Avalue Technology FPC-1736 User manual

Part No. E2017F176A0R
FPC-1736
17” Flexibility Multifunctional Touch Panel PC
Quick Reference Guide
1st Ed –03 November 2022
Copyright Notice
Copyright 2022 Avalue Technology Inc., ALL RIGHTS RESERVED.

FPC-1736
2 FPC-1736 Quick Reference Guide
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
Notice
This guide is designed for experienced users to setup the system within the shortest time.
For detailed information, please always refer to the electronic user's manual.
Copyright Notice
Copyright 2022 Avalue Technology Inc., ALL RIGHTS RESERVED.
No part of this document may be reproduced, copied, translated, or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the prior written
permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective
owners.
Disclaimer
Avalue Technology Inc. reserves the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in order to improve
design and/or performance. Avalue Technology assumes no responsibility or liability for the
use of the described product(s), conveys no license or title under any patent, copyright, or
masks work rights to these products, and makes no representations or warranties that

Quick Reference Guide
FPC-1736 Quick Reference Guide
3
these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified. Applications that are described in this manual are for illustration
purposes only. Avalue Technology Inc. makes no representation or warranty that such
application will be suitable for the specified use without further testing or modification.
Life Support Policy
Avalue Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN
LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL
OF Avalue Technology Inc.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for
surgical implant into body, or (b) support or sustain life and whose failure to perform,
when properly used in accordance with instructions for use provided in the labeling, can
be reasonably expected to result in significant injury to the user.
2. A critical component is any component of a life support device or system whose
failure to perform can be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or effectiveness.
A Message to the Customer
Avalue Customer Services
Each and every Avalue’s product is built to the most exacting specifications to ensure
reliable performance in the harsh and demanding conditions typical of industrial
environments. Whether your new Avalue device is destined for the laboratory or the factory
floor, you can be assured that your product will provide the reliability and ease of operation
for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.avalue.com.tw/

FPC-1736
4 FPC-1736 Quick Reference Guide
Content
1. Getting Started ........................................................................................................6
1.1 Safety Precautions....................................................................................................6
1.2 Packing List...............................................................................................................6
1.3 System Specifications...............................................................................................7
1.4 System Overview....................................................................................................10
1.4.1 Bottom View........................................................................................................................... 10
1.5 System Dimensions ................................................................................................11
2. Hardware Configuration .......................................................................................12
2.1.1 Serial port connector 1/2/3 (COM)......................................................................................... 13
2.1.2 Serial port connector 4 (COM/USB)...................................................................................... 13
2.3 Motherboard Overviews..........................................................................................16
2.4 Motherboard Jumper and Connector list.................................................................17
2.5 Motherboard Jumpers & Connectors settings.........................................................19
2.5.1 Clear CMOS RAM Settings (JBAT)....................................................................................... 19
2.5.2 ATX Mode/ AT Mode Select (JAT_ATX)............................................................................... 19
2.5.3 ME Features Select (JP2) ..................................................................................................... 20
2.5.4 Case Open Message Display Function (COPEN)................................................................. 20
2.5.5 LVDS Inverter Backlight VCC Select (JP16)......................................................................... 21
2.5.6 LVDS Inverter Header (INVERTER1) ................................................................................... 21
2.5.7 COM1 Pin9 Function Select (JP12)....................................................................................... 22
2.5.8 COM2 Pin9 Function Select (JP13)....................................................................................... 22
2.5.9 Internal 12V~24V Power Connector (DCIN3)........................................................................ 23
2.5.10 CPU Fan Connector (CPUFAN)............................................................................................ 23
2.5.11 System Fan Connector (SYSFAN)........................................................................................ 24
2.5.12 SATA III Port connector (SATA1).......................................................................................... 24
2.5.13 SATA Power Out Connector (PWROUT).............................................................................. 25
2.5.14 Front Panel Header (FP)....................................................................................................... 25
2.5.15 USB 2.0 Port Headers (FP_USB1/FP_USB2) ...................................................................... 26
2.5.16 USB 2.0 Port Header (FP_USB3) ......................................................................................... 26
2.5.17 PS/2 Keyboard & Mouse Header (PS2KBMS)...................................................................... 27
2.5.18 SMBUS Header (SMBUS)..................................................................................................... 27
2.5.19 Front Panel Audio Header (*FP_AUDIO).............................................................................. 28
2.5.20 3W Amplifier Wafer (*SPEAK_CON)..................................................................................... 28
2.5.21 RS232 Serial Port Header (COM1/2/3/4).............................................................................. 29

Quick Reference Guide
FPC-1736 Quick Reference Guide
5
2.5.22 GPIO Header (GPIO) ............................................................................................................ 29
2.5.23 LVDS Port Wafer (LVDS) ...................................................................................................... 30
2.5.24 LVDS Panel Power VCC Select (JP5)................................................................................... 31
3.BIOS Setup....................................................................................................................32
3-1 Entering Setup.......................................................................................................33
3-2 BIOS Menu Screen ...............................................................................................34
3-3 Function Keys........................................................................................................34
3-4 Getting Help ..........................................................................................................34
3-5 Menu Bars.............................................................................................................35
3-6 Main Menu ............................................................................................................35
3-7 Advanced Menu ....................................................................................................36
3-8 Chipset Menu ........................................................................................................46
3-9 Security Menu........................................................................................................48
3-10 Boot Menu.............................................................................................................50
3-11 Save & Exit Menu..................................................................................................51

FPC-1736
6 FPC-1736 Quick Reference Guide
1.Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections
while the power is on. Sensitive electronic components can be
damaged by sudden power surges. Only experienced electronics
personnel should open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution, use a
grounding wrist strap at all times. Place all electronic components
in a static-dissipative surface or static-shielded bag when they are
not in the chassis.
Risk of Explosion if Battery is replaced by an Incorrect Type.
Dispose of Used Batteries According to the Instructions.
Français:
Attention!
Débranchez le câble d'alimentation de votre châssis chaque fois
que vous travaillez avec le matériel. Ne faites pas de connexion
lorsque le système est allumé. Les composants électroniques
sensibles peuvent être endommagés par les surtensions
soudaines. Seule les personnels expérimentés de l'électronique
peuvent ouvrir le châssis du PC.
Précaution!
Il faut toujours mettre à la masse pour éliminer l’électricité statique
avant de toucher la carte CPU. Les appareils électroniques
modernes sont très sensibles aux électricité statique. Pour des
raisons de sécurité, utilisez un bracelet électrostatique. Placez
tous les composants électroniques sur une surface antistatique ou
dans un sac antistatique quand ils ne sont pas dans le châssis.
Risque d'explosion si la batterie est remplacée par un type
incorrect. Jetez les piles usagées selon les instructions
1.2 Packing List
1 x FPC-1736 Panel PC
1 x Power Adapter
4 x screws for VESA
8 x screws for HDD

Quick Reference Guide
FPC-1736 Quick Reference Guide
7
1.3 System Specifications
Component
CPU
Intel® LGA1151 Socket Supports 8th /9th refresh Generation Core™ Pentium®
/i7/ i5/ i3 Processors (Max. TDP at 65W)
CPU Cooler (Type)
Fan design
Memory
2* 260-pin DDR4 2666 MHz SO-DIMM socket, supports up to 64GB Max
Adapter
ACC-ADP-120N-10R
System Fan
Fan design, 12V, 60 x 60 x 25mm, D4P, 300mm, 7600RPM
Speaker
5W x 2
Wireless LAN
IEEE802.11 ax/ac/a/b/g/n 2.4 GHz, 5 GHz, 6 GHz (optional)
Bluetooth
BT5.2 (optional)
Operating System
Win10 64bit, Linux
Expansion Card
*1 x M.2 E-Key, support Wi-Fi module (optional)
Storage
Solid State Drive
1 x SATA III for SSD expansion
(Reserve space for 1 x 2.5” Drive Bay design)
Other Storage
Device
1 x M.2 M-key slot 2242 support SATA interface
Panel
LCD Panel
17" 1280*1024 250NITS
LCD Control Board
Built-in
B/L
Inverter/Converter
External
Touch Screen
17" PCAP Touch
Touch Controller
ILITEK
External I/O
Serial Port
RS232*4 (Optional)
USB Port
4 x USB 3.0
1 x USB 2.0 for USB dongle in the enclosure
3 x USB 2.0 (Optional)
DIO Port
1 x 8-bit GPIO
Video Port
1 x HDMI 1.4B
1 x VGA
*Support one type of video function at a time
Audio Port
1 x Line-out, 1 x Mic-in
LAN Port
1 x Intel i219-V Gigabit Ethernet
1 x Intel i225-V 2.5 Gigabit Ethernet

FPC-1736
8 FPC-1736 Quick Reference Guide
Wireless LAN
Antenna
WIFI 6E 2.4GHz~7.1GHz Antenna (optional)
Switch
Yes and option for 2 pin phoenix power switch
Expansion Slots
1 x PCI-ex4
Mechanical
Power Type
12~24V DC-in
Power Connector
Type
DC Jack and 2 pin phoenix power connection
*Only can use one type of connector at the same time
Dimension
392.72 x 325.32 x 121.55 mm
Weight
7.5 Kg
Color
Black
Fanless
No
OS Support
Windows 10 64bits, Linux
Reliability
EMI Test
CE/FCC Class A/CCC
Vibration Test
Random Vibration Operation
1 Test PSD : 0.00454G²/Hz , 1.5 Grms
2 System condition : operation mode
3 Test frequency : 5~500 Hz
4 Test axis : X,Y and Z axis
5 Test time : 30 minutes per each axis
6 IEC60068-2-64 Test Fh
6 Storage : mSATA
Sine Vibration test (Non-operation)
1 Test Acceleration : 2G
2 Test frequency : 5~500 Hz
3 Sweep：1 Oct/ per one minute. (logarithmic)
4 Test Axis : X,Y and Z axis
5 Test time :30 min. each axis
6 System condition : Non-Operating mode
7. Reference IEC 60068-2-6 Testing procedures
Package Vibration Test:
1 Test PSD : 0.026G²/Hz , 2.16 Grms
2 Test frequency : 5~500 Hz
3 Test axis : X,Y and Z axis
4 Test time : 30 minutes per each axis
5 IEC 60068-2-64 Test Fh
Mechanical Shock
1 Wave from : Half Sine wave

Quick Reference Guide
FPC-1736 Quick Reference Guide
9
Test
2 Acceleration Rate : 10g for operation mode
3 Duration Time : 11ms
4 No. of shock : Z axis 300 times
5 Test Axis : Z axis
6 operation mode
7 Reference IEC 60068-2-27 testing procedures
Test Eb : Shock Test
Drop Test
Package drop test
Reference ISTA 2A, Method : IEC-60068-2-32 Test:Ed
Test Ea : Drop Test
1 Test phase : One corner, three edges, six faces
2 Test high : 96.5cm
3 Package weight : 7.5 Kg
4 Test drawing
Operating
Temperature
0 ~ 45°C
*Air flow=0.7 m/s
Operating Humidity
40°C @ 95% Relative Humidity, Non-condensing
Storage
Temperature
-20°C ~ 60°C
Power
Consumption
Max. load 101.21 W with intel core i7-9700E/4GB/64GB(M.2 SSD)/64BG(2.5”
SSD), DC-in 19V
Note: Specifications are subject to change without notice.

FPC-1736
10 FPC-1736 Quick Reference Guide
1.4 System Overview
1.4.1 Bottom View
Connectors
Label
Function
Note
Power Switch
Power on button
DC Jack-in (12~24V)
DC power-in connector
DC Phoenix
connector in
DC power-in connector
COM1/2/3
Serial port connector 1/2/3
COM4/USB
Serial port connector 4
USB 2.0 connector (Optional)
Foreseen hole(Default)
Line-out
Line-out audio jack (Optional)
Mic-in
Mic-in audio jack (Optional)
USB 3.0
4 x USB 3.0 connector
USB 2.0
1 x USB 2.0 for USB dongle in the
enclosure
3 x USB 2.0 (Optional)
LAN1
RJ-45 Ethernet connector 1
LAN2
RJ-45 Ethernet connector 2
VGA
VGA connector
HDMI
HDMI connector

Quick Reference Guide
FPC-1736 Quick Reference Guide
11
1.5 System Dimensions
(Unit: mm)

FPC-1736
12 FPC-1736 Quick Reference Guide
2. Hardware
Configuration
Note: If you need more information, please visit our website:
http://www.avalue.com.tw

Quick Reference Guide
FPC-1736 Quick Reference Guide
13
2.1 FPC-1736 connector mapping
2.1.1 Serial port connector 1/2/3 (COM)
Signal
PIN
PIN
Signal
DCD
1
6
DSR
RXD
2
7
RTS
TXD
3
8
CTS
DTR
4
9
RI
GND
5
2.1.2 Serial port connector 4 (COM/USB)
Signal
PIN
PIN
Signal
DCD
1
6
DSR
RXD
2
7
RTS
TXD
3
8
CTS
DTR
4
9
RI
GND
5

FPC-1736
14 FPC-1736 Quick Reference Guide
2.2 Installing PCIe devices (FPC-1736)
Step 1. Remove 16 screws to release the chassis cover, and remove it.

Quick Reference Guide
FPC-1736 Quick Reference Guide
15
Step 2. Install the expansion module and fasten screw.

FPC-1736
16 FPC-1736 Quick Reference Guide
2.3 Motherboard Overviews

Quick Reference Guide
FPC-1736 Quick Reference Guide
17
2.4 Motherboard Jumper and Connector list
Jumper
Label
Function
Note
JBAT
Clear CMOS RAM Settings
3 x 1 header, pitch 2.00mm
JAT_ATX
ATX/AT Mode Select
3 x 1 header, pitch 2.00mm
JP2
ME Features Select
2 x 1 header, pitch 2.00mm
COPEN
Case Open Message Display Function
2 x 1 header, pitch 2.00mm
JP5
Panel Power VCC Select
3 x 2 header, pitch 2.00mm
JP16
Inverter Backlight VCC Select
2 x 1 header, pitch 2.00mm
JP12
COM1 Port Pin9 Function Select
3 x 2 header, pitch 2.00mm
JP13
COM2 Port Pin9 Function Select
3 x 2 header, pitch 2.00mm
Connectors
Label
Function
Note
DCIN1
12V~24V DC–in Power Jack
VGA
VGA Port Connector
HDMI
HDMI Port Connector
USB1/USB2
USB 3.0 Port Connector X4
LAN1
1.0Gbps RJ-45 LAN Connector
LAN 2
2.5Gbps RJ-45 LAN Connector
*HMIC
Audio MIC Connector
*HOUT
Audio Line-out Connector
DCIN3
Internal 12V~24V DC–in Power Connector
SATA1
SATAIII Connector
PWROUT
SATA Power-out Connector
CPUFAN
CPUFAN Connector
SYSFAN
System Fan Connector
FP
Front Panel Header(PWR LED/ HD
LED/Power Button /Reset)
2 x 5 header, pitch 2.54mm
FP_USB1/
FP_USB2
USB 2.0 Port Headers
2 x 5 header, pitch 2.00mm
FP_USB3
USB 2.0 Port Header
4 x 1 header, pitch 2.00mm
PS2KBMS
PS/2 Keyboard & Mouse Header
6 x 1 header, pitch 2.00mm
SMBUS
SMBUS Header
5 x 1 header, pitch 2.00mm
*FP_AUDIO
Front Panel Audio Header
2 x 5 header, pitch 2.00mm

FPC-1736
18 FPC-1736 Quick Reference Guide
*SPEAK_CON
3W Amplifier Wafer
4 x 1 wafer, pitch 2.00mm
COM1/2/3/4
RS232 Serial Port Headers
2 x 5 header, pitch 2.00mm
GPIO
GPIO Port Header
2 x 5 header, pitch 2.54mm
LVDS
LVDS Port Wafer
2 x 15 wafer, pitch 1.25mm
INVERTER1
LVDS Inverter Wafer
6 x 1 wafer, pitch 2.00mm
eDP
eDP Port Wafer
2 x 15 wafer, pitch 1.25mm

Quick Reference Guide
FPC-1736 Quick Reference Guide
19
2.5 Motherboard Jumpers & Connectors settings
2.5.1 Clear CMOS RAM Settings (JBAT)
* Default
JBATClear CMOS
1-2 Closed: Normal(Default)*
2-3 Closed: Clear CMOS Settings
2.5.2 ATX Mode/ AT Mode Select (JAT_ATX)
* Default
JAT_ATXATX/AT Mode Select
1-2 Closed: ATX Mode Selected(Default)*
2-3 Closed: AT Mode Selected
*ATX Mode Selected: Press power button to power on after power input ready;
AT Mode Selected: Directly power on as power input ready.
JBAT

FPC-1736
20 FPC-1736 Quick Reference Guide
2.5.3 ME Features Select (JP2)
* Default
JP2ME Features Select
1-2 Open: Enable ME Features*
1-2 Closed: Disable ME Features
2.5.4 Case Open Message Display Function (COPEN)
COPENCase Open Detection
Pin 1-2 Short:When Case open function pin short to GND, the Case open function was
detected. When Used, needs to enter BIOS and enable ‘Case Open Detect’ function. In this
case if your case is removed, next time when you restart your computer, a message will be
displayed on screen to inform you of this.