Austro Flamm Polly 2.0 User manual

Operating manual
Polly 2.0
www.austroflamm.com

Operating manual
22/06/2023
Version: 1.0
LEGAL NOTICES
Owner and publisher
AUSTROFLAMM GMBH
Austroflamm-Platz 1
A- 4631 Krenglbach
Tel: [phone] / 46 443
www.austroflamm.com
[email protected]
Edited by: Olivera Stojanovic
Illustrations: Konstruktion
Text: Technical department (Austroflamm)
Copyright
All Rights reserved. The contents of these instructions may be reproduced or distributed only with the
consent of the publisher! Printing, spelling and typographical errors reserved.

Operating manual Polly 2.0 Contents
3
Contents
1 General information ............................................................................................................................................ 6
1.1 Copyright.............................................................................................................................................. 6
2 Purpose of the manual........................................................................................................................................ 7
2.1 Storing the manual .............................................................................................................................. 7
2.2 Structure of the manual....................................................................................................................... 7
2.3 Representations used.......................................................................................................................... 7
2.4 Version control..................................................................................................................................... 7
2.5 Abbreviations....................................................................................................................................... 8
3 Safety..................................................................................................................................................................... 9
3.1 Importance of the safety instructions................................................................................................ 9
3.2 General safety instructions ................................................................................................................. 9
3.3 Safety distances ................................................................................................................................... 11
4 Product overview................................................................................................................................................. 12
4.1 Intended use ........................................................................................................................................ 12
4.2 Identification of the product............................................................................................................... 12
4.2.1 Dimensions........................................................................................................................................... 12
4.2.2 Positioning of the nameplate ............................................................................................................. 13
4.3 Energy label.......................................................................................................................................... 13
5 Technical data ...................................................................................................................................................... 14
5.1 Technical data under Directive (EU) 2015/1185 and del. as per Regulation (EN) 2015/1186 . 14
5.2 General specifications......................................................................................................................... 17
6 Transport, handling and storage....................................................................................................................... 18
6.1 Transport............................................................................................................................................... 18
6.2 Transport brackets............................................................................................................................... 18
6.3 Storage.................................................................................................................................................. 18
7 Requirements at the installation location ........................................................................................................ 19
7.1 Requirements to be met by the installation room........................................................................... 19
7.2 Chimney requirements ....................................................................................................................... 19
7.3 Combustion air / Outside air supply ................................................................................................. 19
8 Fuel material/-quantity ....................................................................................................................................... 20
8.1 Fuel material......................................................................................................................................... 20
8.2 Fuel quantity......................................................................................................................................... 20
9 Installation ............................................................................................................................................................ 21
9.1 Risks and hazards................................................................................................................................. 21
9.2 Procedure ............................................................................................................................................. 21
9.2.1 Installing the HMS (with ceramic-/soapstone casing) ..................................................................... 21
9.2.2 Installing the HMS (with steel casing)................................................................................................ 23
9.2.3 Mounting the cladding ....................................................................................................................... 25
9.2.4 Mounting the Keramott....................................................................................................................... 26
10 Operation.............................................................................................................................................................. 27
10.1 Requirements for operation ............................................................................................................... 27

Contents Operating manual Polly 2.0
4
10.2 Operating modes ................................................................................................................................ 28
10.2.1 Pellet operation.................................................................................................................................... 28
11 Commissioning .................................................................................................................................................... 30
11.1 First start-up.......................................................................................................................................... 30
12 Operation.............................................................................................................................................................. 31
12.1 Operation using APP and Smartphone ............................................................................................ 31
12.2 Operation using IR remote control ................................................................................................... 32
12.3 Operation using touch display........................................................................................................... 33
12.3.1 Display - room temperature display, various functions .................................................................. 33
12.3.2 Display - heat output display, other function menus ...................................................................... 33
12.3.3 Display - status display........................................................................................................................ 34
12.4 Functions .............................................................................................................................................. 34
12.4.1 Function - filling level indicator.......................................................................................................... 34
12.4.2 Function - setting timers and heating times..................................................................................... 34
12.5 Setting / editing new heating times .................................................................................................. 35
13 Adjustments.......................................................................................................................................................... 36
13.1 Display - settings.................................................................................................................................. 36
13.2 Menu item - time/date ........................................................................................................................ 37
13.3 Menu item - fuel ................................................................................................................................... 37
13.4 Menu item: Bluetooth devices ........................................................................................................... 37
13.5 Menu item - eco-mode ....................................................................................................................... 38
13.6 Menu item - external thermostat ....................................................................................................... 38
13.7 Menu item - anti-frost .......................................................................................................................... 38
13.8 Menu item - display options............................................................................................................... 39
13.9 Menu item - temperature unit ............................................................................................................ 39
13.10 Menu item - volume............................................................................................................................. 40
13.11 Menu item - manual pellet feed......................................................................................................... 40
13.12 Menu item - service due ..................................................................................................................... 40
13.13 Menu item - service menu .................................................................................................................. 40
13.14 Menu item - display lock..................................................................................................................... 40
13.15 Menu item - Language........................................................................................................................ 41
13.16 Menu item - Info................................................................................................................................... 41
13.17 Menu item - Heating statistics ............................................................................................................ 41
13.18 Menu item - tips ................................................................................................................................... 41
13.19 Adjusting the firebox door ................................................................................................................. 42
13.20 Adjusting the closing force of the fire door ..................................................................................... 44
14 Maintenance......................................................................................................................................................... 46
14.1 Intervals................................................................................................................................................. 46
14.2 Stove models with automatic riddling grate.................................................................................... 46
14.3 Cleaning the exhaust gas pipes......................................................................................................... 47
14.4 Changing the storage battery............................................................................................................ 49
15 Alarms and error messages................................................................................................................................ 50
15.1 List of alarms and errors...................................................................................................................... 50
15.2 Resetting warnings and errors ........................................................................................................... 51

Operating manual Polly 2.0 Contents
5
15.3 Safety temperature limiter.................................................................................................................. 51
16 Electrical connection diagram ........................................................................................................................... 52
16.1 Electrical connection ........................................................................................................................... 52
16.2 Model with permanently running screw motor ............................................................................... 52
17 Dismantling .......................................................................................................................................................... 54
18 Spare parts............................................................................................................................................................ 55
19 Disposal................................................................................................................................................................. 60
20 Warranty and guarantee .................................................................................................................................... 62
21 Start up log ........................................................................................................................................................... 63
22 Service Report...................................................................................................................................................... 64

1 | General information EN Operating manual Polly 2.0
6
1 General information
You have decided in favour of an Austroflamm pellet stove.
Congratulations on your decision and thank you for your trust.
Correct operation and care are essential for trouble-free operation and long service life.
The information in this manual is of a general nature. National and European standards, local and
building regulations, together with fire regulations must also be complied with.
Read these instruction through carefully before installation and operation. No liability or warranty
claims apply for damage incurred by failure to follow this manual. Please observe the instructions in
the individual sections.
This manual is a component part of the pellet stove.
In the following list we give you an overview of which sections are important for whom:
Dealer End customer
Complete operating manual General information
Purpose of the manual
Safety
Product overview
Technical data
Requirements at the installation location
Fuel material/-quantity
Operation
Operation
Settings
Commissioning
Maintenance
Alarms and error messages
Spare parts
Disposal
Warranty and guarantee
Data processing
Start up log
Service Report
1.1 Copyright
All Rights reserved. The contents of these instructions may be reproduced or distributed only with the
consent of the publisher! Printing, spelling and typographical errors reserved.

Operating manual Polly 2.0 EN 2 | Purpose of the manual
7
2 Purpose of the manual
This manual is a component part of the pellet stove and is intended to contribute to the pellet stove
being safely installed and maintained.
TIP
Please read this manual before using the stove for the first time.
2.1 Storing the manual
Store this manual in case you need it. A current version of the manual can be found online at our
homepage www.austroflamm.com.
2.2 Structure of the manual
The table of contents can be found on page 3.
Illustrations in this manual may differ from the delivered product.
2.3 Representations used
The following representations are used in this manual:
Steps with mandatory adherence to the sequence
üPrerequisite
1) Step 1
2) Step 2
3) …..
ðIntermediate result / additional information
ðResult
Steps and bullet points without mandatory sequence
• ….
• ….
– ….
– ….
Cross-references
See Technical Data
Useful tips
TIP
Fuel
Use only the recommended fuel!
2.4 Version control
We update our manuals on a continual basis. The current version can be found at our homepage
www.austroflamm.com.

2 | Purpose of the manual EN Operating manual Polly 2.0
8
2.5 Abbreviations
Abbreviation Meaning
HMS Heat Memory System
BA Basic appliance
CC Ceramic casing
SC Steel casing
SSC Soapstone casing

Operating manual Polly 2.0 EN 3 | Safety
9
3 Safety
In this manual we give you numerous safety instructions for the safe operation of your pellet stove.
These instructions are characterized differently as follows, depending on their importance:
3.1 Importance of the safety instructions
NOTICE
Particular behaviour and/or activities that are required for safe working. Failure to follow this can result
in material damage.
CAUTION
Possible dangerous situation (light or minor injuries and material damage).
WARNING
Possibly imminent danger to life and health of persons (severe injuries or death).
DANGER
Immediately imminent danger to life and health of persons (severe injuries or death).
3.2 General safety instructions
• The information in this manual represents generally applicable standards and rules. National and
European standards, local and building regulations, together with fire regulations must also be
complied with.
• Please carefully store this manual and ensure that it is always available.
• Servicing falls due after a number of hours specific to the appliance has been reached, but at least
1x annually in order to GUARANTEE THE WARRANTY!
• Compliance with the instructions contained here will guarantee the safety of people and the appli-
ance, economic operation and a long service life. The pellet stove has been designed based on
standards EN 14785 and EN 13240.
• Original parts must not be modified or exchanged for parts from other manufacturers. Such action
will void the warranty claim.
• When working or intervening on the pellet stove, the power supply must be switched off.
• Diagrams and drawings supplied with the stove are used only as illustrative examples; the manu-
facturer pursues a policy of constantly developing and updating the product and may make modi-
fications without prior notification.
• All dimensions in this manual are given in mm.
• Your pellet stove is not suitable for use as a ladder or a stand.
• Please note that the surfaces of the pellet stove heat up considerably during operation. We recom-
mend that you use the protective glove supplied to operate the pellet stove.
• Please alert children to these dangers, and keep them away from the pellet stove when it is operat-
ing.

3 | Safety EN Operating manual Polly 2.0
10
• No rubbish (of any kind) or residual materials may be burnt in the pellet stove. Only the recommen-
ded fuels may be burnt.
• Placing non-heat-resistant objects on the stove or in its vicinity is forbidden.
• Do not place any items of laundry on the pellet stove to dry. Even laundry racks or the like must be
placed at a sufficient distance from the hybrid stove - fire risk!
• While your pellet stove is in operation, it is forbidden to process highly flammable or explosive
substances in the same room or in adjoining rooms.
• It must be ensured that there is a sufficient supply of combustion air and safe removal of exhaust
gases. Therefore always check whether the chimney is blocked, especially after a long break in op-
eration.
• In the transition period, i.e. during high external temperatures, a sudden temperature rise can dis-
rupt the chimney draft so that the fuel gases are not completely drawn off. Should this be the case,
switch off the pellet stove.
• The convection air grille must never be closed, not even partially.
• Venting systems that are being operated together with the fireplace in the same room or group of
rooms may cause problems.
• The pellet stove must be regularly cleaned and maintained: see Maintenance section.
• Repairs to your pellet stove must only be carried out by technical personnel who have been trained
by the manufacturer.
• Exchange spare parts depending on requirement and condition. Regularly check the electrical and
electronic components for damage or wear.
• Safety features must not be bypassed.
• If fuel used is incorrect or too moist, then due to deposits in the chimney this may lead to a chim-
ney fire. Immediately close all ventilator openings on the chimney and inform the fire service. After
the chimney has burned out, have it checked by an expert for cracks and leaks.
• Under certain conditions, pellet appliances are suitable also for multiple occupancy of chimneys.
Your master chimney sweep will inform you of these conditions and carry out the appropriate ac-
ceptance.
• Please note that the room in which the stove is installed must have at least one door / one window
leading to the outside, or be directly connected to such a room. Other heating appliances and ex-
tractor bonnets must not be operated together with these heating appliances as part of the room
air system.
• The firebox door must be kept closed when the fire is operating.
• The installation surface for the pellet stove must have an appropriate load-bearing capacity. If an
existing design does not fulfil this condition, suitable measures (e.g. a plate for distribution of the
load) must be taken to meet it.
• This manual must be carefully read through before the installation, use or any intervention on the
pellet stove.

Operating manual Polly 2.0 EN 3 | Safety
11
3.3 Safety distances
bb
a
c
Fig.1: Safety distances (view from above) up
When setting up in the room the following safety distances
to combustible materials (minimum distances - see also
nameplate) must be adhered to.
• a) 800mm (at the front in the radiation area of the door)
• b) 100mm (at the sides)
• c) 100mm (rear)
Caution: The floor in the radiation area of the glass firebox
door must be non-combustible.
Note that the room in which the stove is installed must have
at least one door / one window leading to the outside, or
be directly connected to such a room. Other heating appli-
ances and extractor bonnets must not be operated together
with this heating appliance as part of the room air system.
This pellet stove is positioned on the floor and aligned hori-
zontally, observing the safety distances. The height of the
adjustable feet can be altered.

4 | Product overview EN Operating manual Polly 2.0
12
4 Product overview
4.1 Intended use
The Austroflamm pellet stove described in this manual is manufactured and tested as a type A1 self-
closing appliance.
NOTICE
Operation is only permitted with the door shut, ash pan locked and hopper lid closed.
4.2 Identification of the product
In the following illustrations we will inform you of dimensions and the nameplate positioning.
4.2.1 Dimensions
526
144
183
1101
492
542
133
325
f
g
b
h
80
80
Fig.2: Polly 2.0

Operating manual Polly 2.0 EN 4 | Product overview
13
4.2.2 Positioning of the nameplate
Here we show where you can find the nameplate. You received a copy of the nameplate with the pellet
stove. You can find a copy of the nameplate of your pellet stove on the back of the manual that you re-
ceived with the stove.
Fig.3: Nameplate
The nameplate of your pellet stove is located on the inside
of the hopper lid.
4.3 Energy label
I I I
A+
A
B
C
D
E
F
G
A+
2015/1186
7,5
kW
ENERGIA · ЕНЕРГИЯ · ΕΝΕΡΓΕΙΑ · ENERGIJA · ENERGY · ENERGIE · ENERGI
A++
A+
A+++
A++
A+
A-80%
A-60%
A-40%
A-20%
Austrof amm Polly 2.0
Fig.4: Polly 2.0 energy label

5 | Technical data EN Operating manual Polly 2.0
14
5 Technical data
5.1 Technical data under Directive (EU) 2015/1185 and del. as per Regulation
(EN) 2015/1186
Contact details for the manufacturer or their authorised representative
Manufacturer: Austroflamm GmbH
Contact: -
Address: Austroflamm-Platz 1
4631 Krenglbach
Austria
Appliance details
Model identification(s): Polly 2.0
Equivalent models: -
Test reports: PL-15057-P by 1746 TU
Applied harmonized standards: EN 14785:2006
Other standards/technical specifications. Specifications: -
Indirect heating function: no
Direct heat output: 7.5 kW
Indirect heat output1: -
Properties for operation with the preferred fuel
Space heating annual use efficiency ηs: 87.9%
Energy efficiency index (EEI): 128

Operating manual Polly 2.0 EN 5 | Technical data
15
Particular precautions for assembly, installation or maintenance
Described in the individual sections of the operating manual.
Fuel Preferred
fuel
(only one)2:
Other suit-
able fuel(s)3:
ηs
[x%]:
Space heating emis-
sions at nominal heat ef-
ficiency (*)
Space heating emis-
sions at minimum
heat efficiency4 (*) (**)
PM OGC CO NOx PM OGC CO NOx
[x] mg/Nm³ (13% O2)5[x] mg/Nm³ (13%
O2)6
Log, moisture content ≤
25 %
no no - - - - - - - - -
Compregnated laminated
wood,
Moisture content < 12 %
yes no 87.9 15 3 47 138 18 3 173 138
Other woody biomass no no - - - - - - - - -
Non-woody biomass no no - - - - - - - - -
Anthracite and dry steam
coal
no no - - - - - - - - -
Coking coal no no - - - - - - - - -
Semi-coke no no - - - - - - - - -
Bituminous coal no no - - - - - - - - -
Lignite briquettes no no - - - - - - - - -
Peat briquettes no no - - - - - - - - -
Briquettes made from a
mixture of fossil fuels
no no - - - - - - - - -
Other fossil fuels no no - - - - - - - - -
Briquettes made from a
mixture of biomass and
fossil fuels
no no - - - - - - - - -
Other mixture of biomass
and solid fuels
no no - - - - - - - - -
(*) PM = dust, OGC = organic gaseous connections, CO = carbon monoxide, NOx = nitrogen oxide
(**) Only required when using correction factors F(2) or F(3).

5 | Technical data EN Operating manual Polly 2.0
16
Properties for exclusive operation with the preferred fuels7
Specification Symbol Value Unit Specification Symbol Value Unit
Heat output Thermal efficiency (fuel efficiency) (based on the NCV)
Nominal heat effi-
ciency
Pnom 7.5 kW Thermal efficiency (fuel ef-
ficiency) at nominal heat
efficiency
ηth,nom 90.7 %
Minimum heat
output (standard
value)
Pmin 2.6 kW thermal efficiency (fuel ef-
ficiency) at minimum heat
output (standard value)
ηth,min 90.7 %
Auxiliary power consumption Type of heat output/room temperature control
At nominal heat
efficiency
elmax 0.020 kW single-level heat output, no room temperature
control
no
At minimum heat
output
elmin 0.020 kW two or more manually adjustable levels, no room
temperature control
no
In standby condi-
tion
elSB 0.004 kW Room temperature control with mechanical ther-
mostat
no
Pilot flame power requirement With electronic room temperature control no
Pilot flame power
requirement
(if present)
Ppilot - kW with electronic room temperature control and day-
time regulation
no
with electronic room temperature control and
weekday regulation
yes
Other regulation options
(Multiple answers possible)
Room temperature control with presence detec-
tion
no
Room temperature control with open window de-
tection
no
with remote control option yes
1 There is no entry for fireplaces without water-carrying components.
2 Values for annual use efficiency and emissions must be given here for the preferred fuel.
3 Values for annual use efficiency and emissions must be given here for all other suitable fuels.
4 Corresponds to partial load heat output as per EN 16510
5 Specification in mg/m³ for heated filter method (in compliance with Annexe III, number 4, letter a,
section i, point 1) or g/kg for measurement in dilution tunnel (in compliance with Annexe III, number 4,
letter a, section i, point 2 and 3.)
6 Specification mg/m³ for heated filter method (in compliance with Annexe III, number 4, letter a, sec-
tion i, point 1) or g/kg for measurement in dilution tunnel (in compliance with Annexe III, number 4, let-
ter a, section i, point 2 and 3.)
7 Specifications are made here for the preferred fuel only.

Operating manual Polly 2.0 EN 5 | Technical data
17
5.2 General specifications
Technical data
Height [mm] 1100
Width [mm] 526
Depth [mm] 492
Weight, basic appliance (GG) [kg] 138
Weight, HMS [kg] 73/14.7
Weight of basic appliance + steel casing (STM) [kg] 158
Weight of basic appliance + ceramic casing (KMG) [kg] 174
Weight of basic appliance + soapstone casing (SPM) [kg] 211
Nominal heat efficiency [kW] 7.8
Partial load heat output [kW] (pellet) 2.4
Space heating capacity, at least (depending on the building insulation) [m³] 98
Maximum room-heating capacity (depending on the building insulation) [m³] 225
Efficiency [%] 90.7
CO [mg/Nm³]by13%O2 47
Flue gas temperature at nominal heat output [°C] 207
Partial output flue gas temperature [°C] 94
Flue gas mass flow [g/s] 4.9
Minimum feed pressure at nominal heat output [Pa] 12
Pellet hopper capacity [kg] 25
Pellet hopper capacity [l] 39
Fuel throughput, minimum [kg/h] 0.6
Fuel throughput, maximum [kg/h] 1.9
Outside air connection in the back center [Ø] 144
Flue pipe outlet, diameter [mm] 80
Power connection [V/Hz] 230/50
Temperature limits 0-40
Relative humidity non-condensing
Fire safety – distance from combustible materials, ceiling [mm] -
Minimum distance from non-flammable materials [mm] 50
Safety distance to combustible materials, front [mm] 800
Safety distance to combustible materials, side [mm] 100
Safety distance to combustible materials, back [mm] 100

6 | Transport, handling and storage EN Operating manual Polly 2.0
18
6 Transport, handling and storage
6.1 Transport
Fig.5: Crate
Immediately checked the goods delivered for complete-
ness and damage in transit.
Before installing the pellet stove, check that all movable
parts are working. Any defects must be reported before in-
stalling the pellet stove.
Transport is with a crate. Use a lifting truck or forklift to
transport the crate including the pellet stove.
Remove the crate and dispose of it appropriately.
6.2 Transport brackets
In order to ensure safe transport of the pellet stoves, they are delivered with transport brackets. Please
make sure to remove the transport brackets before installing the pellet stove. The brackets are located
on the bottom of the pellet stove.
6.3 Storage
The appliance must be stored in a dry room/warehouse. Protect it against dirt, heat and moisture.
The following illustrations are attached to the crate and must be complied with:
• Fragile – always place upright – protect against moisture
and store dry.
• Remove and dispose of packing material in an environ-
mentally friendly manner.
• The crate can be disposed of in the separate collection
for packaging. Local disposal regulations must be ob-
served.

Operating manual Polly 2.0 EN 7 | Requirements at the installation location
19
7 Requirements at the installation location
7.1 Requirements to be met by the installation room
Your pellet stove must not be set up in:
• spaces in which the required combustion air supply is not guaranteed.
• spaces which are generally accessible, in particular emergency exits (staircases in residential build-
ing with no more than 2 apartments are not included in general accessible spaces).
• spaces in which easily flammable or potentially explosive substances or mixtures are processed,
stored or manufactured.
• spaces, apartments or units from which air is extracted with the aid of ventilators, such as ventila-
tion- or hot-air heating installations, extractor hoods or exhaust air tumble dryers. Unless the safe
function of the pellet stove is ensured.
This is ensured if:
– the systems only circulate air within a space.
– the systems have safety features which autonomously and reliably prevent negative pressure in
the installation space.
– simultaneous operation of the fireplace and the air-extracting system is prevented by safety
features.
– the flue gas routing is monitored by a particular piece of safety equipment.
Floor load-bearing capacity
Before installing, verify whether the load-bearing capacity of the substructure can withstand the weight
of your pellet stove.
• The installation surface for the pellet stove must have an appropriate load-bearing capacity. If an
existing design does not fulfil this condition, suitable measures (e.g. a plate for distribution of the
load) must be taken to meet it.
7.2 Chimney requirements
To protect your own safety, national and local regulations exist governing the connection of flue pipes
to the chimney. Your pellet stove is set up at the factory for connecting to 130 mm flue diameter / top.
With minor modifications on site it can also be connected at the rear. When connecting with other pipe
diameters, you should obtain the prior approval of your chimney sweep. Your specialist pellet stove
dealer will be familiar with the guidelines. For your own safety the flue connection should be carried
out by a specialist.
7.3 Combustion air / Outside air supply
This pellet stove requires sufficient combustion air to operate smoothly. With dense building envel-
opes, the room air is insufficient. For this reason, the combustion air required must be supplied from
outside.
Your pellet stove is prepared for this situation (balanced flue operation). The external air supply pipe
must be connected tightly to the pellet stove (e.g. a pipe clamp or airtight adhesive tape). Your dealer
will advise you on the correct connection.

8 | Fuel material/-quantity EN Operating manual Polly 2.0
20
8 Fuel material/-quantity
8.1 Fuel material
Fig.6: Pellet
Fig.7: ENplus A1
Pellets
Poor pellet quality will cause significant residues in the pel-
let stove when burnt. We therefore urge the use of pellets
that have no artificial binding agents. That way only a small
unburnt residue is left.
ENplus-A1 certified pellets meet this requirement.
When storing the pellets it is vital to ensure that they are
stored in a cool dry place free of contamination. Damp and
dirty pellets result in poor combustion and block the screw
conveyor.
NOTICE
The use of inferior-quality pellets or other material will
damage the working of your pellet stove and void the guar-
antee and warranty.
Explosive substances
It is strictly forbidden to burn or introduce highly flammable or explosive substances (such as empty
aerosols and the like) into the firebox or to store them in the immediate vicinity of your pellet stove
due to the risk of explosion!
Fuel
Only burn the recommended fuel.
8.2 Fuel quantity
Maximum fuel quantity
Every pellet stove is designed for a maximum fuel quantity: see Technical Data section. Larger fuel
quantities lead to overheating and damage to the pellet stove!
NOTICE
To avoid damage you must NEVER operate your pellet stove with a greater quantity of fuel than that
specified in these user instructions!