Avalue Technology LPC-1232 User manual

Part No. E2017L220A0R
LPC-1232/1532
12.1"/15" 6th Gen Intel® Core™ SoC ULT Processor i7/i5/i3
Touch Panel PC
Quick Reference Guide
1st Ed –28 March 2016
Copyright Notice
Copyright 2016 Avalue Technology Inc., ALL RIGHTS RESERVED.

LPC-1232/1532
2 LPC-1232/1532 Quick Reference Guide
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
Notice
This guide is designed for experienced users to setup the system within the shortest time.
For detailed information, please always refer to the electronic user's manual.
Copyright Notice
Copyright 2016 Avalue Technology Inc., ALL RIGHTS RESERVED.
No part of this document may be reproduced, copied, translated, or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the prior written
permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective
owners.
Disclaimer
Avalue Technology Inc. reserves the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in order to improve
design and/or performance. Avalue Technology assumes no responsibility or liability for the
use of the described product(s), conveys no license or title under any patent, copyright, or
masks work rights to these products, and makes no representations or warranties that

Quick Reference Guide
LPC-1232/1532 Quick Reference Guide
3
these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified. Applications that are described in this manual are for illustration
purposes only. Avalue Technology Inc. makes no representation or warranty that such
application will be suitable for the specified use without further testing or modification.
Life Support Policy
Avalue Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN
LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL
OF Avalue Technology Inc.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for
surgical implant into body, or (b) support or sustain life and whose failure to perform,
when properly used in accordance with instructions for use provided in the labeling, can
be reasonably expected to result in significant injury to the user.
2. A critical component is any component of a life support device or system whose
failure to perform can be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or effectiveness.
A Message to the Customer
Avalue Customer Services
Each and every Avalue’s product is built to the most exacting specifications to ensure
reliable performance in the harsh and demanding conditions typical of industrial
environments. Whether your new Avalue device is destined for the laboratory or the factory
floor, you can be assured that your product will provide the reliability and ease of operation
for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.avalue.com.tw/

LPC-1232/1532
4 LPC-1232/1532 Quick Reference Guide
Content
1. Getting Started ........................................................................................................5
1.1Safety Precautions....................................................................................................5
1.2 Packing List...............................................................................................................5
1.3 System Specifications...............................................................................................6
1.4 System Overview......................................................................................................8
1.4.1 Top View.................................................................................................................................. 8
1.4.2 Bottom View............................................................................................................................. 8
1.5 System Dimensions ................................................................................................10
1.5.1 LPC-1232 Front and Rear side.............................................................................................. 10
1.5.2 LPC-1532 Front and Rear side.............................................................................................. 11
2. Hardware Configuration .......................................................................................12
2.1 LPC-1232/1532 connector mapping........................................................................13
2.1.1 Serial port 1/2 connector (COM1/2)....................................................................................... 13
2.2 Installing Hard Disk & Memory (For LPC-1232) .......................................................14
2.3 Installing Hard Disk & Memory (For LPC-1532) .......................................................16

Quick Reference Guide
LPC-1232/1532 Quick Reference Guide
5
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
1 x LPC-1232/1532 Panel PC
1 x DVD-ROM contains the followings:
—User’s Manual (this manual in PDF file)
—Ethernet driver and utilities
—VGA drivers and utilities
—Audio drivers and utilities
—WiFi drivers and utilities
—Touch controller drivers and utilities
—Chipset drivers and utilities
1 x Power Adapter
1 x Stand for Panel PC (optional)

LPC-1232/1532
6 LPC-1232/1532 Quick Reference Guide
1.3 System Specifications
Component
Model
LPC-1232
LPC-1532
Mother Board
EBM-SKLU
CPU
Onboard 6th Gen Intel® Core™ SoC i7/i5/i3 BGA Processor
Memory
One 260-pin DDR4 SODIMM Socket Supports Up to 32GB DDR4 2133 SDRAM
Adapter
+12 Vdc / 5 A (60W)
Wireless LAN
Optional USB/MPCIe WiFi module
TPM
Optional TPM 2.0 & 1.2
Storage
Hard Disk Drive
One 2.5" SATA HDD
Solid State Drive
Optional 2.5" SATA SSD
Other Storage Device
Optional mSATA
Panel
LCD Panel
12", 4:3, XGA
15", 4:3, XGA
B/L Inverter/Converter
Built in LED backlight
Touch Screen
5 Wires resistive
Touch Controller
Onboard USB (EETI)
External I/O
Serial Port
2 x RS-232/422/485
USB Port
4 x USB 3.0
Audio Port
1 x Line-out Realtek ALC233
LAN Port
1 x Intel I210AT GbE controller
1 x Intel I219LM Gigabit Ethernet PHY
Wireless LAN
Antenna
Reserved 1 for WiFi or 3G antenna
Speaker Output
N/A
2 x 1W
Indicator Light
LED for Power, HDD
Expansion Slots
2 x Mini PCIe
Mechanical
Power Type
AT/ATX
Power Connector
Type
DC in
Dimension
283 x 222 x 45 mm
351.5 x 272 x 52 mm
Weight
2.84 Kgs
4.2 Kgs
Color
Front Silver & Rear panel Black
Fanless
Yes
Reliability

Quick Reference Guide
LPC-1232/1532 Quick Reference Guide
7
EMI Test
Class B
Safety
CE FCC
Dust and Rain Test
IP65
Vibration Test
Random Vibration Operation: IEC 60068-2-64
Sine Vibration test (Non-operation): IEC 60068-2-6
Package vibration test: IEC 60068-2-64
Mechanical Shock
Test
Bump Test: IEC 60068-2-29
Drop Test
IEC-60068-2-32
Operating
Temperature
-10 to 50°C
Operating Humidity
5% ~ 90% relative humidity, non-condensing
Storage Temperature
-20 to 60°C
Note: Specifications are subject to change without notice.

LPC-1232/1532
8 LPC-1232/1532 Quick Reference Guide
1.4 System Overview
1.4.1 Top View LPC-1232
LPC-1532
1.4.2 Bottom View LPC-1232
LPC-1532
Connectors
Label
Function
Note
POWER
Power on button
COM1/2
Serial port 1/2 connector
DB-9 male connector
LINE OUT
Line-out audio jack
USB
4 x USB 3.0 connector
Dock USB
LAN1/2
RJ-45 Ethernet connector 1/2
HDD
HDD indicator

Quick Reference Guide
LPC-1232/1532 Quick Reference Guide
9
PWR
System power indicator
HDMI
HDMI connector
RESET
Reset button
DC IN
DC Power-in connector

LPC-1232/1532
10 LPC-1232/1532 Quick Reference Guide
1.5 System Dimensions
1.5.1 LPC-1232 Front and Rear side
(Unit: mm)

Quick Reference Guide
LPC-1232/1532 Quick Reference Guide
11
1.5.2 LPC-1532 Front and Rear side
(Unit: mm)

LPC-1232/1532
12 LPC-1232/1532 Quick Reference Guide
2.Hardware
Configuration
For advanced information, please refer to:
1- EBM-SKLU User’s Manual
Note: If you need more information, please visit our website:
http://www.avalue.com.tw

Quick Reference Guide
LPC-1232/1532 Quick Reference Guide
13
2.1 LPC-1232/1532 connector mapping
2.1.1 Serial port 1/2 connector (COM1/2)
Note:
RS-232 mode is default, RS-422 and RS-485 changed
setting by Switch(SW1) and jumper(JCOM_SEL1,
JCOM_SEL2).
RS-232
Signal
PIN
PIN
Signal
DCD#
1
6
DSR#
RXD
2
7
RTS#
TXD
3
8
CTS#
DTR#
4
9
RI#
GND
5
RS-422
Signal
PIN
PIN
Signal
422_Tx-
1
6
NC
422_Rx+
2
7
NC
422_Tx+
3
8
NC
422_Rx-
4
9
NC
GND
5
RS-485
Signal
PIN
PIN
Signal
485_Tx-
1
6
NC
NC
2
7
NC
485_Tx+
3
8
NC
NC
4
9
NC
GND
5

LPC-1232/1532
14 LPC-1232/1532 Quick Reference Guide
2.2 Installing Hard Disk & Memory (For LPC-1232)
Step 1. Unfasten 6 screws from the case. Then take off the top chassis.
Step 2. Memory Installation: Insert the SODIMM into the memory socket.

Quick Reference Guide
LPC-1232/1532 Quick Reference Guide
15
Step 3-1. SATA HDD Installation: By default, the SATA cables had been inserted to the
according connectors. Just connect to SATA HDD with the two cables.
Step 3-2. Insert the HDD into the Drive Bay. Remember to place the HDD down to the
bottom exactly in order to screw the device tightly.
Step 4. Place back the chassis with 6 screws locked.
HDD
SATA connector 1
MPCIE connector

LPC-1232/1532
16 LPC-1232/1532 Quick Reference Guide
2.3 Installing Hard Disk & Memory (For LPC-1532)
Step 1. Unfasten 6 screws from the case. Then take off the top chassis.
Step 2. Memory Installation: Insert the SODIMM into the memory socket.

Quick Reference Guide
LPC-1232/1532 Quick Reference Guide
17
Step 3-1. HDD Installation: Unfasten 2 screws of the HDD bracket and take it off.
Step 3-2. Insert the HDD into the bracket and fasten 4 screws.
Step 3-3. SATA HDD Installation: By default, the SATA cables had been inserted to the
according connectors. Just connect to SATA HDD with the two cables.
SATA connector 1
MPCIE connector

LPC-1232/1532
18 LPC-1232/1532 Quick Reference Guide
Step 3-4. Insert the HDD into the Drive Bay. Remember to place the HDD down to the bottom
exactly in order to screw the device tightly.
Step 4. Place back the chassis with 6 screws locked.
HDD