Avalue Technology MTP-1233 How to use

Part No. E2017M230A1R
MTP-1233
12.1” Fanless Touch Panel PC
Quick Reference Guide
2nd Ed –05 March, 2020
Copyright Notice
Copyright © 2020 Avalue Technology Inc., ALL RIGHTS RESERVED.

MTP-1233
2 MTP-1233 Quick Reference Guide
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
Notice
This guide is designed for experienced users to setup the system within the shortest time.
For detailed information, please always refer to the electronic user's manual.
Copyright Notice
Copyright 2020 Avalue Technology Inc., ALL RIGHTS RESERVED.
No part of this document may be reproduced, copied, translated, or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the prior written
permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective
owners.
Disclaimer
Avalue Technology Inc. reserves the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in order to improve
design and/or performance. Avalue Technology assumes no responsibility or liability for the
use of the described product(s), conveys no license or title under any patent, copyright, or
masks work rights to these products, and makes no representations or warranties that

Quick Reference Guide
MTP-1233 Quick Reference Guide
3
these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified. Applications that are described in this manual are for illustration
purposes only. Avalue Technology Inc. makes no representation or warranty that such
application will be suitable for the specified use without further testing or modification.
Life Support Policy
Avalue Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN
LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL
OF Avalue Technology Inc.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for
surgical implant into body, or (b) support or sustain life and whose failure to perform,
when properly used in accordance with instructions for use provided in the labeling, can
be reasonably expected to result in significant injury to the user.
2. A critical component is any component of a life support device or system whose
failure to perform can be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or effectiveness.
A Message to the Customer
Avalue Customer Services
Each and every Avalue’s product is built to the most exacting specifications to ensure
reliable performance in the harsh and demanding conditions typical of industrial
environments. Whether your new Avalue device is destined for the laboratory or the factory
floor, you can be assured that your product will provide the reliability and ease of operation
for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.avalue.com.tw/

MTP-1233
4 MTP-1233 Quick Reference Guide
Contents
1. Getting Started............................................................................................................5
1.1 Safety Precautions ................................................................................................5
1.2 Packing List...........................................................................................................5
1.3 System Specifications ...........................................................................................6
1.4 System Overview...................................................................................................9
1.4.1 Rear View..................................................................................................................................... 9
1.5 System Dimensions.............................................................................................10
2. Hardware Configuration...........................................................................................11
2.1 MTP-1233 connector setting ...............................................................................12
2.1.1 Serial port connector 1/2 (COM1/2)........................................................................................... 12

Quick Reference Guide
MTP-1233 Quick Reference Guide
5
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
1 x MTP-1233 Panel PC

MTP-1233
6 MTP-1233 Quick Reference Guide
1.3 System Specifications
Component
Mother Board
EBM-APL
CPU
Onboard Intel® Apollo Lake Mobile Processor N4200
CPU Cooler (Type)
Fanless Heatsink
Memory
4GB DDR3L SO-DIMM
(One 204-pin DDR3L SODIMM Socket, Supports Up to 8GB DDR3L
1866MTs SDRAM (Non-ECC))
Power Supply
External power adapter
60W Adapter
Not included
Power Requirement
+12 ~ 26V
System Fan
Fanless
Speaker
2W x 2
Wireless LAN
ACC-MPCIE-WIFI-06R SparkLan WPEA-121N
Operating System
Win10 IoT Ent LTSB 2016 MultiLang OEI Entry EPKEA (ESD) ESW-060R
Storage
Solid State Drive
1 x 2.5” Drive Bay
128GB SSD
Panel
LCD Panel
12.1" XGA TFT LED PANEL CMO G121X1-L03
1024 x 768 pixels
Touch Screen
Touch panel 5 wire Analog RoHS
T121S-5RB014N-0A18R0-200FH
Touch Controller
USB touch (EETI)
External I/O
Serial Port
2 x RS-232/422/485
USB Port
Side USB 2.0 * 2 Ports
Rear USB 3.0 * 4 Ports
Audio Port
1 x Line-Out
LAN Port
2 x RJ-45
Wireless LAN
Antenna
PCB Antenna 2.4/5.0GHz-IPEX Ø 1.13mm 50cm x 2
Others
1 x HDMI
Mechanical
Power Type
AT/ATX (ATX is default setting)
Power Connector
Type
Lockable DC Jack

Quick Reference Guide
MTP-1233 Quick Reference Guide
7
Dimension
260 x 310 x 51mm
Weight
2.3 kg
Color
CoolGray2C Plastic Front & Rear
Fanless
Yes
Reliability
EMI Test
FCC
Dust and Rain Test
IP-65 on Front Panel
Vibration Test
Ramdom Vibration Operation
Reference IEC60068-2-64 Testing procedures
Test Fh : Vibration boardband random Test
1 Test PSD : 0.00454G²/Hz , 1.5 Grms
2 Test frequency : 5~500 Hz
3 Test axis : X,Y and Z axis
4 Test time : 30 minutes each axis
5 System condition : operation mode
6 Test curve
Sine Vibration Test
Reference IEC60068-2-6 Testing procedures
Test Fc : Vibration sinusoidal
1 Test Acceleration : 2G
2 Test frequency : 5~500 Hz
3 Sweep：1 Oct/ per one minute. (logarithmic)
4 Test axis : X,Y and Z axis
5 Test time :30 min. each axis
6 System condition : Non-Operating mode
7 Test curve
Package Vibration Test:
Reference IEC60068-2-64 Testing procedures
Test Fh : Vibration boardband random Test
1 Test PSD : 0.026G²/Hz , 2.16 Grms
2 Test frequency : 5~500 Hz
3 Test axis : X,Y and Z axis
4 Test time : 30 minutes each axis
5 Test curve
Mechanical Shock
Test
With CF/SSD: 10Grms, IEC 60068-2-27, Half Sine, 11ms
Drop Test
Package drop test
Reference ISTA 2A, Method : IEC-60068-2-32 Test:Ed
Test Ea : Drop Test
1 Test phase : One corner, three edges, six faces

MTP-1233
8 MTP-1233 Quick Reference Guide
2 Test high :
3 Package weight :
4 Test drawing
Operating
Temperature
Normal Temperature: 0°C ~ 40°C (32°F ~ 104°F)
Operating Humidity
40°C @ 95% Relative Humidity, Non-condensing
Storage
Temperature
Normal Temperature: -20°C ~ 60°C
Note: Specifications are subject to change without notice.

Quick Reference Guide
MTP-1233 Quick Reference Guide
9
1.4 System Overview
1.4.1 Rear View
Connectors
Label
Function
Note
DC IN
DC-in power connector
Reset
Reset button
HDMI
HDMI connector
HDD
HDD LED
PWR
Power LED
LAN1/2
RJ-45 Ethernet connector 1/2
USB2.0
4 x USB 2.0 connector
COM1/2
Serial port connector 1/2
DB-9 male connector

MTP-1233
10 MTP-1233 Quick Reference Guide
1.5 System Dimensions
(Unit: mm)

Quick Reference Guide
MTP-1233 Quick Reference Guide
11
2.Hardware
Configuration
Please refer to EBM-APL User’s Manual for further information.
Note: If you need more information, please visit our website:
http://www.avalue.com.tw

MTP-1233
12 MTP-1233 Quick Reference Guide
2.1 MTP-1233 connector setting
2.1.1 Serial port connector 1/2 (COM1/2)
Signal
PIN
PIN
Signal
DCD#
1
6
DSR#
RXD
2
7
RTS#
TXD
3
8
CTS#
DTR#
4
9
RI#
GND
5