AutoAqua Smart Skimmer Security Installation guide

Smart Security System FAQ AUG. 2018 v.1
Copyright ©2018 AUTOAQUA Technologies Co., Ltd. All rights reserved
Smart Security System FAQ
1. What is the difference between Smart Skimmer Security and Smart
Level Security?
2. Why does the Smart Skimmer Security not turn on the protein
skimmer after plugging in the power cord?
3. Can Smart Skimmer/Temp/Level Security reset itself automatically
after the problem is solved?
4. Why does the Smart Skimmer/Temp/Level Security beep and blink
blue after the problem was solved and unplugged and plugged in?

Smart Security System FAQ AUG. 2018 v.1
Copyright ©2018 AUTOAQUA Technologies Co., Ltd. All rights reserved
1. What is the difference between Smart Skimmer Security and Smart
Level Security?
Smart Skimmer Security is specially designed for protein skimmers. It will power
on the protein skimmer after 5 minutes when it is plugged in to prevent protein
skimmer overflowing after power outage. While Smart Level Security will power
on the device after 10 seconds when it is plugged in and can be used for high or
low level. We recommend you choose the product according to the device you
will use with.
2. Why does the Smart Skimmer Security not turn on the protein
skimmer after plugging in the power cord?
Smart Skimmer Security has auto time delay function for equipment power-on
and sensor detection to prevent false alarms after power outage. It will turn on
the protein skimmer and start detection in 5 minutes after plugged in.
3. Can Smart Skimmer/Temp/Level Security reset itself automatically
after the problem is solved?
No. Skimmer/Temp/Level Security will not reset itself automatically after the
problem is solved because it has to inform users there is or was a problem.
Please unplug and plug Smart Skimmer/Temp/Level Security back in after the
problem is solved.
4. Why does the Smart Skimmer/Temp/Level Security beep and blink
blue after the problem was solved and unplugged and plugged in?
Smart Skimmer/Temp/Level Security will beep for 10 seconds and blink blue for
5 minutes after plugged in, and then it will start detection. It is designed to
prevent false alarm due to power outages.