.
Let’s get started
Getting started
Attach the
ethernet cable
Attach the
power supply
1
2
What do I need?
Hints and tips 3
1
2
Steady green: Status normal
Flashing green: Transming
Flashing green / amber: Linking mode
Steady red: Cannot contact server
Flashing red: Cable / router problem
LED Indicator Lights
Download and
start Auraton
Smart app
3
Need some help?
Find support and troubleshoong
online or give us a call and we’ll be
happy to help you get started.
Note: The following procedure permanently
deletes all data, added devices and user
accounts.
To restore factory sengs of the AURATON
PULSE gateway, please, do the following:
1. Disconnect the AURATON PULSE from the
power supply.
2. Press and hold the buon on the housing
and connect the AURATON PULSE to the
power source.
3. Wait few seconds unl the LED lights up
orange and release the buon, then press
it again.
4. Wait unl LED change its colour to green.
Restoring the factory sengs
www.auratonsmart.com
[e-mail]
Once your AURATON PULSE is set up,
you will be able to register mulple
smartphones or tablets to control any
number of AURATON devices in your
home.
Pulse
Quick Start Guide
ver 20200122
The extended instrucon can be found at:
hps://manuals.auraton.pl
Owner’s manual

RF frequency: 868,300 MHz 11 dBm ERP
868,150 MHz 11 dBm ERP
868,450 MHz 11 dBm ERP
869,800 MHz 11 dBm ERP
433,950 MHz 10 dBm ERP
Input rang: 5V
Energy usage: 3W approx
Warranty: 2 year standard warranty
Radio receiver category: 2 Old electrical appliances must not be disposed of together
with residual waste, but have to be disposed of separately. The
disposal at the communal collecng point via private persons
is for free. The owner of old appliances is responsible to bring
the appliances to these collecng points or to similar collecon
points. With this lile personal eort, you contribute to recycle
valuable raw materials and the treatment of toxic substances.
Hereby, LARS Andrzej Szymański declares that the radio
equipment type AURATON PULSE L2 is in compliance with
Direcve 2014/53/EU and 2011/65/EU. The
full text of the EU declaraon of conformity
is available at the following internet address:
hps://manuals.auraton.pl
Specicaon
Environmentally friendly disposal
EU Declaraon of Conformity
Range and posion in your home
Control while you’re away
Expanding your system
Smartphone
AURATON SMART device
Router
Let’s go!
All you need is a standard home WiFi router
with a broadband connecon, a WiFi enabled
device such as smartphone, tablet or PC and
AURATON SMART devices to control.
To funcon AURATON PULSE requires
a permanent Internet connecon.
Take the Ethernet connector cable
(supplied) and connect it to any spare
available LAN port on your wireless router.
Connect the other end of the cable to the
AURATON PULSE single port.
Plug in the power supply and push the
jack plug into the Micro USB connector on
the back of the AURATON PULSE. Turn on
the power supply. The green LED on the
AURATON PULSE will illuminate to indicate
that the Pulse has power and is ready to
be set up from the AURATON SMART App.
The LED indicators are used to indicate the
status of the Pulse and to indicate if there is
a problem. If there is a problem reported,
it will usually refer to an insecure cable
connecon or a server connecon problem.
If it has been set up correctly, the App will
display details of any specic problem.
A single AURATON PULSE covers a typical large house
and should outperform standard WiFi routers. To ensure
the best performance, try not to posion the gateway
next to radiators, water tanks or very thick walls. Sing
AURATON PULSE as high up as possible within your
home (e.g. on the rst oor) will always provide the best
coverage.
You can control AURATON devices whilst away from
home using your app. You can also use mers and events
to schedule devices to work automacally at mes that
you set in the app.
AURATON is very exible, and you can add new AURATON
devices to your system at any me. You can also add new
friends and family members to your network by adding
them using the app.
Let’s get started
Getting started
Attach the
ethernet cable
Attach the
power supply
1
2
What do I need?
Hints and tips 3
1
2
Steady green: Status normal
Flashing green: Transming
Flashing green / amber: Linking mode
Steady red: Cannot contact server
Flashing red: Cable / router problem
LED Indicator Lights
Download and
start Auraton
Smart app
3
Need some help?
Find support and troubleshoong
online or give us a call and we’ll be
happy to help you get started.
Note: The following procedure permanently
deletes all data, added devices and user
accounts.
To restore factory sengs of the AURATON
PULSE gateway, please, do the following:
1. Disconnect the AURATON PULSE from the
power supply.
2. Press and hold the buon on the housing
and connect the AURATON PULSE to the
power source.
3. Wait few seconds unl the LED lights up
orange and release the buon, then press
it again.
4. Wait unl LED change its colour to green.
Restoring the factory sengs
www.auratonsmart.com
[e-mail]
Once your AURATON PULSE is set up,
you will be able to register mulple
smartphones or tablets to control any
number of AURATON devices in your
home.
Pulse
Quick Start Guide
ver 20200122
The extended instrucon can be found at:
hps://manuals.auraton.pl
Owner’s manual

RF frequency: 868,300 MHz 11 dBm ERP
868,150 MHz 11 dBm ERP
868,450 MHz 11 dBm ERP
869,800 MHz 11 dBm ERP
433,950 MHz 10 dBm ERP
Input rang: 5V
Energy usage: 3W approx
Warranty: 2 year standard warranty
Radio receiver category: 2 Old electrical appliances must not be disposed of together
with residual waste, but have to be disposed of separately. The
disposal at the communal collecng point via private persons
is for free. The owner of old appliances is responsible to bring
the appliances to these collecng points or to similar collecon
points. With this lile personal eort, you contribute to recycle
valuable raw materials and the treatment of toxic substances.
Hereby, LARS Andrzej Szymański declares that the radio
equipment type AURATON PULSE L2 is in compliance with
Direcve 2014/53/EU and 2011/65/EU. The
full text of the EU declaraon of conformity
is available at the following internet address:
hps://manuals.auraton.pl
Specicaon
Environmentally friendly disposal
EU Declaraon of Conformity
Range and posion in your home
Control while you’re away
Expanding your system
Smartphone
AURATON SMART device
Router
Let’s go!
All you need is a standard home WiFi router
with a broadband connecon, a WiFi enabled
device such as smartphone, tablet or PC and
AURATON SMART devices to control.
To funcon AURATON PULSE requires
a permanent Internet connecon.
Take the Ethernet connector cable
(supplied) and connect it to any spare
available LAN port on your wireless router.
Connect the other end of the cable to the
AURATON PULSE single port.
Plug in the power supply and push the
jack plug into the Micro USB connector on
the back of the AURATON PULSE. Turn on
the power supply. The green LED on the
AURATON PULSE will illuminate to indicate
that the Pulse has power and is ready to
be set up from the AURATON SMART App.
The LED indicators are used to indicate the
status of the Pulse and to indicate if there is
a problem. If there is a problem reported,
it will usually refer to an insecure cable
connecon or a server connecon problem.
If it has been set up correctly, the App will
display details of any specic problem.
A single AURATON PULSE covers a typical large house
and should outperform standard WiFi routers. To ensure
the best performance, try not to posion the gateway
next to radiators, water tanks or very thick walls. Sing
AURATON PULSE as high up as possible within your
home (e.g. on the rst oor) will always provide the best
coverage.
You can control AURATON devices whilst away from
home using your app. You can also use mers and events
to schedule devices to work automacally at mes that
you set in the app.
AURATON is very exible, and you can add new AURATON
devices to your system at any me. You can also add new
friends and family members to your network by adding
them using the app.
Let’s get started
Getting started
Attach the
ethernet cable
Attach the
power supply
1
2
What do I need?
Hints and tips 3
1
2
Steady green: Status normal
Flashing green: Transming
Flashing green / amber: Linking mode
Steady red: Cannot contact server
Flashing red: Cable / router problem
LED Indicator Lights
Download and
start Auraton
Smart app
3
Need some help?
Find support and troubleshoong
online or give us a call and we’ll be
happy to help you get started.
Note: The following procedure permanently
deletes all data, added devices and user
accounts.
To restore factory sengs of the AURATON
PULSE gateway, please, do the following:
1. Disconnect the AURATON PULSE from the
power supply.
2. Press and hold the buon on the housing
and connect the AURATON PULSE to the
power source.
3. Wait few seconds unl the LED lights up
orange and release the buon, then press
it again.
4. Wait unl LED change its colour to green.
Restoring the factory sengs
www.auratonsmart.com
[e-mail]
Once your AURATON PULSE is set up,
you will be able to register mulple
smartphones or tablets to control any
number of AURATON devices in your
home.
Pulse
Quick Start Guide
ver 20200122
The extended instrucon can be found at:
hps://manuals.auraton.pl
Owner’s manual

RF frequency: 868,300 MHz 11 dBm ERP
868,150 MHz 11 dBm ERP
868,450 MHz 11 dBm ERP
869,800 MHz 11 dBm ERP
433,950 MHz 10 dBm ERP
Input rang: 5V
Energy usage: 3W approx
Warranty: 2 year standard warranty
Radio receiver category: 2 Old electrical appliances must not be disposed of together
with residual waste, but have to be disposed of separately. The
disposal at the communal collecng point via private persons
is for free. The owner of old appliances is responsible to bring
the appliances to these collecng points or to similar collecon
points. With this lile personal eort, you contribute to recycle
valuable raw materials and the treatment of toxic substances.
Hereby, LARS Andrzej Szymański declares that the radio
equipment type AURATON PULSE L2 is in compliance with
Direcve 2014/53/EU and 2011/65/EU. The
full text of the EU declaraon of conformity
is available at the following internet address:
hps://manuals.auraton.pl
Specicaon
Environmentally friendly disposal
EU Declaraon of Conformity
Range and posion in your home
Control while you’re away
Expanding your system
Smartphone
AURATON SMART device
Router
Let’s go!
All you need is a standard home WiFi router
with a broadband connecon, a WiFi enabled
device such as smartphone, tablet or PC and
AURATON SMART devices to control.
To funcon AURATON PULSE requires
a permanent Internet connecon.
Take the Ethernet connector cable
(supplied) and connect it to any spare
available LAN port on your wireless router.
Connect the other end of the cable to the
AURATON PULSE single port.
Plug in the power supply and push the
jack plug into the Micro USB connector on
the back of the AURATON PULSE. Turn on
the power supply. The green LED on the
AURATON PULSE will illuminate to indicate
that the Pulse has power and is ready to
be set up from the AURATON SMART App.
The LED indicators are used to indicate the
status of the Pulse and to indicate if there is
a problem. If there is a problem reported,
it will usually refer to an insecure cable
connecon or a server connecon problem.
If it has been set up correctly, the App will
display details of any specic problem.
A single AURATON PULSE covers a typical large house
and should outperform standard WiFi routers. To ensure
the best performance, try not to posion the gateway
next to radiators, water tanks or very thick walls. Sing
AURATON PULSE as high up as possible within your
home (e.g. on the rst oor) will always provide the best
coverage.
You can control AURATON devices whilst away from
home using your app. You can also use mers and events
to schedule devices to work automacally at mes that
you set in the app.
AURATON is very exible, and you can add new AURATON
devices to your system at any me. You can also add new
friends and family members to your network by adding
them using the app.
Let’s get started
Getting started
Attach the
ethernet cable
Attach the
power supply
1
2
What do I need?
Hints and tips 3
1
2
Steady green: Status normal
Flashing green: Transming
Flashing green / amber: Linking mode
Steady red: Cannot contact server
Flashing red: Cable / router problem
LED Indicator Lights
Download and
start Auraton
Smart app
3
Need some help?
Find support and troubleshoong
online or give us a call and we’ll be
happy to help you get started.
Note: The following procedure permanently
deletes all data, added devices and user
accounts.
To restore factory sengs of the AURATON
PULSE gateway, please, do the following:
1. Disconnect the AURATON PULSE from the
power supply.
2. Press and hold the buon on the housing
and connect the AURATON PULSE to the
power source.
3. Wait few seconds unl the LED lights up
orange and release the buon, then press
it again.
4. Wait unl LED change its colour to green.
Restoring the factory sengs
www.auratonsmart.com
[e-mail]
Once your AURATON PULSE is set up,
you will be able to register mulple
smartphones or tablets to control any
number of AURATON devices in your
home.
Pulse
Quick Start Guide
ver 20200122
The extended instrucon can be found at:
hps://manuals.auraton.pl
Owner’s manual

RF frequency: 868,300 MHz 11 dBm ERP
868,150 MHz 11 dBm ERP
868,450 MHz 11 dBm ERP
869,800 MHz 11 dBm ERP
433,950 MHz 10 dBm ERP
Input rang: 5V
Energy usage: 3W approx
Warranty: 2 year standard warranty
Radio receiver category: 2 Old electrical appliances must not be disposed of together
with residual waste, but have to be disposed of separately. The
disposal at the communal collecng point via private persons
is for free. The owner of old appliances is responsible to bring
the appliances to these collecng points or to similar collecon
points. With this lile personal eort, you contribute to recycle
valuable raw materials and the treatment of toxic substances.
Hereby, LARS Andrzej Szymański declares that the radio
equipment type AURATON PULSE L2 is in compliance with
Direcve 2014/53/EU and 2011/65/EU. The
full text of the EU declaraon of conformity
is available at the following internet address:
hps://manuals.auraton.pl
Specicaon
Environmentally friendly disposal
EU Declaraon of Conformity
Range and posion in your home
Control while you’re away
Expanding your system
Smartphone
AURATON SMART device
Router
Let’s go!
All you need is a standard home WiFi router
with a broadband connecon, a WiFi enabled
device such as smartphone, tablet or PC and
AURATON SMART devices to control.
To funcon AURATON PULSE requires
a permanent Internet connecon.
Take the Ethernet connector cable
(supplied) and connect it to any spare
available LAN port on your wireless router.
Connect the other end of the cable to the
AURATON PULSE single port.
Plug in the power supply and push the
jack plug into the Micro USB connector on
the back of the AURATON PULSE. Turn on
the power supply. The green LED on the
AURATON PULSE will illuminate to indicate
that the Pulse has power and is ready to
be set up from the AURATON SMART App.
The LED indicators are used to indicate the
status of the Pulse and to indicate if there is
a problem. If there is a problem reported,
it will usually refer to an insecure cable
connecon or a server connecon problem.
If it has been set up correctly, the App will
display details of any specic problem.
A single AURATON PULSE covers a typical large house
and should outperform standard WiFi routers. To ensure
the best performance, try not to posion the gateway
next to radiators, water tanks or very thick walls. Sing
AURATON PULSE as high up as possible within your
home (e.g. on the rst oor) will always provide the best
coverage.
You can control AURATON devices whilst away from
home using your app. You can also use mers and events
to schedule devices to work automacally at mes that
you set in the app.
AURATON is very exible, and you can add new AURATON
devices to your system at any me. You can also add new
friends and family members to your network by adding
them using the app.
Let’s get started
Getting started
Attach the
ethernet cable
Attach the
power supply
1
2
What do I need?
Hints and tips 3
1
2
Steady green: Status normal
Flashing green: Transming
Flashing green / amber: Linking mode
Steady red: Cannot contact server
Flashing red: Cable / router problem
LED Indicator Lights
Download and
start Auraton
Smart app
3
Need some help?
Find support and troubleshoong
online or give us a call and we’ll be
happy to help you get started.
Note: The following procedure permanently
deletes all data, added devices and user
accounts.
To restore factory sengs of the AURATON
PULSE gateway, please, do the following:
1. Disconnect the AURATON PULSE from the
power supply.
2. Press and hold the buon on the housing
and connect the AURATON PULSE to the
power source.
3. Wait few seconds unl the LED lights up
orange and release the buon, then press
it again.
4. Wait unl LED change its colour to green.
Restoring the factory sengs
www.auratonsmart.com
[e-mail]
Once your AURATON PULSE is set up,
you will be able to register mulple
smartphones or tablets to control any
number of AURATON devices in your
home.
Pulse
Quick Start Guide
ver 20200122
The extended instrucon can be found at:
hps://manuals.auraton.pl
Owner’s manual

RF frequency: 868,300 MHz 11 dBm ERP
868,150 MHz 11 dBm ERP
868,450 MHz 11 dBm ERP
869,800 MHz 11 dBm ERP
433,950 MHz 10 dBm ERP
Input rang: 5V
Energy usage: 3W approx
Warranty: 2 year standard warranty
Radio receiver category: 2 Old electrical appliances must not be disposed of together
with residual waste, but have to be disposed of separately. The
disposal at the communal collecng point via private persons
is for free. The owner of old appliances is responsible to bring
the appliances to these collecng points or to similar collecon
points. With this lile personal eort, you contribute to recycle
valuable raw materials and the treatment of toxic substances.
Hereby, LARS Andrzej Szymański declares that the radio
equipment type AURATON PULSE L2 is in compliance with
Direcve 2014/53/EU and 2011/65/EU. The
full text of the EU declaraon of conformity
is available at the following internet address:
hps://manuals.auraton.pl
Specicaon
Environmentally friendly disposal
EU Declaraon of Conformity
Range and posion in your home
Control while you’re away
Expanding your system
Smartphone
AURATON SMART device
Router
Let’s go!
All you need is a standard home WiFi router
with a broadband connecon, a WiFi enabled
device such as smartphone, tablet or PC and
AURATON SMART devices to control.
To funcon AURATON PULSE requires
a permanent Internet connecon.
Take the Ethernet connector cable
(supplied) and connect it to any spare
available LAN port on your wireless router.
Connect the other end of the cable to the
AURATON PULSE single port.
Plug in the power supply and push the
jack plug into the Micro USB connector on
the back of the AURATON PULSE. Turn on
the power supply. The green LED on the
AURATON PULSE will illuminate to indicate
that the Pulse has power and is ready to
be set up from the AURATON SMART App.
The LED indicators are used to indicate the
status of the Pulse and to indicate if there is
a problem. If there is a problem reported,
it will usually refer to an insecure cable
connecon or a server connecon problem.
If it has been set up correctly, the App will
display details of any specic problem.
A single AURATON PULSE covers a typical large house
and should outperform standard WiFi routers. To ensure
the best performance, try not to posion the gateway
next to radiators, water tanks or very thick walls. Sing
AURATON PULSE as high up as possible within your
home (e.g. on the rst oor) will always provide the best
coverage.
You can control AURATON devices whilst away from
home using your app. You can also use mers and events
to schedule devices to work automacally at mes that
you set in the app.
AURATON is very exible, and you can add new AURATON
devices to your system at any me. You can also add new
friends and family members to your network by adding
them using the app.
Let’s get started
Getting started
Attach the
ethernet cable
Attach the
power supply
1
2
What do I need?
Hints and tips 3
1
2
Steady green: Status normal
Flashing green: Transming
Flashing green / amber: Linking mode
Steady red: Cannot contact server
Flashing red: Cable / router problem
LED Indicator Lights
Download and
start Auraton
Smart app
3
Need some help?
Find support and troubleshoong
online or give us a call and we’ll be
happy to help you get started.
Note: The following procedure permanently
deletes all data, added devices and user
accounts.
To restore factory sengs of the AURATON
PULSE gateway, please, do the following:
1. Disconnect the AURATON PULSE from the
power supply.
2. Press and hold the buon on the housing
and connect the AURATON PULSE to the
power source.
3. Wait few seconds unl the LED lights up
orange and release the buon, then press
it again.
4. Wait unl LED change its colour to green.
Restoring the factory sengs
www.auratonsmart.com
[e-mail]
Once your AURATON PULSE is set up,
you will be able to register mulple
smartphones or tablets to control any
number of AURATON devices in your
home.
Pulse
Quick Start Guide
ver 20200122
The extended instrucon can be found at:
hps://manuals.auraton.pl
Owner’s manual